Damn those are some nice results. Ordered a pair myself after seeing this... always wanted those LED tracers :D
Printable View
Damn those are some nice results. Ordered a pair myself after seeing this... always wanted those LED tracers :D
Tempted to grab some of this ram but guys with P5B Deluxe board how high can they go super pi 32M with such tight sub timings
i.e. P5B Deluxe
irev210, would the crucial 8000 handle such tight timings better than these 8500s ?Quote:
DDRAM CAS# Latency: 4
DRAM RAS# to CAS# Delay: 4
DRAM RAS# Precharge: 4
DRAM RAS# Activate to Precharge: 4
DRAM Write Recovery Time: 3 or 4
DRAM TRFC: 20 to 30
DRAM TRRD: 3
Rank Write to Read Delay: 9 to 10
Read to Precharge Delay: 5 to 9
Write to Precharge Delay: 9 to 10
looking to hit the 600mhz mark with such timings :D
The 8500 should do better than the 8000's now as they have replaced them as Crucial's highest bin.
However, one thing I should mention is that from my own experience with two sets of PC8000 Ballistix on my P5B, I could not run timings as tight as I could on my Cellshock's or my OCZ sticks. Probably just the sticks I had being picky, but I figured I'd mention it. irev would know best though as he's had more sets of Ballistix than there are members on this board. :p:
Yeh I know what you mean, I used my socketA Danger Den maze 4 block on my socket 754 and 939 amd now I have it on my 775 core2 duo board. That block has been with me for 6 years, each time I find a way to mod it to the new board.Quote:
Originally Posted by ozzimark
for the p5b dlx, i run 4-4-4-5-4-35-3-10-4-12Quote:
Originally Posted by eva2000
I think i killed my commando the other day, having issues with it... delaying benchmarks
not to give too much away, but i can do over 600MHz 1M pi stable w/ 2.45 :)
probably dual 32m pi stable at 600ish
very very nice. i'm not sure if i can do that, unless 4-4-4 ends up clocking a bit better than 4-4-3 :DQuote:
Originally Posted by irev210
Remember he's talking Intel and your talking AMD with a Sempron right?Quote:
Originally Posted by ozzimark
4000+ now, but yeah. and i just gained like 40mhz by switching to trp 4. very curious :fact:Quote:
Originally Posted by EnJoY
i'll start posting screens once things get "interesting" by gautam's standards :D :buddies:
very nice,is there any shops selling this to ship internationally?
i want some of these bad boys:slobber:
also are the 6400 kits clocking well too?
I told ya the 8500 Ballistix are the best sticks out! They are binned for 1.8ns, vs 2.0ns on the 8000's.
updated the first post with some shots at 4-4-4 :toast:
and technically it's 1.876ns, but close enough :D :D :D
:eek: VERY impressive!!!Quote:
Originally Posted by ozzimark
my commando seems to be back to life i think.
im testing 1.8V @ 1000MHz w/ 5-5-5-15 timings heheh
well hopefully the commando makes a revival... looking forward to your 4-4-4-x results :)Quote:
Originally Posted by irev210
on P5B Deluxe 4-4-4 is faster than 4-4-3 or 4-3-3 hence why i asked :)Quote:
Originally Posted by ozzimark
for AM2, it seems to depend on the bench being run. Some things, 4-4-3 is faster, some things 4-4-4 is faster. 4-4-4 is faster all around with 1T last time I checked.Quote:
Originally Posted by eva2000
Quote:
Originally Posted by Raging
My 6400 is clocking well, have only had it a couple of days, so far I'm at 600Mhz 5,4,4,12. And the best thing is that it was realy cheap.
sweet mate:cool:Quote:
Originally Posted by DFI pit bull
i will be picking up a set soon:toast:
Raging.
You could order them directly from Crucial UK, but they are expensiveQuote:
Originally Posted by Raging
http://www.crucial.com/eu/store/part...KIT12864AL1065
I am getting a pair aswell, but it seems like I need a new board to max them out ;)
My P5W doesnt like to run ram higher than 540Mhz.
are these the newer 8500 ballistix that uses a lower volt chip or something or it is just purely diff with a 1.8ns binned? :)
yea thats why i asked about any shops that sell them to ship internationally;)Quote:
Originally Posted by Fr3ak
i think i will just go with a 6400 kit,they seem to perform just as well:)
https://www.priceguidenetwork.com/home.php sell them for a very nice price and do ship world wide ,, for a group order (say 5 kits) shipping will be about 10$ per kitsQuote:
Originally Posted by Fr3ak
Xeon 3040
P5B Deluxe
2Gb PC2-8500 Ballistix
Hiper Type-R 580w
Vdimm : 2.45v
http://daftou59.free.fr/Screen/Cruci..._676_2.45v.png
:slobber: how does it do at CAS 4?
Only 580Mhz @ 2.45v :(Quote:
Originally Posted by Gautam
nice Quentin, very nice :D
i wish my system could go that high and stay stable :(
Holy crap, 676MHz! That's awesome! My memory controller would explode before it even gets close to that. :explode: