Printable View
guys my board wont even post. I get fans and mobo lights then after 30 seconds I get 1 long beeeeeeep. Using titanium alpha 8000 4-4-4-15 2x1gb and I have some corsair 5400 ul 2x512. both wont post. I tried swapping the dimms to the black slots and no go. I'm so frustrated! Is anyone successfully using d9 with this board?
before i flash with this bios, can u give me more info on it, is this the one u edited to get more voltage options and is their a possibilty it will kill my boardQuote:
Originally Posted by couppi
Trans Am, i know this sound simply but reset cmos, i know that aint pro advice but i am nooby
Quote:
Originally Posted by RickyG512
yes did that. I am also using a xeon 3060 in this board. could that be the issue?
File seems to be ok, thx ;)
did u flash with this file, is everything ok with it, have u got extra voltage options now ?Quote:
Originally Posted by wittekakker
well did it work before ? overclock and now fail ? i think to reset cmos u go to unplug power and slide jumper over for atleast 10 seconds and doesnt always work first time with me so u got to repeat process of moving jumper again and then back to clear for 10 secs and back to normal againQuote:
Originally Posted by trans am
Jup's got extra's, ran through all my tests for now too.
Didn't check overclock.
Brand new board. NEW INSTALL.Quote:
Originally Posted by RickyG512
I tested the xeon in p5b dlx and it worked fine. all the ram has been tested as well. that leaves the board.
PS> Been on hold for abit tech support for 2 hrs now. If I hear this Earth Wind and Fire song one more time I'm going to kill myself! I think I'm sending the board back to newegg today..
sorry for my bad english but do u mean by that line from "jup's" as in yes and there are extra voltage options and it didnt kill your board ?Quote:
Originally Posted by wittekakker
trans am - so this board hasnt work for u yet, i thought u ment it used to work, does it support da cpu, check abit website
lol yes, that's what i ment. Just flash that BIOS file, you'll see it for yourself :)
modded bios date: 26/01/2007
The modded BIOS is giving error when trying to get my system running in SLI mode. Went back to normal bios
One looong beep usually means memory error. You might need a stick of ram rated for 1.8v to get into the BIOS and raise the voltage. I know I did.
Huh. I wonder why...Quote:
Originally Posted by wittekakker
yea i had same prob but i didnt have different ram, so i used 1 stick and it worked so i up voltage and put in 2nd stick, then when i reset cmos one time, this idea didnt work and had to remove all sticks and then put it 1 and then it posted
some questions
- my chipset temp is like 52 degrees when dual orthos load when at 425x8 3.4 ghz, is 52 to high
-- also how do i flash without floppy, cant seem to boot from USB flash like i could in my P5B and Lanparty NF4 Ultra-D, i could actually choose first boot device:imation 1GB flash but i cant do this in this bios, is there another way if u dont have floppy
-- is 1.52v to much voltage for E6600 @ 3.4ghz 64 degress C load:
1.55 bios
1.52 idle
1.51 load so 0.1vdrop i think
-
Hey couppi thanks for the modded bios. Unfortunately playing with the extra voltages hasn't improved my overclocked any. Still stuck around 430 fsb with a 6300.Quote:
Originally Posted by couppi
Cheers anyway
FlashMenu.Quote:
Originally Posted by RickyG512
also there is a generic sticky on the abit-USA forum about how to flash from a USB device - probably will work for the FP-IN9 too.
hey dats not fair lol, 2 posts from my post and still no one answered my questions
also flashmenu ?, wat is dat, i searched bios and couldnt find that option
offcourse, because it is software for windows :)
Didn't you look what came with your box lol?
i never use CD's dat comes with anything, i always go straight to da website and get latest drivers
ok i just flashed
also found some more new options like:
cpu spread spectrum: disabled
sata spread spectrum: disabled
for the mcp51 voltage i goes from 1.5 to 1.9, ive set mine at 1.7, will try orthos again now, will post back in 15 mins
and pleeeeease some one help me with these questions:
1. my chipset temp is like 52 degrees when dual orthos load when at 425x8 3.4 ghz, is 52 to high
2. is 1.52v to much voltage for E6600 @ 3.4ghz 64 degress C load:
1.55 bios
1.52 idle
1.51 load so 0.1vdrop i think
temp is ok
ps: don't panic that quick, this is XS :)
max fsb my system is booting is 24/7 stable :) .. 385 ... tips&tricks?
to get higher than 385 increase nb and cpu vvt voltage and change ldt to 4x
coming soon:
Release BIOS M524B_11.BIN:
1. Fixing boot hang POST code 50h and 6dh.
2. Fixing Command Rate abnormal by Manual
3. Fixing the SoftMenu String
4. Fixing the Memory Timing Setting
5. Fixing the OnChip Audio/LAN select
also supposedly beta 12 next week
Yippi Yee!!
HyperTransport (HT), formerly known as Lightning Data Transport (LDT), is a bidirectional serial/parallel high-bandwidth, low-latency point to point link
LDT=Hyper Transport :) didn't know intel board have such thing :P
until they go on the abit ftp
http://www.ikarigendo.de/fpin9sli/M624B_11.BIN
http://www.ikarigendo.de/fpin9sli/M624B_12.B01
Beta BIOS M624B_12.B01:
1. Added wake up by PCIe Item
2. Fixing the CPU Temperature hang at 77℃
3. Modify Halt On item
4. Fixing warning Beep to restart system when CPU support PECI
5. Modify C1E Item Default to Enabled.
looking at the description of the fixes, none of them seem to help with overclocking but i havent tried yet, wat do u guys think
can we also get a modded bios for extra voltage options for bios number 12 please
is there a reason why bios 12 file names does not end it .BIN
update ok just flashed number 12
first impressions- it sucks, my current overclock of 3.4ghz doesnt work any more at all, it wont even post had to reset cmos,
new memory timings option called tRFC and can be set between 1-255, on auto it is set at 26
also in bios it says the bios version is 00, it should say 12, stock bios said 10
i have found the modded bios by couppi the best so far, but the link isnt working anymore, couppi how i can i get the bios now, can u upload it onto and sharing website please, i dont know if theres any point in u modded bios 12 iswell as i cant post with that one with my overclock like u can with stock and modded 10 bios
bump bump bump