Asus P5K "Vanilla" vmods

Printable View

Show 100 post(s) from this thread on one page

06-28-2007, 12:48 AM
Achill3uS

Thank you NewBeetle-san :up:
First post updated with the correct vcore and vdroop mod.
06-28-2007, 12:50 AM
Achill3uS

Quote:

Originally Posted by ent

I did vdroop in the "kyosen way" and its working flawlessly, nut I used 50k (with 10-20k it should work OK also).

Sorry but I dont have a pic of the board, so I can only say that vmch mod is 6th leg of the IC wich is marked in Achillus photo to ground by 10k pot.

So whats your problem now? the vMCH mod didnt work for you? or you dont try'd it yet? I think its good marked, the same points like by the P5B, but anyway, I try it :)
06-28-2007, 10:46 AM
ent

Quote:

Originally Posted by Achill3uS

So whats your problem now? the vMCH mod didnt work for you? or you dont try'd it yet? I think its good marked, the same points like by the P5B, but anyway, I try it :)

Sorry, I didn't make it clear :(

I did the mod and its working but not in the way from your pic.

On your pic you marked 50k pot between 2nd and 7th pin of the APW Controller. It should be 50k(i recommend 10k) between 6th pin(FB) and 3rd leg (ground). Like the Vdimm mod.
06-28-2007, 01:02 PM
dnottis

Im assuming the vdroop mod can be penciled?
07-16-2007, 12:27 PM
Boogerlad

r these vmods compatible with the p5k-v? it's the same pcb, except for it using the g33 chipset. i want to do a pencil vdroop mod so baddly
08-04-2007, 03:55 PM
Chaos-PL

so... is there a confirmed vdroop mod for P5K ?
08-04-2007, 04:10 PM
Moonman

Anyone got OVP mod for P5K ?

Need more than 1.92V for our E6700. :D
08-08-2007, 05:00 AM
DEVIL K-ce

Quote:

Originally Posted by Chaos-PL

so... is there a confirmed vdroop mod for P5K ?

Pencil or VR to SMD and go clocking :)

http://img297.imageshack.us/img297/4809/vdroopri0.jpg
08-08-2007, 05:28 AM
Nosfer@tu

More pictures here :)
http://www.octeamdenmark.com/forums/...read.php?t=167

Quote:

Originally Posted by Moonman

Anyone got OVP mod for P5K ?

Need more than 1.92V for our E6700. :D

I dont know an OVP mod, but if there isent one, you migth be able to connect the 3.3 Volt line to the CPU and controll the volt with a resistor.

That was done on some of the AMD based motherboards a few years back!
08-08-2007, 08:18 AM
Eldonko

Thanks for posting, Ill do these mods!
08-08-2007, 05:27 PM
Chaos-PL

Quote:

Originally Posted by DEVIL K-ce

Pencil or VR to SMD and go clocking :)

http://img297.imageshack.us/img297/4809/vdroopri0.jpg

its working?
somebody wrote that its not working ...
you use it yourself? pencil or vr?
08-09-2007, 12:47 AM
Bail_w

1 Attachment(s)

Any confirmed Pencil Vdrop mod? Thanks

EDit: I did this pencil mod and it works prefectly.
08-09-2007, 04:27 AM
DEVIL K-ce

Quote:

Originally Posted by Chaos-PL

its working?
somebody wrote that its not working ...
you use it yourself? pencil or vr?

Yes working ok :D Set 1.55V in bios and get real 1.6V and no droop.

Martin
08-11-2007, 09:17 AM
funkflix

Anyone saved the missing screen for Vmch? I really need the reading point for it, better now then later.. :up: Thanks in advance! :)
08-11-2007, 09:45 AM
Learn

http://www.overclocking-jp.eu/public...6857rvddr2.jpg
08-11-2007, 10:06 AM
funkflix

Very fast, thanks a lot Learn! :toast:
08-13-2007, 04:41 PM
Chaos-PL

Quote:

Originally Posted by Learn

http://www.overclocking-jp.eu/public/vmods/100_6857rvddr2.jpg

this point makes things a lot easier ;]
08-14-2007, 07:08 AM
Learn

Quote:

Originally Posted by funkflix

Very fast, thanks a lot Learn! :toast:

No problem :toast:

Quote:

Originally Posted by Chaos-PL

this point makes things a lot easier ;]

After the inductor and capacitor.
08-14-2007, 08:44 AM
xt0m

Quote:

Originally Posted by Learn

No problem :toast:

After the inductor and capacitor.

Long time no see learn :D
Where have you been hiding :D
08-14-2007, 09:52 AM
Learn

Quote:

Originally Posted by xt0m

Long time no see learn :D
Where have you been hiding :D

:confused:
I do not post much :shrug:
/Sorry for the OT
08-15-2007, 02:06 AM
DEVIL K-ce

Vmch do nothing - 1.5V or 1.8V and the same FSB.

Martin
08-15-2007, 04:33 AM
Nosfer@tu

Quote:

Originally Posted by Learn

:confused:
I do not post much :shrug:
/Sorry for the OT

You should :D You have alot to bring to the game :D
08-15-2007, 10:53 PM
Achill3uS

Quote:

Originally Posted by DEVIL K-ce

Vmch do nothing - 1.5V or 1.8V and the same FSB.

Martin

On your pic you marked 50k pot between 2nd and 7th pin of the APW Controller. It should be 50k(i recommend 10k) between 6th pin(FB) and 3rd leg (ground). Like the Vdimm mod.

by ent (little upper) but thanks for the report, will be changed, still i dont have the mobo, so cant try it..
08-16-2007, 01:45 PM
865pe

this vdrop mod my P5KC work?
08-17-2007, 01:35 AM
podvarak

Quote:

Originally Posted by ent

On your pic you marked 50k pot between 2nd and 7th pin of the APW Controller. It should be 50k(i recommend 10k) between 6th pin(FB) and 3rd leg (ground). Like the Vdimm mod.

Just to confirm that this version is working ok
:wave:

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 09:42 AM.

XtremeSystems