Quote:
Originally Posted by dinges
It isnt an online shop ^^ Just a friend who knows biostar dealer.
Printable View
Quote:
Originally Posted by dinges
It isnt an online shop ^^ Just a friend who knows biostar dealer.
²nd that!Quote:
Originally Posted by dinges
link plz! :p:
Quote:
Originally Posted by SMa
by him ... http://netcomputers.be/
It s a friend and his website isnt updated :toast:
Just mail him for a biostar mobo. (Belgium dealer is ITC multimedia , but you have to buy it by a shop).
My french isn't very good, so I'll ask here :p:
Could you tell how much this board costs?
And when will you try other ram? I want to see how good it is at oc'ing :D
Also you quote Anandtech, but I can't find it. Could you link? ;)
-->2*1go Gskill F2-6400PHU2-2GBHZ for wednesday
It cost ~170€
and http://www.anandtech.com/mb/showdoc.aspx?i=2797
But need also a new bios to do high fsb
There is benefit from overclocking ECC ram . You can clock higher because of the error correction . Articles in google say that there is a slow down when ECC tries to correct errors (2% approx) , but i haven't seen any slowdown myself .Quote:
Originally Posted by Lestat
I have 3 pairs of D9DQT (Fatbody) and all of them can clock about 15-20Mhz DDR2 higher when ECC is enabled . I run always with ECC enabled .
If i need the faster running memory (More Mhz) , i can have it without problems when enabling the error correction . Of course the benefit from clocking CPU higher is more than the "supposed" slow down of the ECC .
OK that boot correctly with 2*1go Gskill F2-6400PHU2-2GBHZ
and an E6600es Step 5.
Biostar TForce P965 Deluxe
http://www.biostar.com.tw/news/TForce_P965_Deluxe.html
http://users.skynet.be/pt1t/biostar/biostart965.jpg
Market Segment: Mid-Range/Performance
CPU Interface: Socket T (Socket 775)
CPU Support: LGA775-based Pentium 4, Celeron D, Pentium D, Core 2 Duo
Chipset: Intel P965 + ICH8R
Bus Speeds: 266 to 500 in 1MHz Increments
Memory Speeds: Auto, 533, 667, 800
PCIe Speeds: Auto, CPU, Fixed at 100MHz, 100MHz~200MHz
PCI: Fixed at 33
Dynamic Tuning: V6 Tech - 10%~15% \ V8 Tech - 15%~25% \ V12 Tech - 25%~30%
Core Voltage: Startup, 1.10000V to 1.80000V in 0.00625V increments
CPU Clock Multiplier: Auto, 6x-11x in 1X increments if CPU is unlocked
DRAM Voltage: 1.8V, 2.0V, 2.1V, 2.2V
DRAM Timing Control: SPD, 8 Options
FSB Termination Voltage: Auto, 1.2V, 1.3V, 1.4V, 1.5V
NB/SB Voltage: Auto,1.5V, 1.6V, 1.7V, 1.8V
Memory Slots: Four 240-pin DDR2 DIMM Slots \Dual-Channel Configuration \Regular Unbuffered Memory to 8GB Total
Expansion Slots: 1 - PCIe X16 \ 1 - PCIe X4 \ 1 - PCIe X1 \ 3 - PCI Slots 2.3
Onboard SATA/RAID: 6 SATA 3Gbps Ports \ Intel ICH8R \ (RAID 0,1,1+0,5,JBOD)
Onboard IDE: 1 Standard ATA133/100/66/33 Port (2 drives) \ VIA VT6410
Onboard USB 2.0/IEEE-1394: 10 USB 2.0 Ports - 6 I/O Panel 4 Headers
Onboard LAN: Gigabit Ethernet Controller \ Realtek RTL 8110SC
Onboard Audio: Realtek ALC883 HD-Audio 8-channel CODEC
Power Connectors: ATX 24-pin, 4-pin EATX 12V
I/O Panel: 1 x Serial \ 1 x PS/2 Keyboard \ 1 x PS/2 Mouse \ 1 x RJ45 \ 6 x USB 2.0/1.1 \ 8-Channel Audio I/O
BIOS Revision: AWARD ip96a614 , 14juin2006
9XCode:Test system :
Tforce 965p deluxe bios 614
E6600 ES step 5
2* 1go Gskill F2-6400PHU2-2GBHZ
Tuniq Tower 120
Speedstep disable via le bios
fsb voltage 1.4v
nb/sb voltage 1.6v
Vdimm 2.2vbios , ~2.11v
http://valid.x86-secret.com/show_oc.php?id=107667
http://valid.x86-secret.com/cache/107667.png
7X
http://valid.x86-secret.com/show_oc.php?id=107672
http://valid.x86-secret.com/cache/107672.png
Super Pi mod 1.5 1M @ 3ghz , DDR2 800mhz bios ,
http://users.skynet.be/pt1t/6600es/3003mhz_1M.PNG
Super Pi mod 1.5 1M @3379mhz , ddr2 533 bios ,
http://users.skynet.be/pt1t/6600es/3379.PNG
..i cant change DDR2 timming via bios , It doesnt Boot And I cant see Mem frequence/timing under windows :stick:
http://users.skynet.be/pt1t/6600es/3200.PNG
Hello Pt1t,
I have two dimms of D9DCN but I don't find how to activate the ECC in the bios of the P5W DH. I have the 701 bios.
Does somebody know how to do ?
Thanks
Whats the max fsb do u think u'd get out of such a basic mobo with a bios update?
With old bios , the Gigabyte's motherboard (ds3,4 , dq6) did ~ 380fsb, and now more of 470mhz...Quote:
Originally Posted by Owen1978
I hope it 'll do the same on biostar tforce :) , Bios is first one from 06-14
Non , je ne sais pas , sur l aopen il y a avait la fonction :fact:Quote:
Originally Posted by antoine76
How hot is the NB @380fsb?Quote:
Originally Posted by Pt1t
It isnt hot. +- 35° cQuote:
Originally Posted by Owen1978
what's that realtek pci gbit controller doing on this mobo? :slapass:
The bios
http://users.skynet.be/pt1t/biostar/bios0.jpg
http://users.skynet.be/pt1t/biostar/bios1.jpg
http://users.skynet.be/pt1t/biostar/bios2.jpg
http://users.skynet.be/pt1t/biostar/bios3.jpg
http://users.skynet.be/pt1t/biostar/bios4.jpg
http://users.skynet.be/pt1t/biostar/bios5.jpg
http://users.skynet.be/pt1t/biostar/bios6.jpg
http://users.skynet.be/pt1t/biostar/bios7.jpg
http://users.skynet.be/pt1t/biostar/bios8.jpg
http://users.skynet.be/pt1t/biostar/bios9.jpg
http://users.skynet.be/pt1t/biostar/bios10.jpg
http://users.skynet.be/pt1t/biostar/bios11.jpg
http://users.skynet.be/pt1t/biostar/bios12.jpg
http://users.skynet.be/pt1t/biostar/bios13.jpg
I received a new bios from biostar this morning.
http://users.skynet.be/pt1t/biostar/Ip96a803.rar
E6600es Step 5
vcore 1.5v
vdimm 2.2v (bios)
Tuniq tower 120
2*1go Gskill p6400 ..HZ
antec TPII 500w
Matrox millenium II
http://valid.x86-secret.com/show_oc.php?id=109491
http://users.skynet.be/pt1t/6600es/1M_450X9.PNG
quick fsb max with X6
http://valid.x86-secret.com/show_oc.php?id=109492
http://valid.x86-secret.com/cache/109492.png
But i m always looking for good software to overclock in windows , Clockgen and setfsb dont work ...
Very nice....
Quote:
Originally Posted by pcdoc1
+ 100mhz fsb with new bios , VFSB and V NB/SB in auto.
Just need a working Clockgen
and
Vdimm mod ^^
on multi 9x, how high fsb do you feel stable to bench 3dmark and spi??
Vdimm mod is a must....:D
holy crap! This is a very very impressive board now!
try systool for overclocking
tried , :stick:Quote:
Originally Posted by vapb400
I m going to test stability and 3d this week-end , got too much work before :mad:
now i gotta have one of these too
awesome job
cant wait to see max @9x
Pt1t - nice job in testing out the board. One more choice of a possibly low priced performance oriented board. Any idea what sort of caps they are using on the board? I believe in good caps == long lasting reliable board. :)
Thanks in advance.
look like a board who got a lot of potential
1,8v on the nb is nice too , 450 fsb @ how much voltage?
somebody know where to buy online in europe?