Brisbane 4000+ box shot and CPU IHS shot.

nice m8 :)

any particular reason for the half multi?

Quote:

---

Originally Posted by SOLDNER-MOFO64

nice m8 :)

any particular reason for the half multi?

---

10.5 was max I could choose. :p: and 10x kept giving me blue screens.
I hope to get dual channel ram next week or so for the rig.

Good work alucasa :toast:

Nice CPU you got there :) After all this OCing try to go down to 1.0V and find max stable frequency ;)

:clap: :clap:

Is that much Vcore absolutely necessary? You may be better off with a 90nm CPU then :p:

http://img329.imageshack.us/img329/8521/cpu3111jz1.jpg

Quote:

---

Originally Posted by s7e9h3n

Is that much Vcore absolutely necessary? You may be better off with a 90nm CPU then :p:

---

Yes, I am probably better off 90nm or even 130nm.

Or - even 1 µm?

Quote:

---

Originally Posted by s7e9h3n

Is that much Vcore absolutely necessary? You may be better off with a 90nm CPU then :p:

---

Maybe you should get a socket939 then :D

http://img76.imageshack.us/img76/129...128vfj8.th.jpg
http://img485.imageshack.us/img485/5...264vum2.th.jpg

Did lowering the HTT and ram mhz have any positive impact on the OC?

Quote:

---

Originally Posted by alucasa

This was done on stock cooler. Silverstone heatsink couldn't fit in the 2U.

http://valid.x86-secret.com/show_oc?id=165626

It's the stable one.

http://img251.imageshack.us/img251/9...isbane3na1.jpg

http://img251.imageshack.us/img251/3...isbane4vw1.jpg

---

Does it really need that much voltage to get a stable 2.88ghz? I thought the 65nm chips can hit 3ghz on relatively low voltage. But anyways, nice work.

Quote:

---

Originally Posted by awdrifter

Does it really need that much voltage to get a stable 2.88ghz? I thought the 65nm chips can hit 3ghz on relatively low voltage. But anyways, nice work.

---

I didn't need to. For some reason, I upped vcore too much. 1.4vcore was probably more than enough.

One thing I noticed with my 3600 Brisbane is its ability to handle voltage. Seems to scale much better with the volts than Windsor does. My 3800 Windsor will do 2.8ghz with 1.5v but nothing more, and going to 1.5v over stock only netted me roughly 75 to 100 mhz.

But Brisbane scales pretty well. Up the volts and up your clock.

Also Alucasa you're right about Brisbane running cool. Even when I was torturing it at 1.675v it ran much cooler than my Windsor...


Ply

Quote:

---

Originally Posted by alucasa

Very unstable at this point.

But here.

http://img158.imageshack.us/img158/696/brisbane2kv6.jpg

---

http://www.ripping.org/database.php?cpuid=543 ;)