How to overclock FSB to 550MHz on P5B-Deluxe

Printable View

Show 100 post(s) from this thread on one page

08-12-2006, 06:04 PM
tanghiro

1 Attachment(s)

Thanks to Andre

Follow Andre's Over-Voltage Recommendation, I got FSB552:D
08-12-2006, 06:18 PM
jimmyz

Quote:

Originally Posted by tanghiro

Follow Andre's Over-Voltage Recommendation, I got FSB552:D

:woot: now up the multi and let's see some results!!! please please:D
08-12-2006, 06:28 PM
775911

The king is dead, long live the king ?

The fsb has now been overclocked by over 100% :guitar:
08-12-2006, 06:31 PM
Ace-a-Rue

this mod is NOT for the faint hearted...you will need a huge magnifying glass, steady hand, low power soldering gun and a LOT of courage:D
08-12-2006, 06:32 PM
775911

So a bit of conductive paint/pen isnt going to work out then :D
08-12-2006, 07:05 PM
railer

Quote:

Originally Posted by Ace-a-Rue

this mod is NOT for the faint hearted...you will need a huge magnifying glass, steady hand, low power soldering gun and a LOT of courage:D

Plz this mod is not so hard. All you need is to solder a wire to the resistor. Now if you would need to solder a wire to a small pin it could be chalenging. I only solder to the pin if there is no alternative. Usualy i try to search for continiuty from the pin to resistor and solder to resistor instead. Anyone with basic soldering skills and $8 low power soldering iron can do this mod;)
08-12-2006, 07:12 PM
Ace-a-Rue

you are a better man than me...i am not a good solderer
08-12-2006, 07:17 PM
railer

lol get a junk MB and start to practice. I could not solder before ether.... In 2-3 days you will get comftible with iron and this mod will not scare you anymore :)
08-12-2006, 09:41 PM
Tasselhof

AndreYang, can you post results for vMCH 1.65(unmodded, maximum in BIOS) on this board?
08-12-2006, 11:38 PM
ben ifin

Hi AndreYang & tanghiro

I'm still waiting on my P5B Dlx.

Two quick questions please

( i ) Can you please post a picture of the completed mod ?

( ii ) Can you please advise the highest FSB you can get when using
just 1.65v for the MCH ?

[ Reason I ask is that BIOS 0507 allows MCHv up to 1.65, so for those of us that are poor / shaky solderer's, I'm wondering how high a FSB 1.65v will get us ? ]

Many thx,
Ben.
08-13-2006, 12:49 AM
Drow

Are the OC-abilities with a â€œAsus P5B Deluxe WiFiâ€ limited? Because of the WiFi?
08-13-2006, 01:36 AM
over@locker886

Quote:

Originally Posted by tanghiro

Follow Andre's Over-Voltage Recommendation, I got FSB552:D

Please try higher multi!
Thx
08-13-2006, 01:41 AM
Kallenator

This looks better and better people but I got to ask again, What is 24/7 safe MCHv?
08-13-2006, 02:02 AM
bugeyes

I haven't done the mod yet but 6x500 is benchable, but 7x500 is not :( even though 3500MHz is fine at lower FSB.

P5B-Deluxe
TT Blue Orb
Gskill64002GBHZ
MCH = 1.45v

http://www.users.on.net/~bugeyes/ind...20copy%202.jpg
08-13-2006, 03:36 AM
thehellrazor

Is it any difrence in max FSB on Asus P5B and the deluxe version ??
Is this mod working on Asus P5B ?
08-13-2006, 03:43 AM
cpulloverclock

Nice Andre and tanghiro :), I'm sure it's possible to reach 550 and more with no mods and 24/7 rock stable around 510-520 ;)

soon... :D
08-13-2006, 03:50 AM
Frank M

Quote:

Originally Posted by tanghiro

Follow Andre's Over-Voltage Recommendation, I got FSB552:D

AGP x1? :hm:
08-13-2006, 04:22 AM
ice78

Nice info! :)
08-13-2006, 06:19 AM
overcrash86

Quote:

Originally Posted by cpulloverclock

Nice Andre and tanghiro :), I'm sure it's possible to reach 550 and more with no mods and 24/7 rock stable around 510-520 ;)

soon... :D

agree with you cpull :D
08-13-2006, 08:24 AM
thehellrazor

Do these mods work on P5B non deluxe too ??
08-13-2006, 10:59 AM
railer

Quote:

Originally Posted by bugeyes

I haven't done the mod yet but 6x500 is benchable, but 7x500 is not :( even though 3500MHz is fine at lower FSB.

I dont get it .You have retail 6600 and you can change multy downwards to 7? Didnt know its possible i thought only ES have lower multy option.
08-13-2006, 02:38 PM
Moonraker™

I'm not at all good at hard-mods, and now 0507 supports up to 650mhz BIOS NOW!

http://img123.imageshack.us/img123/2759/image1li8.jpg
08-13-2006, 02:57 PM
Metroid

Quote:

Originally Posted by Moonraker™

I'm not at all good at hard-mods, and now 0507 supports up to 650mhz BIOS NOW!

LOL I got that board to my server multimedia station :rolleyes: .
08-13-2006, 04:27 PM
Moonraker™

I've just ordered it. Can't be arsed waiting for 590 SLi and this board looks far too good to turn down.
08-13-2006, 05:16 PM
Frank M

Quote:

Originally Posted by railer

I dont get it .You have retail 6600 and you can change multy downwards to 7? Didnt know its possible i thought only ES have lower multy option.

It is possible with retail, too. You just can't change it upwards; and even downwards, it's just a step or two.

Show 100 post(s) from this thread on one page