I've got an Iwill BD-133u (i815) & 1x256MB Hynix PC-133@2-2-2-5/7Quote:
Originally Posted by sparkY1000
The board is good enough but my cpu is average.
Tweaks...yeap...i've thrown everything i know,so i can match-up your cpu speed.
Printable View
I've got an Iwill BD-133u (i815) & 1x256MB Hynix PC-133@2-2-2-5/7Quote:
Originally Posted by sparkY1000
The board is good enough but my cpu is average.
Tweaks...yeap...i've thrown everything i know,so i can match-up your cpu speed.
I will see if I can do better this weekend :D
Quick update:
Havn't had time to do some superpi yet but tried a few things so I could get higher FSB and here is the result :D
http://valid.x86-secret.com/show_oc.php?id=167473
Still on stock volts and air cooling! I did try bumping the FSB upto 166.7MHz (CPU@1833.7MHz) and it worked for about 10 seconds before it restarted
Oldskool, i like :woot:
man i gotta dig out my pics of my old celly 566 at 100% overclock on air. Albit it only got into the boot screen and posted the memory then it froze:cool:
Whats up TASOS, I remember the golden days of the tualatin with you, ol' man, and a couple others up in ocforums.Quote:
Originally Posted by TASOS
Am I a bad person for letting my 1.1a that did 1670 on an SK6+ and a Vx133u stagnate with my parents where it isn't even being used?
I think other than the ST6 and that Gigabyte board with the really long name, us Iwill users had some of the best overclocking Tually boards out there.
I almost managed to get the superpi 1m back a few days ago but the system rebooted just as I was saving the screen dump :( Hoping another cold night will give me the extra stability needed to save it.
i don't know if you can push it further, my p3 celeron 1.4ghz olso stopped at 1.75ghz. but with stock cooling and a :banana::banana::banana::banana:ty mobo.
This chip has alot more in it yet! It just needs a decent motherboard and RAM or some extreme mods! :D
IT NEEDS 2ghz lawls
The good old days,with the Tualatins....i remember you.Quote:
Originally Posted by funnyperson1
Yeah that Gigabyte board ...the only one with 1/5 divider.
GA-6OXET was the name iirc, but the Soyo SY-TISU wasn't that bad either.
found some old screenshots of my tualatin tests. :D
1. Tualatin Celeron 1.0A@1.5 on TUSL2-C click
2. Tualatin Celeron 1.3@1.73 on Asus P3V4X with modded Slot Adapter click
nothing left except those screens and the p3v4x which is pretty much wasted with just one memory slot left that works. :slapass:
Ah the old Tually Celeron. I gotta pick up my ST6 from my friend and replace the bulging caps on it. Maybe do a voltmod on the Northbridge and RAM.
ur fsb is holding you back man you need like 160+ get some pc150!!
sparky1000 how you make your ram to run at 166mhz.I cant set more than 133 from the bios and i cant set a voltage.Please help me couse i am going to brake the WR for Intel Celeron Tualatin 1200 which is 1971mhz and i am most going to 1911 and againt fell down :(
EDIT: btw did you lock your agp/pci lock ? I have jumpers on my mainboard and set it to max 33.3 and when i want reach higher mhz with more PCI/AGP mhz my computer reboot ;(
My board has no options in the BIOS for overclocking so I have to do everything in windows using CPUFSB, I cannot lock the PCI/AGP bus either so at 160MHz FSB the PCI clock is running at 40MHz, my graphics doesnt seem to mind but I think my hard drive might.
My RAM absolutely stinks it can just do 140~145MHz @2-2-2-5 in a few weeks time I will be using some RAM capable of 160MHz+ @2-2-2-5 and higher @3-3-3-5 so I should take the pi record back :)
Also going to try and get past 2GHz for the CPU ;)
I think to turn off the PCI/AGP Lock from jumpers to make it....strange thing it is.SOmetimes it work with agp/pci lock sometimes not :( GRRRRR :slapass:
What graphics are you using? Nvidia cards handle high AGP frequencies better than ATi, I use a G4 MX440SE Its not a great card but doesnt mind AGP in the 80MHz region :)
congratulations for another lucky tualatin!!!!:toast:
Thanks stalker170! :)
I am hoping to beat your 2121MHz soon with this chip, I have got some crazy things lined up ;)
Do you happen to know if yours is the fastest Tualatin core ever? I cant see anything higher on www.ripping.org or www.hwbot.org but I would like to know what kind of region I need to be aiming at :D
Also going to have a crack at the fastest spi1m with a PIII class chip :banana:
My GB ATi 9250 fails me ... :(
If you have an AGP Nvidia card to hand give it a go you might find it gives you a some extra MHz :)
What FSB have you got to so far?? The highest I have managed was 160MHz (AGP@80MHz) but not exactly stable I need to track down what was limiting me.
If you are going for high fsb, you really really want to get an 815 board with onboard graphics. My highest was 185 fsb, with the 4:3 ram ratio. (138mhz ram, 92mhz agp)
For tualatin, i suggest the asus TUSL2 (not TUSL2-C, since that lacks onboard graphics)
http://i30.photobucket.com/albums/c3...p3667at925.jpg
Going to a friends house in a couple of weeks for some experiments! So the brilliance of our plan will be unveiled in a few weeks ;)
thats the spirit :D :toast:Quote:
Originally Posted by sparkY1000