Pretty cases! Is there room to put cables behind the board plate?
Printable View
Pretty cases! Is there room to put cables behind the board plate?
thank youQuote:
you can invert the psu plate on the v2000 which puts the psu directly under the divider.
No, the motherboard tray is pretty much right up against the back panel. You could probably get SATA cables back there, and fan extensions for sure, but thats pretty much the limit I think.Quote:
Originally Posted by Jodiuh
Here's my contribution to this thread :)
http://i13.tinypic.com/43rcykh.jpg
http://i14.tinypic.com/4g7ynb6.jpg
Thanks, I'll keep waiting for Coolermaster's RC-690 then.Quote:
Originally Posted by technodanvan
There's not room behind the motherboard to coil up extra unused leads but there's room to route all the motherboard cabling. I've fitted all the board connections to come through cuts behind the board in the smallest of the V- series cases. There's 10mm of space behind.Quote:
Originally Posted by Jodiuh
looks very nice rick_fx only thing i don't like is the un-sleeved psu cable's sleeving them or investing in a modular psu would clean up the case very nicely.Besides that looks awesome!!!
All that with only one pump? and a D5? Wouldn't a DDC be better with the restriction 3 rads and 4 blocks will give? Shouldn't it use more than one pump?Quote:
Originally Posted by disruptfam
Have any pics of this? I'd very much like to see how you did it and try it myself. I could see maybe getting the 8-pin EPS cable back there, but I can't imagine the 24-pin would fit unless I unsleeved it and flattened it out a bit.Quote:
Originally Posted by Jedda
Yes i assume it would. but splitting into 2 loops with give the most benefit.Quote:
All that with only one pump? and a D5? Wouldn't a DDC be better with the restriction 3 rads and 4 blocks will give? Shouldn't it use more than one pump?
By the way that's not my pc....
cheers
Thanks!Quote:
Originally Posted by disruptfam
I've just ordered a black sleeving kit, I'll post pics once I get the sleeving done :)
Good Stuff Rick_fx
For Now
Before
http://i196.photobucket.com/albums/aa3/Tboy012/N.I9.jpg
After
http://i196.photobucket.com/albums/a...2/IMG_0084.jpg
Still waiting for some parts to tidy things up
Is that VGA an 8800gts ? IMHO , you will fry your card, need sinksk on VRM's and NVIO i'd say, i have an HR 03+ and it gets quite hot even with a fan blowing over the sinks...Quote:
Originally Posted by lazy
Nice and clean setup BTW
Quote:
Originally Posted by Jedda
yes, what you basically need to do is make a cut on the horizontal divider (that splits between MB tray area and the lower PSU and HDD cage area) and then also make some cuts on the MB tray or at the edge of the tray such that there is more clearance.
i've been able to fit my 24 pin and all my other cables behind the mb tray.
hmm... sorry i've got no pics...
since we're all LianLi lovers...
here's mine...
finished profile shot...
http://i44.photobucket.com/albums/f9...0/IMG_1031.jpg
side view...
http://i44.photobucket.com/albums/f9...0/IMG_1030.jpg
opened up...
http://i44.photobucket.com/albums/f9...0/IMG_1018.jpg
my HDD wiring...
http://i44.photobucket.com/albums/f9...0/IMG_1016.jpg
shot of my fan shroud... *cough*Koolance*cough* style... :D
http://i44.photobucket.com/albums/f9...0/IMG_0991.jpg
radiator is a MCR320 btw...
nice stuff !!! im in the process of finishing my v2000 around 70% complete
I really like the way that 343 (is that the model?) fan grille blends in with the perf'ed front, very nice. Any thoughts on spray painting the inside framework black and maybe add those Lian-Li DVD bay covers? Or is the framework only visible in flash photography? I really like those cases, really searching for a reason to have 2 computers to make use of that pile of 'extra' parts...if I find one, the V-series is on the top of the list for a home for those.Quote:
Originally Posted by kinghong1970
Some nice rigs here... ive often considered grabbing a Lian Li... may well be my next case (between that and a Mountain Mods - depends on how much cash i have really!).
yes, i was seriously considering spray painting the internals but i counted too many rivets so i just gave up...Quote:
Originally Posted by AndyM
passed that case over to my bro and now i'm working on a new build based on CM Stacker 832... hope to have pics soon.
Geez, this thread soooo tempts me into buying a v2000b, if only I had the money....:(
Hey kinghong, what size of tubing are you using? Nice setup btw.
where im at the moment very messy still waiting on a hd cage an other stuff
http://img165.imageshack.us/img165/791/pcpics043bc6.jpg
stop being a tease and post more pictures!
the pic above is the only 1 i have worth posting atm