sofar this mobo BLOWS
raid wount work!
and i get a GAY warning when applying more that 1.6v to my proc
sofar this mobo BLOWS
raid wount work!
and i get a GAY warning when applying more that 1.6v to my proc
Hopefully next BIOS will fix this. This is why I moved my OS from RAID to a single HDD. But yes, it really sucks not having RAID with high OCs.Quote:
Originally Posted by billdavis
dude please be a bro and post your jumpfree settings!!!Quote:
Originally Posted by nicepun
ASUS we need new BIOS stat!!!!
After doing some memory timings tweakings, the Superpi32M 12m11.937s result is not bad. :)
PS: No MAXMEM set, LargeSystemCache = 0
http://img77.imageshack.us/img77/639...m11937svf7.jpg
nice scores TinTin.. :)
hey weekends are coming.. :) I'll wait for more of your results..
I will nonight.Quote:
Originally Posted by billdavis
Tin Tin I hope it's o.k. if I post my settings here I don't want to hijack your thread. Also, I just got a different Q6600 G0, I can't remeber the FPO batch but the Packdate is 08/04/07 and It was a L273A6xx (I can't remember the last two numbers).
What strap are you guys on? I'm on the 266 for my Q6600 on this board. Sorry for the thread hijack.
Fantastic work on this review. What an asset.
Same stepping as you :). L724A 7/13/2007
Any intial thoughts on which mobo is better? The p5k preminum or the dfi p35?
Nice reviews :up:
I had no problem installing on RAID 0 with the original BIOS (0112?) or the newest. However, boot time into XP is noticably slower than my 939 system.
hey TinTin any new screenies.. :D hehehe
For Quadcore, i recommend P5K Premium ;)Quote:
Originally Posted by Darks0ulz
It comes more,Quote:
Originally Posted by erwinz
CL4-4-4-12 DDR1200 @2.55V, superpi 1M passed, a quickrun direct boot into windows
My rams are not so strong, but only on this MB can do such benchmark :)
It is running at Performance level =5, and not so-relaxed sub-imings :D
Superpi1M passed
http://img264.imageshack.us/img264/1...perpi1mbl7.jpg
http://img251.imageshack.us/img251/5...perpi1muo4.jpg
Sandra Bandwidth 8173/8177MB/s
http://img264.imageshack.us/img264/6...ndrabanqb0.jpg
Nice work. This is the board and proc I want to buy as well. Thanks.:D
4.3Ghz Q6600 G0 damn :up: :bounces: :banana:
I played this with some ice water :D
here we go, start from 475X9: 4275MHz, idle temp: 11C, 11C, 7C, 10C
Vcore = 1.700V (BIOS) <==max in BIOS :(
actual = 1.664V (idle)
http://img267.imageshack.us/img267/2...dletempsa2.jpg
4367MHz pass superpi 1M
http://img411.imageshack.us/img411/2...erpi1mamb1.jpg
4438MHz cpuz validation
http://img267.imageshack.us/img267/2...idationrc5.jpg
already maxed-out the Vcore, can't push the chip :D
Very nice work indeed. Hey, I forgot to ask what PSU you're using?
Just changed to Silverstone OP650 for about one week, before was a Topower OEM 600W :)Quote:
Originally Posted by nicepun
I have P5K Premium and Q6600 G0, too.
I also have 2x1GB DDr2 1066 Crucial BallistiX Tracer (goes 1200mhz+ with stock 2.2V).
I don't know why I cannot pass 460-470FSB for the CPU. There is a limitation in the CPU?
The cpu goes 3800mhz and maybe more, as long as I don't pass 470FSB..
Maybe there are some special settings to do in bios ?
YES, quads tend to have FSB limitations, only a few can do over 500FSB, most stay between 460 to 490.Quote:
Originally Posted by MarcusXP
As I told you there is a cpu fsb wall..Quote:
Originally Posted by MarcusXP
any success with 2:3 ratio ?
Great tests!
I'm considering buying one, but I want a fsb up to approx. 550. Can these boards - or your board - do that?