Xtreme Low Q6600 G0 Temp on Air !!! (Lots of Pics)

Printable View

Show 100 post(s) from this thread on one page

07-25-2007, 10:21 AM
XtremeTiramisu

Quote:

Originally Posted by michaLcoughliN

dont make me regret my purchase on my e6850

Hi michalcoughliN, I've seen you participating in the E6850 vs Q6600 or alike threads for the past weeks and I know you prefers a highly clocked E6x50 rather than G0 Q6600 but I'm the other way around. That's becouse I already have a golden E6700 that can be OC'ed to 3.8ghz stable at 1.46v underload. Hence, I don't want to take the risk of getting another C2D E6x50 and worry that if I'll fall into the no luck side like we all have read the thread "are all G0 too good OC'er..NO"

Well I gotta say believe what you originally believed it. I hope to see your highly OC'ed E6850 near 4ghz @ reasonable volts ;)

Quote:

Originally Posted by Envydia007

Subscribed for more OC result.

Next goal, 3.6ghz on air!
07-25-2007, 10:23 AM
XtremeTiramisu

Quote:

Originally Posted by michaLcoughliN

whats load temps like?

I've screenshots of all load temps 2400mhz, 3000mhz, and 3400mhz. scroll up pls:)
07-25-2007, 10:43 AM
zoob

Awesome results. I think I'm going to order a Q6600 as well.
07-25-2007, 10:46 AM
XtremeTiramisu

I call this stage a dream come true for air cooled quad! :D

http://img255.imageshack.us/img255/9...ometrueqc1.jpg
07-25-2007, 10:46 AM
zoob

:eek: :eek: :eek: :eek:
07-25-2007, 10:49 AM
K.I.T.T.

Sweet chip mate. That's definitely a keeper :up:

I'm thinking 3.8 GHz on air :D
07-25-2007, 10:51 AM
Xilikon

3.6 at only 1.35v ??? I will toss the damn pos board and get a P95 board like a P5K !!!

I bet you can go higher still...
07-25-2007, 10:58 AM
XtremeTiramisu

Quote:

Originally Posted by K.I.T.T.

Sweet chip mate. That's definitely a keeper :up:

I'm thinking 3.8 GHz on air :D

3.8ghz on air...I think I'm going to be the first one to get it stable and with reasonable volt / temp ;)

Quote:

Originally Posted by Xilikon

3.6 at only 1.35v ??? I will toss the damn pos board and get a P95 board like a P5K !!!

I bet you can go higher still...

Stable up to 14mins but just failed from one of the cores.
I may need to start some tweaking but it's being an easy OC up to 3.6ghz so far :)
07-25-2007, 10:58 AM
freeze888

Quote:

Originally Posted by XtremeTiramisu

I call this stage a dream come true for air cooled quad! :)

This is not fair ;_; Probably should have asked you before, are you stress testing using small FFT, large FFT or blend? Are you testing on a bench, open case or closed case?
07-25-2007, 11:18 AM
XtremeTiramisu

Quote:

Originally Posted by freeze888

This is not fair ;_; Probably should have asked you before, are you stress testing using small FFT, large FFT or blend? Are you testing on a bench, open case or closed case?

Easy there ;)
As you can see from the prime, it's small FFT, max load on CPU and little on rams. I've already known my max OC on my rams so it's out of the case now.

It's in close case but highly ventilated Antec 900 case.

Pleae refer to m sig for my complete air cooling method and configurations.
07-25-2007, 04:09 PM
justin_c

and this is from NCIX i presume? store or shipped?
run coretemp as admin on x64.
07-25-2007, 04:24 PM
mascaras

congrats , great chip tiramisu (3600mhz @ 1.35v) :up:
07-25-2007, 04:29 PM
dinos22

oh man so my guy was not far off at least with some retails being about the same as ES :up: :up: :up: :up: :up: :up: :up: :up: :up: :up:

1.35v @3.6Ghz on air

FAINTS

i don't believe the temps though>>> not doubting you but the fact something has changed with G0 temp reporting

it is impossible to idle below ambient temp so add another 20C if uncertain :D

btw QUAD and mobile CPUs have always had 100C tjunction
07-25-2007, 04:31 PM
CedricFP

Wow, 3.6 @ 1.35 - if P95 craps out after 14 min, I'd say that thing will run forever at 1.4v REAL (so allow for vdroop.)

Great chip.

I notice you have an A batch code - I wonder if "B" CPU's of the G0 series will generally clock better, like with the B2 and B3's.
07-25-2007, 05:31 PM
Kougar

Amazing results, but with one, possibly the current best air cooler too! If you can keep this up I'm going to stick with my intent to get a Q6600 instead of a E6850! An extra ~500Mhz OC isn't worth the loss of two cores to me :)
07-25-2007, 05:36 PM
erwinz

Quote:

Originally Posted by XtremeTiramisu

I call this stage a dream come true for air cooled quad! :)
http://i41.photobucket.com/albums/e2...amComeTrue.jpg

very nice temps.. :)

any news of the priming?? how many hours? and what voltage for 3.6 GHz??.. :)

:woot:
07-25-2007, 05:45 PM
-n7-

LOL can any of you guys even read?

As he explained, you need to add 15C to his temps to get the accurate results.

BTW, still extremely impressive results!
3600 MHz on air = wowsers :eek:
07-25-2007, 05:46 PM
dinos22

Quote:

Originally Posted by -n7-

LOL can any of you guys even read?

As he explained, you need to add 15C to his temps to get the accurate results.

BTW, still extremely impressive results!
3600 MHz on air = wowsers :eek:

his assumption is W.R.O.N.G. :)

what matters though is that he is stable at those clocks

temps we will disregard until people figure out what's changed with G0s
07-25-2007, 05:50 PM
-n7-

Quote:

Originally Posted by dinos22

his assumption is W.R.O.N.G. :)

what matters though is that he is stable at those clocks

temps we will disregard until people figure out what's changed with G0s

Well, wrong or not, we know there is no way it is loading @ 47C on air, lapped Ultra 120 eXtreme or not, unless he has it sitting in a freezer.
07-25-2007, 05:50 PM
XtremeTiramisu

The moment you all have being waiting for: 3.6ghz Prime stable on air!

1.38v loaded and *62c = 47c + 15c (Actual max Tjunction is 100c)
Ambient temp = 29c right now in the summer afternoon!
Overall it's one helluv killer chip! :D

Quote:

Originally Posted by unclewebb

I believe that SpeedFan 4.32 assumes a maximum junction temperature of 85C for the Quads when it should be using 100C. You need to add 15C to the SpeedFan reported temperatures.

Reported Temps = TjMax - DTS ( DTS is the on chip digital thermal sensor reading )

This guy on [H]forum explained better.
I'll try getting core temp 0.95 to work on my Vista x64. (I remember I did also tried run it as admin but to no avail..)

http://img255.imageshack.us/img255/9...ometrueqc1.jpg
07-25-2007, 05:53 PM
dinos22

29C ambient outside maybe

but not in your room :p:

look at your system/HDD temps

they should be in mid-high 30C should they not unless they are G0 revisions too :D :D :D :D

have you tried 3.7Ghz :D
07-25-2007, 05:55 PM
Kougar

N7, of course I can read. :yepp: With that extra 15c or not, it is impressive for air. Even with an extra 15c his temps are not much higher than my E6300 at 3.5Ghz, despite the higher clocks and 2x the cores with 4x the cache on them. Heck my temps match his when I hit 3.74Ghz, and I have a full blown WC loop for just the CPU.
07-25-2007, 05:58 PM
derekchinese

Awesome result tiramisu! Congratulations on your "Dream Come True"
I know you have good airflow in your case but how is the hard drive and system at ambient?

Hope to see even better results soon!
Derek
07-25-2007, 05:59 PM
Flinch

XtremeTiramisu,

On 64 bit Vista, all I do is *right click* the icon and choose run as admin...works for me everytime.
07-25-2007, 06:10 PM
-n7-

How to get Core Temp & various other appz to work in Vista 64:

Command prompt run as administrator (type cmd in start menu's search bar then right click & run as admin)

Type this:

Bcdedit.exe /set nointegritychecks ON

Reboot.

(That disables driver signing.)

http://img339.imageshack.us/img339/5...vista64nk0.jpg

Show 100 post(s) from this thread on one page