ATTN: All Silverstone TJ07 owners

Printable View

Show 100 post(s) from this thread on one page

05-15-2007, 01:00 PM
Sideroxylon

Quote:

Originally Posted by Grinch

so you have your pump running to the gpu before the cpu? would'nt you have better temps if you hit cpu before gpu?

Probably doesn't make much of a difference. Temps only vary a few degrees throughout the loop.
05-15-2007, 01:03 PM
Grinch

I cant tell if it goes pump..rad..gpu
or
pump..gpu..cpu

would'nt it be better to at least hit his res 1st?
05-15-2007, 10:41 PM
welshtom

Quote:

Originally Posted by pie_uk

@welshtom i admire you're rad in the top there. could you explain how you did it and what modding it envolved? i would love to add a second rad to mine. cheers pie

Hi,

Basically, I cut the mesh right down to the bare necessary (although when I look back i dont think you need to).

Just put the fans you want to use in the Mesh bracket up the top, then use the bolts that come with the rad (Stealth GT) to screw down through the top of the mesh, through the fans and into the rad. Its nicer to get some smart socket cap bolts rather than the ugly ones that come with the rad.

thats it really

Tom
05-16-2007, 05:49 AM
Pinmod

man this thread is like doolgasm
05-16-2007, 03:55 PM
pie_uk

Quote:

Originally Posted by Grinch

I cant tell if it goes pump..rad..gpu
or
pump..gpu..cpu

wouldn't it be better to at least hit his res 1st?

the laws of thermal dynamics suggest it wont matter, since the water temperature will hit a certain "point" anyway, in a closed loop it wont matter what order you do the loop, just as long as the pump is before the res. i have also kept the length of the tubing as short as possible to keep efficiency
05-16-2007, 11:16 PM
Grinch

Quote:

Originally Posted by pie_uk

the laws of thermal dynamics suggest it wont matter, since the water temperature will hit a certain "point" anyway, in a closed loop it wont matter what order you do the loop, just as long as the pump is before the res. i have also kept the length of the tubing as short as possible to keep efficiency

very true...still very nice looking rig...:toast:
05-17-2007, 02:28 AM
RockfordFosgate

Update Time::D

Scythe Kama Meter

Scythe Kama Bay

http://img525.imageshack.us/img525/6...0071096nu0.jpg

http://img511.imageshack.us/img511/6...0071098fh6.jpg
05-17-2007, 07:12 AM
masaville

Looks great! Does that Scythe Kama meter control 4 fans?

I have that same Zalman controller, but I spraypainted the back of it black and now it looks like a black faceplate. You can't even see the blue tint anymore. Was going for an all black look. =)
05-17-2007, 07:35 AM
RockfordFosgate

Yes Kama Meter control 4 fans+4 temp sensor :)

Nice idea Zalman looks great in black :D
05-17-2007, 10:24 AM
pie_uk

i do wish i got the tj07 with the see through side panel. cant buy it on its own ?
05-17-2007, 03:53 PM
Sideroxylon

Quote:

Originally Posted by pie_uk

i do wish i got the tj07 with the see through side panel. cant buy it on its own ?

The TJ07 side panels are custom made for each individual case. So, no you can't get side panels by themselves. At least that's what Silverstone told me.
05-17-2007, 06:04 PM
OCme

Quote:

Originally Posted by pie_uk

i do wish i got the tj07 with the see through side panel. cant buy it on its own ?

I don't see what the big deal is... I remember when no computer cases had side panels & we would mod em and make our own. ;)
05-19-2007, 06:09 AM
pie_uk

@rockford, how does your loop flow?

and what south cooler are you using? cheers bud

@welshtom

http://i116.photobucket.com/albums/o...ntitled-15.jpg

you see my red circle, there is a joint like that at the top on the same side, did you have to cut this off? otherwise how would you fit the dual rad in therE>?
05-20-2007, 05:52 PM
Alastor2262

Quote:

Originally Posted by pie_uk

@rockford, how does your loop flow?

and what south cooler are you using? cheers bud

he is using this one :
http://www.noctua.at/main.php?show=p...s_id=7&lng=eng
06-10-2007, 05:21 AM
RockfordFosgate

Another update Apogee GTX+XSPC 5.25 Reservoir:)

http://img404.imageshack.us/img404/7766/a6gn2.jpg
06-10-2007, 12:57 PM
pie_uk

^^ nice what gfx card have you got? how did you manage to get 18k in 3d05 with an x1950xt

what made you change res?
06-10-2007, 01:12 PM
RockfordFosgate

Day use 1900gt Rev2

@Benchs Sapphire X1950Pro Dual Godfather:cool:

http://img113.imageshack.us/img113/3...0071335ga7.jpg

http://img505.imageshack.us/img505/7...0071329kq9.jpg

Old res is aluminium:shrug: This one is plexy;)
06-10-2007, 01:16 PM
pie_uk

dual god father lol where can i buy that !!

oh and you are using primo flex, how does that compare to tygon?

also are you going to fit that maze or?

does that card have 2 cores?

sorry for all the questions
06-10-2007, 01:21 PM
RockfordFosgate

I buyed another Maze4 for second gpu i waiting this:D

Primoflex is very flexible and I think better than tygon:)

Yes 2 X1950Pro Core 512x2=1024mb GDDR3 36+36=72 pixel pipelines:)
06-10-2007, 01:22 PM
RockfordFosgate

Red One is 1900gt Rev2 :D:D:D Blue one Godfather

http://img152.imageshack.us/img152/5...0071314wk7.jpg
06-10-2007, 01:25 PM
eXceeded

Quote:

Originally Posted by RockfordFosgate

Red One is 1900gt Rev2 :D:D:D Blue one Godfather

http://img152.imageshack.us/img152/5...0071314wk7.jpg

ooh I didn't know they were actually available yet.. nice :D
06-10-2007, 01:29 PM
pie_uk

yeah looks so nice, would love one !! where can i but it lol

also 2x maze on that would be :eek:
06-10-2007, 01:32 PM
RockfordFosgate

I think tomorrow second Maze4 came :)
06-10-2007, 01:34 PM
Anemone

Well on this note, if one of you in the US has one of the drive cages from the lower portion of the TJ07 leftover I could use one. Drop a PM and we can straighten out the details.

:)
Ty
06-10-2007, 01:38 PM
pie_uk

I think some one here did a comparison of different tubing..? can some one link me to it! lost it

Show 100 post(s) from this thread on one page