Unit looks very clean, good work :)
Printable View
Unit looks very clean, good work :)
Today I've done :
http://www.members.lycos.co.uk/piotres2/kumkum/11.jpg
Evacuation
http://www.members.lycos.co.uk/piotres2/kumkum/12.jpg
http://www.members.lycos.co.uk/piotres2/kumkum/13.jpg
Electric
http://www.members.lycos.co.uk/piotres2/kumkum/14.jpg
http://www.members.lycos.co.uk/piotres2/kumkum/15.jpg
http://www.members.lycos.co.uk/piotres2/kumkum/16.jpg
And later unit made devil's number hehe :devil: . I've tryied pure R410a and I've found that blend with R507 is much better ..with pure R410a hiside with 225W load goes up to 19 bara, -54*C evap - but that was with no insulated SLHX (23*C ambient) and later I've swap it for R507&410a blend (around 90%/10%) ..hiside max 15 bara and -57*C@225W :) .
http://www.members.lycos.co.uk/piotres2/kumkum/17.jpg
Final charge, no load :cool: .
http://www.members.lycos.co.uk/piotres2/kumkum/18.jpg
225W loaded = -57*C evaporator :D .
http://www.members.lycos.co.uk/piotres2/kumkum/19.jpg
Tomorrow I plan to test unit on E6600ES and later pack it :yepp: .
Regards
Peter
Very nice, powerful.
Nice work piotres, some good temps from that S/S mate.
Don't let us wait so long for e6600 benches :)
That's a nice benching unit.
Still way overpowered i think.
just think of it this way, if he wants to later, he will have plenty of power to convert the unit to an auto cascade without having to buy a new compressor:p:Quote:
Originally Posted by _HL4E_HalfLife_
Nice job again Piotres :)
KumKum will be very happy to have it for bench \o/
Nice job Piotres! That's a nice load temperature, probably about the same as dry-ice in a similar load scenario.
Hi
Last part of work from me :D :
http://www.members.lycos.co.uk/piotres2/kumkum/20.jpg
http://www.members.lycos.co.uk/piotres2/kumkum/21.jpg
100% finished :) .
http://www.members.lycos.co.uk/piotres2/kumkum/22.jpg
Evap temp just before turn PC on ...
http://www.members.lycos.co.uk/piotres2/kumkum/23.jpg
E6600ES @ 3.9Ghz/1.6V idle. Damn mine unmoded Asus P5N-E SLI don't want to run much over over 430 FSB :shakes: . That's why so low clock , and vcore without vmod is poor too :yepp: . Sorry guys for that :shakes: .
http://www.members.lycos.co.uk/piotres2/kumkum/24.jpg
Same in stress during SuperPi ...as You can see 0.5*C diffence, I think it show power of that "little" compressor :up: .
http://www.members.lycos.co.uk/piotres2/kumkum/25.jpg
http://www.members.lycos.co.uk/piotres2/kumkum/26.jpg
http://www.members.lycos.co.uk/piotres2/kumkum/27.jpg
Ready to go ... :)
Best Regards
Peter
Job well done.