Abit Quad GT FSB 543 with E6300: Update FSB 553 1:1 Sync

Printable View

Show 100 post(s) from this thread on one page

03-15-2007, 05:12 PM
Misko

Quote:

Originally Posted by Norz

....lol... I try for you my friend:D , but its tricky, only got this mobo for two days, no mods yet. When i can manage 550fsb on this Abit, its LN2 action.
There is a few vmods i have to do first, boot to win on 500fsb, then uguru up from there. Cooling is the key here, and lots of volt of course. Thik i need 2.0+vmch for higher fsb (550fsb+)

EDIT: Pic of spi32M@530fsb, 535 was no go. Will try later.

---cheers---

10x my friend :clap: very good result, I see yours xeon is also very good ;) hope to see u soon on ln2 :)

:toast:
03-15-2007, 06:11 PM
LexLuther

Quote:

Originally Posted by Dekara

Hoho that's great result :clap:, congrats !!!

Give us vcore, vmch and cooling type(still water?).

:toast:

vCore is up to just CPU. I had knew that GT need some more voltage because the 1066 strap give more Load than 1333 strap.

but it's not.

My vcore is 1.425v on 3.7. and 1.495v on FSB 553

vMCH is always 1.7v.

under vMch 1.7v, Could not start to XP. Cooling is also WaterChiller. temp -2 cellcious.
03-15-2007, 06:17 PM
LexLuther

Quote:

Originally Posted by Norz

....lol... I try for you my friend:D , but its tricky, only got this mobo for two days, no mods yet. When i can manage 550fsb on this Abit, its LN2 action.
There is a few vmods i have to do first, boot to win on 500fsb, then uguru up from there. Cooling is the key here, and lots of volt of course. Thik i need 2.0+vmch for higher fsb (550fsb+)

EDIT: Pic of spi32M@530fsb, 535 was no go. Will try later.

---cheers---

Though it is hard to belive and apply this, it is useless to be suspicious.

and though somebody do not believe this, but I'm Ok.

just only the time after My Mobo had been working like this.

;) Be positive sir.
03-15-2007, 06:24 PM
littleBoy

Great job!! Lex.
Go Go a higher fsb!!!
I want to see a sub-ramtiming.
03-15-2007, 06:27 PM
LexLuther

Quote:

Originally Posted by Kunaak

Threads Merged.

no need to post every single incremental OC you do.
its nice and all, but no need to post every increment OC you do, with a whole new post.

Thank you very much for advice. ^^ very helpful.

and the process is right.:)
03-15-2007, 06:36 PM
LexLuther

Quote:

Originally Posted by Burn

Guy(s), what voltages are you using to hit 540fsb? I have the same board and am wondering what settings to use. A list of all voltages would be greatly appreciated. Also, which BIOS you are using would be helpful :D

on FSB 553,

vcore : 1.495v
vdimm : 2.625v
vFsb : 1.5v
vmch : 1.7v
vICH : 1.2v
vICHIO : 1.7v actually everything is max value except vcore and vdimm.

and nothing moded.

ram timing is 4-4-4-12 trfc 30 and the others is basis on Mobo default.

No memset useing. just posting windows. Chiller setted to -2 cellcious.

and I ran Super pi on FSB 529, eventhough higher FSB is possible. for compare my older pi record on P5BD at same setting.

that's all.

and I added My Mobo Pic.

http://www.nowpug.com/bbs/data/pc_sys/070316_0002.jpg
you can see CPU, North Bridge & Heatsink and active cooling for Digital PWM.

http://www.nowpug.com/bbs/data/pc_sys/070316_0003.jpg
and you can see also North Bridge & South Bridge included My Cute X600 with VF-900 Cu.

http://www.nowpug.com/bbs/data2/pc_sys/070316_0004.jpg
finally, this is my WaterChiller contained Koolance Coolant and Hydo 40W inline/underwater Pump.
03-15-2007, 06:49 PM
dinos22

is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB

what about RAM dividers how do they function

how high can you clock the RAM

nice boards
03-15-2007, 06:51 PM
ziddey

dinos, it's 1066 strap. no 1333 on abit qgt currently :)
03-15-2007, 06:55 PM
LexLuther

Quote:

Originally Posted by dinos22

is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB

what about RAM dividers how do they function

how high can you clock the RAM

nice boards

QUAD GT is working only 533/800/1066 straps.

but there is "by CPU", too.

If the Cpu based onFSB1333 be retailed, or mod something Default FSB of CPU, then it maybe work on 1333Strap. but nobody knows that, yet.
03-15-2007, 06:55 PM
LexLuther

Quote:

Originally Posted by ziddey

dinos, it's 1066 strap. no 1333 on abit qgt currently :)

thank a lot Ziddey ;)
03-15-2007, 07:04 PM
LexLuther

Quote:

Originally Posted by dinos22

is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB

what about RAM dividers how do they function

how high can you clock the RAM

nice boards

memory frequency divider is 1 by 1. just Sync.

th memory frequency is 1106 on DDR2. right? yes.
03-17-2007, 10:26 AM
LexLuther

http://www.nowpug.com/bbs/data/pc_cp.../540QuadGT.jpg

Super PI shot added on FSB 540 with E6300.

I Hope that Faster than Coolarer's with Infinity P965 :bounce:
03-17-2007, 10:39 AM
nikolas61

congtats

nice FSB

:clap:
03-17-2007, 12:05 PM
Misko

Awesome FSB :toast:

Temperatures on CPU&Nb are still -2C, and vmch also still 1.7V?
03-17-2007, 01:43 PM
LexLuther

Quote:

Originally Posted by Misko

Awesome FSB :toast:

Temperatures on CPU&Nb are still -2C, and vmch also still 1.7V?

yes :) on that setting this is very stable.

it does need max vMCH on 1066 strap high FSB.

I'm setting up windows server 2003 for advanced Pi value now :rolleyes:
03-18-2007, 03:29 AM
Misko

10x for info :toast: , what do u think about max fsb for 32M run? Can u lower multi (if u can not change multi in BIOS with yours CPU, u can change it in win with crystalCPUID) on CPU and try 545, if it can't pass with default one? It would be very interesting info for me
03-18-2007, 03:46 AM
dinos22

how high can you OC the RAM on 4:5 and 2:3 ratios with CAS4 and CAS5
03-18-2007, 05:40 AM
LexLuther

http://www.nowpug.com/bbs/data/pc_cpu/540nn.jpg

Now I added FSB 540 with E6300 renewal.

memset info and CPUZ memory info has been evaporated. I don't know. ^^;

so I tell you, 4-4-4-3-5 3-23-2-10-9-2-8-4 on memset.

almost near to coolarer's Infinity 965P.

but now My OS is still XP SP2, so I have tuned something.

If I have some stable condition on SERVER2003, then I'll let you see better result. thankyou.

and I have no 6400 or 6600 C2D, so I can't let you know 2:3 or 4:5 setting on High Clock,

If you want to know 2:3 or 4:5 result on Low Clocks, then I'll show you that.

have a nice day. buddies. :bounce:
03-18-2007, 01:39 PM
ziddey

uncheck lock mchbar and see if it helps. you'd need to do that first time around though before it vanishes.
03-18-2007, 05:09 PM
Vapor

I'm liking this board more and more....but I'm with Dinos: how well does it clock memory on 4:5 and 2:3 for you (cas 4, mostly)?

Also, how well does the 800 strap clock for you?
03-18-2007, 06:57 PM
LexLuther

Quote:

Originally Posted by ziddey

uncheck lock mchbar and see if it helps. you'd need to do that first time around though before it vanishes.

Thank you Ziddey ^^ very helpful I'l' try to do it on next time.
thanks again~
03-18-2007, 06:59 PM
LexLuther

Quote:

Originally Posted by Vapor

I'm liking this board more and more....but I'm with Dinos: how well does it clock memory on 4:5 and 2:3 for you (cas 4, mostly)?

Also, how well does the 800 strap clock for you?

My Memory is not so good now...
so I want to test for you say, too.
but I'm not ready to do it.
I'm searching what is the nice memory.
sooner I try to do it you said. thank you for your concern.
03-18-2007, 07:35 PM
dinos22

Quote:

Originally Posted by LexLuther

My Memory is not so good now...
so I want to test for you say, too.
but I'm not ready to do it.
I'm searching what is the nice memory.
sooner I try to do it you said. thank you for your concern.

that is not important

what is important is that 4:5 and 2:3 clock the RAM similar.............since you have done 540MHz with RAM with decent timings you should be able to do those clocks and better with those ratios

reason i ask for CAS5 as well is to see whether the board can manage really high MHz but if your RAM isn't capable it doesn't matter

i found out that the RAM subtimings on this board are not available through bios which is a real shame :slapass: >>> knowing Abit it will take a long time if ever for them to listen to end users and introduce things like that in the bios :(
03-18-2007, 07:37 PM
Gautam

Quote:

Originally Posted by dinos22

t
i found out that the RAM subtimings on this board are not available through bios which is a real shame :slapass: >>> knowing Abit it will take a long time if ever for them to listen to end users and introduce things like that in the bios :(

Virtually its only shortcoming. :-/
03-18-2007, 07:40 PM
dinos22

Quote:

Originally Posted by Gautam

Virtually its only shortcoming. :-/

not sure i understand the message here :confused:

Show 100 post(s) from this thread on one page