Biostar TForce P965 Deluxe - 530FSB 1:1 4-4-3-4

Quote:

---

Originally Posted by majestik

530fsb on a board with onboard-video. I think hell just froze over :D

---

onboard-video :nono:

Great post Stilt, righr when I was about to buy the Gigacrap board and start the bios saga again, as Gigabyte does it always with their crappy engineeers.
I will definitely go for the Biostar board.

Quote:

---

Originally Posted by Pt1t

onboard-video :nono:

---

Sorry I was mistaken
http://image2.sina.com.cn/IT/h/2006-...0c5e6b6217.jpg
From the top, it looked like a VGA connector

Quote:

---

Originally Posted by Pt1t

:banana: , it s tomorrow :D

---

Indeed.

http://www.armada.fi/TForce_P965/TFo..._VDDR2_Mod.jpg

Lower the resistance to raise the voltage.
The DDR2 voltage reading in bios is way off, so use multimeter to measure the actual voltage.

At first it may seem that the voltage is raising quite slow when lowering the resistance. However at 2.3V+ the voltage is raising VERY fast so lower the resistance VERY slowly. The memory voltage can be measured from the coil nearest to the ram slots.

Strangest Vmod I've seen so far :D Board is looking very sweet. Stilt how much does it cost in Finland? (I can't find it in any US/European online shop :().

Quote:

---

Originally Posted by ent

Strangest Vmod I've seen so far :D Board is looking very sweet. Stilt how much does it cost in Finland? (I can't find it in any US/European online shop :().

---

It costs 127€ (VAT 0%).

How about using a DDR booster?...too risky?

Quote:

---

Originally Posted by thebeast

How about using a DDR booster?...too risky?

---

Is there a DDR booster for DDR2?

Ahhh..crap,my bad.:(
Still migrating my brain slowly to the new platforms.:D

I thought Hipro said its compatible with both, otherwise it would'nt be worth it for him to develop such a product thats only works with dead-end ddr.

http://www.xtremesystems.org/forums/...=42220&page=44

Quote:

---

Originally Posted by thebeast

How about using a DDR booster?...too risky?

---

Why use that , mod is very easy :D

Does anyone know of any UK retailers that stock Biostar boards? 530fsb, mightily impressive :)

Ordered one for just 112 euros :toast:

Quote:

---

Originally Posted by trojan

Does anyone know of any UK retailers that stock Biostar boards? 530fsb, mightily impressive :)

---

I wouldnt mind finding a U.K. supplier either

Same here^
I dont know anything about volt modding either btw.:)
EDIT:looks like Hipro's does support DDR2 :toast:

So can we get this board in the USA yet or no ?

530 FSB !!!! damn that is awesome.

How much does this board cost approximately ?

Amazing, it's WR FSB?:eek:

@ DarkLord:
In a German shop it's sell @ 129Euro:)

Quote:

---

Originally Posted by nachthymnen

Amazing, it's WR FSB?:eek:

@ DarkLord:
In a German shop it's sell @ 129Euro:)

---

118€ ;)

http://www.geizhals.at/deutschland/a209793.html

That board looks good. I was always more than happy with the Biostar boards I owned so far :)
Would be interesting to see how it compares speedwise to a DS3 or P5W. High FSB aint everything..

Quote:

---

Originally Posted by Fr3ak

That board looks good. I was always more than happy with the Biostar boards I owned so far :)
Would be interesting to see how it compares speedwise to a DS3 or P5W. High FSB aint everything..

---

i ll have ds4 soon , to compare both board.

I have never actually owned a Biostar board before, this might be my first :D

Quote:

---

Originally Posted by Fr3ak

That board looks good. I was always more than happy with the Biostar boards I owned so far :)
Would be interesting to see how it compares speedwise to a DS3 or P5W. High FSB aint everything..

---

and comparo to MSI 975X Platinum :D

Cmon UPS...bring...to ME NOWWWW :yepp: heeh

SuperPI 32M at 530FSB is easy :D

http://www.armada.fi/TForce_P965/TFo...FSB_SPI32M.jpg

If biostar can change bios to do 530fsb, than maybe asus can do sommethink similar. ~500 pn P5W DH would be gr8. I`m talking without moding.
Nice job The Stilt.

This is randomly picked ?