just ordered one today , thursday i will receive it then i post results
regards
Printable View
just ordered one today , thursday i will receive it then i post results
regards
here is a 3d mark 2005 @ stock freq. (windows xp sp1)
http://img460.imageshack.us/img460/5...nstitreya8.jpg
not too bad :)
i got mine in a few hours , with conroe E6400 @ 3.5ghz and x1950 default maybe 13k ;)
regards
Quote:
Originally Posted by mascaras
...you should.
i get 12400 with 165 @ 2,88 and the x1900xt @ 715\810... so that should be easy!
well got mine today , but i had to change right away the stokcooler , o got 65c idle with stokcooler :eek: :eek:
i run a 2k5 with VGA default and E6400@3500mhz , witout format hard drive , ........
http://img49.imageshack.us/img49/5972/2k5x199sy5.jpg
one question , why the ATITOOL dont show the temps and the Voltages in X1950 ?????
regards
How well does it overclock? Also, where did you purchase it from? Thanks!
i didnt overclock yet .
I found the diferences betwen this x1950 256mb and my old x1900xt 256mb , its only the voltages
X1900XT -------1.425v core and 1.896v memory
X1950XT ------- 1.45v core and 2.185v memory
regards
I also think that the memory timings are maybe relaxed cause i downclock de memory to the cloks of the x1900xt 256mb and the x1900xt scores more in 3dmark 2005 with same cloks
regards
hi guys, i started to install cata 6.10 for a x1950 xt and at the beginning, i've got an erroer message saying that "setup cannot find compatible video card" and then it stops!! i do'nt understand where's the matter
yep , the only drivers that works are the 6.10 (only the one that came with VGA mot any other 6.10 from internet) and 6.11 beta
i found if we overclock a litle the memory like 5Mhz the score goes up
648mhz core and 905mhz memory E6400@3500mhz >>>>>>>>>> 12770 marks
regards
i'm waiting for a new version of ati tool...as you say un tech'forum, only ATT can read voltages
waiting for omega based on catalyst 6.10 :)
new atitool beta 16 pre 8 released works with x1950xt :D :D
download >>> http://www.techpowerup.com/wizzard/A....25b16pre8.exe
http://img300.imageshack.us/img300/4543/atitoolum4.jpg
:D :D :D
BTW: X1950XT with sotkcooler its too dam Hot (65c idle) , with the Waterblock i had in my previous X1900xt a got excelent Temps:
http://img358.imageshack.us/img358/4...elentesfi8.jpg
I also find this >>>
its possible????Quote:
X1950XT 256MB Can be used in Crossfire with another X1950Pro card on Crossfire motherboard
http://www.auspcmarket.com.au/index....info.php?input
regards
a new problem appears for me and i wanna see if i'm not alone with that :
By installing the drivers and direct x from the cd, all is oki : 55000 pts with 3dmark 01 and i offen go at 999 fps
to launch 3dmark06, i've to update the directx version (i take the last on from october)...all is ok, 'cause i begin 40 fps
After rebooting (and i didn't touch something else), all perfs go down : only 35000 pts in 01 and 18 fps at the beginning of 06!!!!!
does someone have the same problem????
I dont think so, X1950xt dont have that CF Plug on top of the Video Card.Quote:
Originally Posted by mascaras
If work like that, why Not 2x x1950xt.
How much faster is that card compared with x1900xt 256Mb?
thanks
where you find the beta 16? the link dont work.
I go to the main site, It show only Beta 15 is the newest.
x1950xt is 12% faster than 1900xt. also the Voltage is way higher than x1900xt.Quote:
Originally Posted by LittleDevil
Its a smasing card for the cash - but for Crossfire I still find it too be a complete waste of time.
Not inless they release a crossfire X1950XT Master card - for the price diference over the X1950XTX equivilent.. the X1950 Pro works out the better choice.
Either way.. a fantastic card.. still so bloody quick even with the G80's out!
Quote:
Originally Posted by AMD83
Atitool 0.25b 16 pre8 >>
http://www.techpowerup.com/wizzard/A....25b16pre8.exe
BTW: i clean my WC system look at my temps (i never saw a X1xxx at this temps )
http://img245.imageshack.us/img245/1...elentesly8.jpg
New ATitool pre8 also have memory timings to X1000 VGAs , anyone with a x1900xt 256mb can tell me the timings please '??
http://img166.imageshack.us/img166/8283/atitoolsy7.jpg
regards
Mascaras : Have you noticed the same probleme as me ("a few posts ago") by installing one of the last version of directx 9C and which give falling down perfs in 3Dbenchs with the x1950 xt
Mascaras, can u show some OC results with your water cooler or Stock cooler?
ALso can someone please tell me how to take ScreenShot on 3dmark and cpu-z.
Quote:
Originally Posted by rastaseb
nope, didnt notice that , all seams OK
open CPU-Z and chek if your Mobo didnt set pci-e x1 , some ASUS P5B deluxe after reboot set pci-e link width x1 instead x16 , that hapens with my x1900xt but with x1950xt its OK , always x16
@AMD83 , to take a screenshot just press the KEY Print screen , then open the PAINT and Past and Save
regards
thank you soo much! I never knew that. i was thinking only work on games.