wow thats niceQuote:
Originally Posted by AndreYang
any mods or anything
Printable View
wow thats niceQuote:
Originally Posted by AndreYang
any mods or anything
Processor: E6400 @ 3.2Ghz
Motherboard: DS3
Memory: OCZ 2 x 1 GB PC6400 Platinum @ 5,4,5,15 800mhz
Cooling: Thermalright Ultra-120
FSB: 400
Memory Mult: 1:1
vcore: stock (1.325v)
vdimm: +0.3v
pcie: 105
gmch: normal
FSB: normal
Idle 31C
Dual Prime Load 47C
Processor: E6400 @ 3.2Ghz
Motherboard: P5W DH
Memory: Mushking XP PC6400 @ 5-3-3- 800mhz
Cooling: Cu TDX w\ 120mm BLack Ice Extreme, Panaflo Medium
FSB: 400
Memory Mult: 1:1
vcore: 1.385
vdimm: 2.1v
pcie: 110MHz
mch: 1.65v
Still working on it but thus far:
Processor: E6400 @ 3.280Ghz
Motherboard: DS3
Memory: OCZ 2 x 1 GB PC6400 Platinum @ 5,5,5,15 800mhz
Cooling: Zalman cnps9500
FSB: 410
Memory Mult: 1:1
vcore: stock
vdimm: +0.3v
pcie: 100
gmch: normal
FSB: normal
Idle upper 30C's
Dual Prime Load 50Cish
Dual prime stable and ran 3dmark06 a few times no problems for either with the new f4e bios.
Weird, I'm using Coretemp to monitor temps and I have it at 3.2ghz and it's reporting load temps in the 58-60c range but when I stop Ortho is drops down to 40ish and AIBooster/PC probe report load temps @ 43-44c, on stock volts. I touched the heatsink too and its not warm at all. Also shows 30-32c in BIOS whenever I boot up.
Wow I can't believe all of you guys are running 3.2ghz+ 400fsb+ using default VCORE!!! I need to pump my vcore up to 1.4125v to get my ds3 to post at 400fsb.
I wonder what causes some e6400/ds3 combos to be able to be stable at stock vcore with 400fsb???
so this is the DS3?Quote:
Originally Posted by HeadShotWI
http://www.newegg.com/Product/Produc...82E16813128012
and this is the P5W-DH that you all got?
http://www.newegg.com/Product/Produc...82E16813131025
Yep.Quote:
Originally Posted by splat00n
Processor: E6400 @ 2.8Ghz
Motherboard: DFI Infinity 975X/G
Memory: Infineon 2*512MB DDR533
Cooling: Sonic Tower 120
FSB: 350
Memory Mult: 4:3
vcore: stock (load 1,24v / indle 1,26v)
vdimm: 1,9v
pcie: 100
gmch: normal
FSB: normal
Idle 35C
Dual Prime Load 50C
It´s the max stable ....
wow, thats really hardcore. vcore 3.4V. Amazing. You are my guru :eek: :banana: :banana:Quote:
Originally Posted by HeadShotWI
Processor: E6400 @ 2.8Ghz
Motherboard: Gigabyte 965P DS3
Memory: CORSAIR XMS2 2GB TWIN2X2048-6400 at 875mhz
Cooling: Scythe Ninja+ with Scythe fan (1250rpm)
FSB: 350
Memory Mult: 2.5
CPU Voltage: 1.39
vdimm: 2.0v
pcie: Auto
gmch: normal
FSB: normal
Case: Antec P180
Idle 34C (20 minutes after prime)
Dual Prime Load 50C
System 40c
Tested for 3hrs in Dual Prime
Look out for concave Heat Spreaders. I went from 40c/54c to 28c/42c after lapping the heat spreader and remounting the WB.
http://tspaulding.home.insightbb.com/pics/oc2.jpg
http://tspaulding.home.insightbb.com/pics/oc3.jpg
.
-Pitt
.
Processor: E6400 @ 3.2
Motherboard: ASUS p5w DH
Memory: Corsair 6400 5-6-6-18 (should be 5-5-5-15 damn spd setting)
Cooling: Koolance EXOS
FSB: 400
Memory Mult: 1:1
vcore: 1.45 ( will be lower soon)
vdimm: 2.0
Abient temp 25 C
idle 35/36
load 52/52 (Dual Prime)
http://www.prntscrn.net/img.php?img=3.2stable_2.jpg
http://valid.x86-secret.com/show_oc.php?id=111834
Processor: E6400 @ 3.0Ghz
Motherboard: Intel D975XBX
Memory: PQI2-5400 @1.9V
Cooling: Gigabyte G-Power Pro GH-PDU21-MF (3000rpm)
FSB: 376
Memory Mult: 1:1
CPU Voltage: 1.275 (Stock!)
Vdimm: 1.9v
pcie: Auto
Vmch: Auto
FSB: Auto
Case: Aluminum Wonder
Idle: 37/36C
Load: 54/53C (Dual Prime)
System: 38c
Ambient: 28C (Texas heat)
Tested Dual Prime Stable
NOTE: Memory is holding me back. Once it topped out there was nothing I could do. When I get my PC2-800 memory, I expect to get to FSB=400MHz easy :)
http://img92.imageshack.us/img92/466...sramyb9.th.jpg
very nice one :clap:Quote:
Originally Posted by JamesJ
Processor: E6400 @ 3.4Ghz. L624A847
Motherboard: Intel X975XBX (1066 strap)
Memory: OCZ 2x512Mb PC2-8000 Plat XTC @ 5-5-5-15
Cooling: Vapochill LS
FSB: 425
Memory Mult: 1:1
vcore: 1.45V
vdimm: 2.2v
mch: 1.725v
Motherboard gives up any higher
i'm mobo limited atm but running 360x8 with downvolt @1,15 :)
waiting for better mobo to run 500x8 24/7 :D
Processor: E6400 @ 3.2Ghz
Motherboard:MSI X975 PowerUP
Memory: Gskill PC6400HZ
Cooling: Tower 120
FSB: 400 Memory Mult: 1:1
vcore: 1.38v
vdimm: 2.25v
pcie: 105
gmch: stock
Idle .37C, Load 57C
i wish i had better mobo
using p5b atm :D
http://img85.imageshack.us/img85/919...t1hrnh3.th.jpg
still going :)
i love this downvolt with +~800mhz :toast:
is that P5B or P5B Deluxe
p5b vanilla :(Quote:
Originally Posted by dinos22
my ds4 ain't posting/booting with conroe only with pd 805 works fine :slapass:
this is my new built E6400 and DS3 bios F4. using 2x 1024mb ddr2 800 mushkin value ram.
1st test, vcore @ auto, vmch +0.1, vpci +0.1, vfsb +0.1, vdimm and memory timing all at auto.
400x8, 1:1
http://img335.imageshack.us/img335/3...w26pi1mlt5.jpg
E6400 at 3.3ghz(412x8)1.4v
Gigabyte DS3 F4a bios
OCZ2P8002GK 4,4,4,12@2.1v
eVge 7950GX2
http://img232.imageshack.us/img232/6479/c2dkq8.th.jpg
Quick question to all E6400 owners: Is 1.45 Vcore safe for 24/7 use?
http://img333.imageshack.us/img333/4135/cpuzlh2.th.jpg
Processor: E6400 @ 3816.2 MHz (477x8) 1.5v
Motherboard:Memory: Corsair Twin2X DDR2 2x 512MB 800MHz CL5-5-5-12
Cooling: WC in sig
vcore: 1.5v
vdimm: 2.00v
pcie: 100
gmch: +1
btw.max cpu-z , 1 day oc and nice results ;)