surely i will keep updating tonight i will do some cutting i will take pics and post for the world to see
Printable View
surely i will keep updating tonight i will do some cutting i will take pics and post for the world to see
Not bad keep going I like to see new Tj07 projects;)
I like it too! Keep them coming!Quote:
Originally Posted by RockfordFosgate
could you post some more shots of what your doing down in the bottom there, I was planning something similar for myself and I wanna see how your doing it.
TJ07's w/2 rads are nice, I'm keeping an eye on this thread :)
did some cutting work to the midsection of case and mixed g11 with distilled water and topped it off with pt nuke i think next i will mount pump
http://i187.photobucket.com/albums/x...cture005-1.jpg
http://i187.photobucket.com/albums/x...cture006-1.jpg
http://i187.photobucket.com/albums/x...Picture007.jpg
http://i187.photobucket.com/albums/x...Picture008.jpg
http://i187.photobucket.com/albums/x...Picture010.jpg
Looks great! Keep them coming!
construction halted for 2 days i ran out of cutting discs and my hole saw made a mess on part of case but promise to update you with more pics
so where are the promised pics?? :p
he is teasing us!
me tease never i thought i was goin to have to work today but it rained so i went to home depot brought more cutting discs and continued but i have hit a setback my psu cables are to short and wont reach motherboard so i have to find where they sell 8 pin mb extenders
http://i187.photobucket.com/albums/x...cture001-2.jpg
http://i187.photobucket.com/albums/x...cture002-2.jpg
http://i187.photobucket.com/albums/x...cture004-2.jpg
http://i187.photobucket.com/albums/x...cture005-2.jpg
http://i187.photobucket.com/albums/x...cture006-2.jpg
http://i187.photobucket.com/albums/x...cture007-1.jpg
http://i187.photobucket.com/albums/x...cture008-1.jpg
http://i187.photobucket.com/albums/x...Picture009.jpg
http://i187.photobucket.com/albums/x...cture010-1.jpg
http://i187.photobucket.com/albums/x...Picture011.jpg
Is the pic really blurry, or does that look like a really bad kink in the middle of the pic?
Quote:
Originally Posted by louie101086
i Didnt notice it before, but I think it looks like a kink aswell
looks like a 90 degree bend LOL.
cant you move that unsighly pump and res to the lower compartment?
its a kink for sure...
You can go from CPU to NB with less tubing than that to resolve that kink I would have thought?
I agree, in that sometimes shorter pieces equal less likely to kink.Quote:
Originally Posted by Mekrel
nope wrong that tubing sucks ass i think i will have to buy more 3603 but this time ill go with the one with thicker walls because when i used it before it never ever kinked and as far as the pump and res you cannot see the pump when i but up 5.25 cage and res was placed there for uv effect when i insert all 6 uv lights and really get things glowingQuote:
Originally Posted by phelan1777
This is looking very, very nice. My only problem with this build is the PSU - it's quiet while idle, but as soon as any load is placed on it it starts screaming like a freakin hair dryer. If silence is important to you, do yourself a favor and get a PSU with a bigger, lower rpm fan, because the PCP&C 'Silencer' 750W is ANYTHING but silent.
I also have a few questions regarding the case itself, because I'm in the process of planning out my cooling upgrade on my own TJ07. However, I can't disassemble my case yet, hence the following questions.
1: I seem to recall reading that it is possible to mount a single MCR320 as well as one HDD cage in the base of the TJ07, as long as the HDD cage is moved forward a bit. Can you confirm this?
2: Could I ask you to post a measurement from the top edge of the motherboard and motherboard tray to the inside top of the case?
3: Could I ask you to post a measurement from the top of the motherboard tray support bracket to the inside top of the case? (Refer to pic below).
http://i57.photobucket.com/albums/g2...cture010-1.jpg
On the top left, the bracket re-enforcing the motherboard tray.
Thanks for the help, and again, nice build!
i will get those measurements also to answer first question i do not know becuase i brought brackets for my hard drives which you can see in pics those allow easy installation into 5.25 spaces
PROJECT UPDATE**
CPU UPDATE
-Q6600(currently on ebay for $1 starting bid)
-I will be moving from quad to dual core E6850
WC UPDATE
-upgrade from thin wall tubing to thicker wall tubing 1/2ID 3/4OD
-will do a different g11 mixture i will do less coolant, more distilled water and also add petras blue uv dye to mix
CASE UPDATE
-will be cutting more holes on motherboard tray and case to hide cables better
Why would you want to go from a quad core, down to a dual core?
lower temps, less electric use,higher overclocks, and to tell the truth i dont do anything which uses all four coresQuote:
Originally Posted by Vice
One more question: do you like the black rubber edging that you're using to cover the edges of the holes? If you do like it, can you post a link to it?
http://www.petrastechshop.com/neruedtrmo.htmlQuote:
Originally Posted by NicePants42
sorry i have been such a fucin tease but i have finished the rig 90% i installed my t-line, got my q6600 g0, did some more mod work and am currently waitin for camera so tomorrow i will have pics of my new grrreat case
http://i187.photobucket.com/albums/x...cture004-3.jpg
http://i187.photobucket.com/albums/x...cture003-1.jpg
http://i187.photobucket.com/albums/x...cture001-3.jpg
p.s. i removed all elbow fittings which i used before and switched to thicker tubing