Twins - 640MB Gainward Bliss 8800GTS Dual DVI (G80 series)

to each his own.. everybody's is different... my ease is 12k at least in 3dmark06 for single 8800GTS :D

But 3dmark06 isn't the end all, gaming would of different too.. just a conroe would flog an opteron :)

I can see same frames in all games that means less than 5% in real world gaming
________
Ford Ikon specifications

Awesome info. as usual eva :toast:

Thanks for sharing.

Thanks for the download Eva, really appreciated. Hopefully users of other manufacturers cards will let us know what they come up with using Expertool.

So did the Expert Tool work with other brands ?

good question, I was hoping to hear back an answer too.

On ya eva2000 the Expert Tool works with my Albatron 8800GTX.

Oh god I can't wait to see the twins come out and play :D

Say Daffy67, can you set clocks and fan speed and have them stick after a reboot?

Fan speed stayed but overclock did not upon re-boot.

Quote:

---

Originally Posted by eva2000

So did the Expert Tool work with other brands ?

---

didn't work on my SLI setup. maybe because i have 2 differant cards.

Single Gainward Bliss 8800GTS Stock hsf @650/2050

http://fileshosts.com/intel/Asus/P5B...0_12055_tn.png

eva can u run a fast 01 with LODS ? with X6800 @ stock :D plz
thx in advance blind

never owned a X6800 hehe

why don't you use hacked drivers for SLI on 965/975..........Sam's had them up for a while here :toast:

hacked drivers don't work with 8800 series :(

8x.xx drivers don't support 8800 series, yea

Quote:

---

Originally Posted by theteamaqua

for E6600, i have a E6400 3.4GHz + single 8800GTS 660/2030 and scored 10850 on 3dmark06

u had E6600 OC to 3.9GHz,

RAM only gives u little boost. I remember changing multiplier from DDR2 800 to DDR2 1000 was like a 50 points difference..

---

4mb cache = + 3K in 2001 :)

Just wait till eva starts using SS :) Allendale @ 4.5+Ghz SS benchable is not possible yet :)

Got my Gainward 8800 GTS Bliss a couple of days ago.

Got it mounted on my P5B DLX / E6600 / Team Extreem PC8000.
It´s right on par with your 3dmk05 results eva

http://img01.picoodle.com/img/img01/...2063c4bb2b.jpg



Used Expert Tool for starters...gpu seemse to be maxed out but the memory has got more to give.
Read over at Guru3d forums that there´s coming out a new version of Rivatuner next week v.16.2 fully supporting G80 cards and a working fancontroler. Will be pushing the memory further when it´s due out.

nice.... play with GPU clocks and monitor the resulting fps for each score as i found at 660Mhz GPU i got slightly lower score than at 650Mhz :)

eva, how is your card/cards mounted? in case or on a "bench rigg"...?

Got my stuff in a Lian-Li PC6070 and I got some serious heat coming out of that card and it´s affecting the rest off my rigg...even thou I have pretty eficient case cooling.
Under load my card temp is in the hight 70s C...doesn´t feel like the "fan controler" is really working as expected.

bench rig... 4 out of 6 of my pcs are caseless... haven't needed a case for past 4+ yrs LOL

Get a fan over the video card.. zalman fan bracket is my friend ;) :)

but 70C is normal i say

Quote:

---

Originally Posted by eva2000

bench rig... 4 out of 6 of my pcs are caseless... haven't needed a case for past 4+ yrs LOL

Get a fan over the video card.. zalman fan bracket is my friend ;) :)

but 70C is normal i say

---

thats the spirit:toast:

Hey eva, I can't get the GPU more than 630 without crashing, the mem seems fine at 1900. I'm using the ATI Tool Beta 16 Pre 7 (I think) and tried Expert Tool as well. At 650 it crashed even when only running the 3D cube. Using 96.89.

Any ideas? I got the same Gainward btw. :confused:

i used ATI Tool beta 16 pre8.. try lowering mem clock for higher GPU clock until you find the right balance :)

So is there anyway to make the OCs and fan speed stick after each reboot. I heard that there is a way to make coolbits work with the 8800 series through a NVTray hack.