poor Card , :D
Printable View
poor Card , :D
almost like performance.
allendale @ 2,8.
Galaxy 7900GS 1,4ns with stock cooling. very very poor cards :( I can even risk that mems aren't ocing at all :(
http://service.futuremark.com/compare?2k1=9063505
http://service.futuremark.com/compare?2k3=4992690
http://service.futuremark.com/compare?3dm05=2251678
http://service.futuremark.com/compare?3dm06=540598
LOD +3 no mods.
WTF ? sli ? :D @Niemiec
Some litle updates from me , no lod , no mod , chilled water cpu & vga .
http://img426.imageshack.us/img426/5854/01postyq8.jpg
http://img138.imageshack.us/img138/3530/03postwu1.jpg
http://img138.imageshack.us/img138/4678/05ls6.jpg
http://img417.imageshack.us/img417/4462/06pz6.jpg
http://img180.imageshack.us/img180/6544/aquacz1.jpg
http://img417.imageshack.us/img417/9515/single1fq0.jpg
http://img355.imageshack.us/img355/57/single2lb1.jpg
Wow! You are really going ALL out, Athens!!!! :clap:
Thnx. I must mod the card's Vcore and run some lod 2 end this story :)
as I said ALMOST like performance :/ 600 for GPU is max and 760 for mems :/ next I can only see BSOD with nv4disp.dll :lol:
and it's SLI :(
Wow that looks kickass :)
I have a question for you Athens, I have a 805D @ 3.6GHZ on Air I have a MSI X1900XT and I get 18000 in 3dmark 2003. I'm thinking of getting a E6300 and clocking it to 3GHZ. I would get a bigger score in 3dmark with E6300 Correct?
Is this a good watercooler to start off with, I don't have lots of money atm but I want something easy to install.
http://www.pccasegear.com/prod2362.htm
Would this allow me to push my Chip to 4GHZ without throlling back because my Artic Freezer 7 pro can not perform properly at such high temps?
On 01-03 you will see a nice performance ,on 05-06 you will see also but not huge as 3dmark01 . As for the watercooling kit it''s an entry one . I suggest to start reading [make a search on xtremesystems eg watercooling kit'' ] so u can set up a custom one .
Some little updates with 6600@4000~4.050mhz
http://service.futuremark.com/compare?2k3=5050737
http://img103.imageshack.us/img103/1286/03aa0.jpg
http://service.futuremark.com/compare?2k1=9088469
http://img247.imageshack.us/img247/6273/01nc9.jpg
Card unmoded :D
Wow nice clock on the card. Now lets se some wild vmem and vcore...
Bloody nice setup.
What week is the E6300 may I ask?
Dont know :P i sell it . Maybe if i had a pic at home we will find. But the cpu was 500X7 prime stable on water or good aircooling [maybe higher also but my mems max out at 500 @ 2.25vdimm]
I start searching for vgpu - vmems pencil mod but im a bit comfused. Can someone who has done this mod [ with pencil ] post 1-2 pics for vgpu and vmem ?
Thnx Tom .
If the card is still unmoded than those clocks are really awesome.:toast:
Here is what i did with Asus EN7900GS on DICE http://www.xtremesystems.org/forums/...2&postcount=14
Yep unmoded Max benchable 710-830 with water . Nice scores @Shark-357 :toast:
i think i ll do this.
http://img92.imageshack.us/img92/1198/vgpumodqk6.jpg
For vgpu this mod, and for vmem simly pencil mod from 7900GT
:toast:
Post a pic please [vmem] :) .
Thnx Tom.
mh gone get myself some bison electro tommorow :p:
This vgpu mod is not working on 7900GS, but vmem is ok :D 2.25V with pencil mod ;)Quote:
Originally Posted by Athens[2004]
http://resources.vr-zone.com.sg/Sham...s/79gtvmod.jpg
Vmem done and working nicely :D
Gain 100mhz on rams [from 830~ -> 930~] vgpu left
http://img153.imageshack.us/img153/4065/vmemzz4.jpg
Wery impressive. Have you done any vgpu mod?
I 've done once with a pencil but didnt work :( i think couse of the long distance between solds. I'll try later with a cable.
Pencil for vgpu ? Not good idea :p:Quote:
Originally Posted by Athens[2004]
Solder cable an go, go :D
Ok:D
thnx. Tom
Nice o/c story man, good luck ;)