"First Run WR" Conroe+7300GT SLI on Air..

Printable View

Show 100 post(s) from this thread on one page

08-02-2006, 12:26 PM
The Stilt

Quote:

Originally Posted by zakelwe

Are you sure they are working at 825Mhz core ? Very low Canyon score compared to the score on the first page of this thread ...or am I missing something on first look ?

Can you run the fill rate tests to confirm ? If it is running 825Mhz is it running SLi ?

I'm puzzled :confused:

Regards

Andy

Err, I didn´t see any other single card scores besides mine?
08-02-2006, 02:07 PM
Cooper

7400 with single card ? WOW
08-02-2006, 02:12 PM
The Stilt

Quote:

Originally Posted by Cooper

7400 with single card ? WOW

Yep, pretty fast for little over 100€ :D
08-02-2006, 03:13 PM
zakelwe

Oh dear I knew it would be me .. I really ought to learn Finnish -English statements :rolleyes:

:D

:toast:

You must have two of them surely ? ;)

Regards

Andy
08-03-2006, 08:51 AM
The Stilt

Now it is time for SLI :D

First run in SLI:

http://www.armada.fi/Inno3D_7300GT/I..._750_1740-.jpg

http://service.futuremark.com/compare?3dm05=2140270

There are plenty of MHz left in these cards.
I had a major hdd corruption on my bench system so I need to recover it first.

Both cards can pass easily 810MHz GPU with 1.75V.

It seems that Inno3D has quite large tolerances.
In the same batch, there are atleast three different cards.

Most of the cards have Infineon or Samsung 1.4ns memory chips.
The percentage is almost fifty-fifty so far.

I even found one card with 1.2ns Samsung chips on it.
Guess where is it now ;)
08-03-2006, 09:09 AM
[cTx]Philosophy

Man these cards are sick, Have you played games with them, Id like to see ow they fair against oblivion with bells and whistles turned up, it kills my setup
165 @ 2.9 and 7800gt 500-600
08-03-2006, 09:59 AM
hausner

impressive 3dmark results , keep pushing !
08-03-2006, 11:36 AM
over@locker886

Quote:

Originally Posted by The Stilt

Now it is time for SLI :D

First run in SLI:

http://www.armada.fi/Inno3D_7300GT/I..._750_1740-.jpg

http://service.futuremark.com/compare?3dm05=2140270

There are plenty of MHz left in these cards.
I had a major hdd corruption on my bench system so I need to recover it first.

Both cards can pass easily 810MHz GPU with 1.75V.

It seems that Inno3D has quite large tolerances.
In the same batch, there are atleast three different cards.

Most of the cards have Infineon or Samsung 1.4ns memory chips.
The percentage is almost fifty-fifty so far.

I even found one card with 1.2ns Samsung chips on it.
Guess where is it now ;)

Nice results:toast:

Go-Go 7300GT's:)

I will vmod 7300GT and run bench ,next week.
08-03-2006, 02:12 PM
The Stilt

These cards need desperately more memory bandwidth.
60MHz increase in the GPU frequency gained less than 500pts :(

I´ll try little higher voltages for the memory ;)

http://service.futuremark.com/compare?3dm05=2140743
08-03-2006, 11:33 PM
zakelwe

Quote:

Originally Posted by The Stilt

These cards need desperately more memory bandwidth.
60MHz increase in the GPU frequency gained less than 500pts :(

I´ll try little higher voltages for the memory ;)

http://service.futuremark.com/compare?3dm05=2140743

I can believe that .. since 6200/6600 days nvidia low end has always struggled with bandwidth .. the gpu is too far ahead of the memory they put on them at the low end, even now with GDDR3 because it is in SLI. I suppose it will only get better with GDDR4 and then initially it might be too expensive.

I bet the 8300? series will suffer terribly from this as well :(

Regards

Andyl
08-04-2006, 07:41 AM
joshua7

Nice scores man!
Regards from Hungary too.:)
08-06-2006, 07:52 AM
ashley

really nice result for little cards!
what about the 7300gs?
08-10-2006, 02:46 AM
Fr3ak

7300GS cards only have a 64bit Ram interface. I doubt they are worth more than running office. And I dont think they support SLi, but I am not so sure about that.
Edit: Ok I just noticed that there is a Xpertvision 7300GS that has 128MB DDR3 128bit Memory according to their website, but it doesnt seem to support SLi
08-10-2006, 04:08 AM
CraptacularOne

Quote:

Originally Posted by SillySider03

There is no room for logic and reason here, this is XS! Conform or be cast out!

WTF?
08-10-2006, 04:34 AM
CraptacularOne

lol...I don't care about peoples ego, I only speak the truth......
08-10-2006, 04:40 AM
Stoolman

:toast: Great scores! Now... mod the mobo and the VGA cards and make us proud!! :D
08-10-2006, 04:45 AM
zakelwe

Quote:

Originally Posted by CraptacularOne

lol...I don't care about peoples ego, I only speak the truth......

I just edited up your truth and both you and Sillyslider can perhaps think about how you get your point across. The reason for the deletion should give you a clue.

PM me if you have further to say on this point

Regards

Andy
08-29-2006, 05:37 AM
pleasure

Can someboy tell me where i can find a detailed volt-modding guide for the 7300GT?

Show 100 post(s) from this thread on one page