Super results :toast: are these F's also made in malay? How is the IHS quality any improvement?
Printable View
Super results :toast: are these F's also made in malay? How is the IHS quality any improvement?
hey guys me and clon22 just got them today from the same place.. i'm running orthos now.. keep getting bsod with 1.38V small fft 8k. that happens like at the end of the second round. so now upped vcore a little. and trying again. ihs quality seems like the same as my l631b. i'll be going upwards in speed so 4ghz run will be last. its exam period gotta slow down ;) oh yea F are Malaysia~ and i forgot to say... this chip is HOT! inline with B's
nice chip there.
32m >4.1 gig on air is really nice output :toast:
I did a quick run on my 629F...
Not veri good thou...
Not stable...
http://i76.photobucket.com/albums/j3...9_4434_22v.jpg
A little bit more. I think more vcore could give another boost.
Usually, I'm not interested in doing Prime. :D It's too much exhausting. My 24/7 setting with this CPU is 3.3g/Vcore 1.28. I've not a single trouble in any kind of tasks yet. Also, I tested dual 32M SPi under 3.6g/Vcore 1.36.
http://kr.img.blog.yahoo.com/ybi/1/0...1170318624.jpg
Holy!.....
Wow man...
thats some cool chip u have there..
466 3-3-3 ain't too shabby either. :slobber:
wow
your "F"Code is Very Good
this test in A-DATA 6400 Extreme Edition 512M*2 ?
Yep. A-DATA Viesta Extreme Edition 512M X 2. Its part is known as D9GCT IC. :)Quote:
wow
your "F"Code is Very Good
this test in A-DATA 6400 Extreme Edition 512M*2 ?
Thats the most imperssive to me :)Quote:
Originally Posted by Zeus
How much vdimm for 466 3-3-3?
wow u guys sure got LOW temps! haha well mine's same as clon22. i'm not at home now so i dun have pictures to share. maybe later today. haha anyway i'm not so hardcore as u guys but here's my link. hope it helps. please do feedback okay~
it sure needs lots of volts. and its sure a hottie.
http://forums.vr-zone.com/showthread...02#post3210702
Vdimm was 2.75v. No mod on Vmch. At now, I'm going to mod Vcore for more deep(?) investigation :banana:Quote:
Thats the most imperssive to me
How much vdimm for 466 3-3-3?
Your ari cooling ststem is very good set ~! & Monster CPU :eek:Quote:
Originally Posted by anarinsk
I have an E6600 "F" ES B0 4
what about it ?
I can do 4.5 unser ss...
I want mine to go that high. Then again, I don't have winter air blasting my computer.
I find a F step; test tomorrow :D
http://sugeknight.info/PC/Processeur...00L639F032.jpg
I have an F as well. Ambient temp 21 C. Running in my Antec nine hundred with a Tuniq Tower 120 cooler my machine idles at 19-20 C, and the highest I've seen after gaming is 37C.
i got a L633F012 but it could not prime blend stable at 3.6 for more than 6hrs at 1.6v even i can bench at 1.4v....got another L632F045 and test if this week32 is performing as good as urs :)
Finally, my 6600 is not brilliant :(
Max spi 1M 1.7V / P5B / water:
http://sugeknight.info/PC/Processeur...32/spi3984.png
Max screen:
http://sugeknight.info/PC/Processeur...screen4044.png
Max fsb: 470 Mhz :confused:
my 2nd F is still abt the same as my first or only slightly better..
B stepping is still the king here :D
Yes. In the case of Intel, Batch/Code seems to be not so relevant as AMD. F code of my friend was not so promising as mine :)
i guy,i want report my experience with "F" Conroe :)
The CPU
The Chipset
The Mainboard
Some result can you see on my sign :)
Very interesting the temp and the high scalability, with +.25v i've stable @ 375*9=3375 37° idle/53° full load, with 1.45v i bench for 5h @ 400*9=3600 ,max temp 68° STOCK COOL!
Now my shop got few units of E6600 629F and one last unit 631B,
which one should i go for ?
the B version ?
i just baught a L629F cpu
520 max fsb under tuniq tower 120 (ds4 limit)
i can get it prime stable few minutes at 3900mhz for 1.53v real vcore, 75°C load temp with TAT
It's really good clock. ;)