Xeon X3230 G0 - L713A290 ES

I have a Xeon X3230 G0 ES too. FSB wall at 450. maybe a little higher but can't reach 460 at 1.55 CPU Vcore. :mad:

wonder if it's the bioses aren't fully supporting Xeon based G0s ??

Quote:

---

Originally Posted by eva2000

wonder if it's the bioses aren't fully supporting Xeon based G0s ??

---

I thought the same. if i put the fsb further than 360*10, it is always restarting after 1 minute Primeing! CPU Vcore doesn't matter.

it's just a valid http://valid.x86-secret.com/show_oc.php?id=225238

hmmm could be the motherboard/bios limiting FSB why ?

Asus Blitz Extreme
E6600 L709A958 water = 485FSB max

Asus Commando
E6600 L709A958 phase change -41C = 567FSB max
E6600 B1 ES phase change = 540FSB max (on water 500FSB max)
E6700 L629079 phase change = 536FSB max (on water 514FSB max)

http://fileshosts.com/intel/Asus/Com..._validated.png

http://fileshosts.com/intel/Asus/Com...1.225/cpuz.png

Has anybody still overclocking Quadcore 65 nm Xeons?

Quote:

---

Originally Posted by Spacehead

Has anybody still overclocking Quadcore 65 nm Xeons?

---

look at the date of the post just before yours...
August 5,2007..Over a year and a 1/2 ago..:D

Quote:

---

Originally Posted by Movieman

look at the date of the post just before yours...
August 5,2007..Over a year and a 1/2 ago..:D

---

You point me to a thread which would be better for X3210 discussion?

This chip has 1.2125 VID

http://img5.imageshack.us/img5/4678/3400mhzstable.jpg

There is 3500 Mhz
http://img19.imageshack.us/img19/1962/3500mhzocct2h.jpg

Next 3600 Mhz, I hope I don't need to up the voltage too much, I'll try with this Vcore at first, then 1-2 notches up.