air E66 ES meet GA-965P-DS3 "499 FSB"

Quote:

---

Originally Posted by dogsx2

Yes, it's because it's an ES chip.

PcC: Good job.:toast:

Any chance of a ss of the bios settings in M.I.T.?

---

here

http://img291.imageshack.us/img291/8936/1732copyte3.jpg
http://img291.imageshack.us/img291/6433/1737copykw0.jpg

:toast:

Thank you my friend.:)

Quote:

---

Originally Posted by PcCI2iminal

i have tryed 9x and max fsb @ 380 and i was thinking why chips with 7x like Allandale can hit 480+... L2 2mb ?imature bios?
i think the answer is the multiplier

---

So what you are saying is that the Core 2 duo chips are frequency limited (like the Athlon 64s) and It sounds like is you don't need the higher multipliers to max this out unless you want the 4mb cache?

Its good to hear this board isn't FSB limited in that case.

Let's see some 8x multipler, max FSB, shots

Quote:

---

Originally Posted by PcCI2iminal

i need better fan on my HR-01 ,with room temp @ 28C only 120x1200 rpms isn`t enough for 3.8ghz but i will try this very soon

---

Quick, send this man a GHE Delta!

So you can't lower the multiplier on a retail C2D? I allways thought you could go lower just not higher. Really nice results! It would seem to be confirmed that Gigabyte makes the best p965 board as of now.

3 DS3 coming tomorow

damn. 499. not bad, at all

Quote:

---

Originally Posted by misteroadster

Try this now :D
Sonic does :

-510FSB with 6300
-480FSB with 6400

480X8 should do the trick

---

http://img144.imageshack.us/img144/9...eembootto3.jpg

easy boot @ 410


thanks for helping

:)

also notice guys he's on 2x512 ram...

so what are you using to change the fSB in windows ? Easy tune wont even run for me.

ive installed 2 different versions. or rather the ver. on the cd and the ver. on the website.
the cd version opens and then locks my desktop like there is a message window somewhere but you cant see it. if you click anywhere you just here the beep sound like the system is trying to tell you. "hey there is a window here that needs your attention"
the website version wont even start,, it just real quick opens gui.exe in device manager and then closes.

did you have to install Easy Tune 5 when the bios was all at defaults ? or ??

Quote:

---

Originally Posted by Lestat

also notice guys he's on 2x512 ram...

so what are you using to change the fSB in windows ? Easy tune wont even run for me.

ive installed 2 different versions. or rather the ver. on the cd and the ver. on the website.
the cd version opens and then locks my desktop like there is a message window somewhere but you cant see it. if you click anywhere you just here the beep sound like the system is trying to tell you. "hey there is a window here that needs your attention"
the website version wont even start,, it just real quick opens gui.exe in device manager and then closes.

did you have to install Easy Tune 5 when the bios was all at defaults ? or ??

---

im using easy tuner and i installed it from cd

my steeps

bios at defaults ->install XP->all drives->reboot-> easy tuner 5 -> reboot-> go OC :D

Strange thing your cpu tops out at the same frequency at 7x than 8X, 3450Mhz about :fact:

i need vcore my friend :mad:

i will rebuild my water for a good run,this MB got skills

It looks like all roads lead to the same place.:( Not much difference in overall clocks but it sure makes the memory go.:D

Thanks for the hard work.:toast:

Edit: MR posted while I was typing. :(

a Vcore mod...

for this board?
this board goes up to 2 volts.
thats more then enough to kill most CPU's... even with watercooling, if you leave it too long.

Quote:

---

Originally Posted by dogsx2

It looks like all roads lead to the same place.:( Not much difference in overall clocks but it sure makes the memory go.:D

Thanks for the hard work.:toast:

Edit: MR posted while I was typing. :(

---

Dogs
its bad to hear ....

Quote:

---

a Vcore mod...

for this board?
this board goes up to 2 volts.
thats more then enough to kill most CPU's... even with watercooling, if you leave it too long.

---

plentys of good stuff in Bios

F-1 Bios

http://img147.imageshack.us/img147/2332/bios1cf0.th.jpg
http://img152.imageshack.us/img152/9366/vcorenb9.th.jpg
http://img142.imageshack.us/img142/2127/vdimmim4.th.jpg
http://img142.imageshack.us/img142/5928/vfsbkb0.th.jpg
http://img152.imageshack.us/img152/2009/vmchod1.th.jpg
http://img147.imageshack.us/img147/5861/vpciaq5.th.jpg
http://img142.imageshack.us/img142/4634/multide4.th.jpg
http://img142.imageshack.us/img142/7...setsjn4.th.jpg
http://img147.imageshack.us/img147/9112/tempsak2.th.jpg

now i got
1.3v and 45C idle
1.4v and it will pass 50C and its not a deal for me
with P5WDH i need 1.4v for 3.5ghz and with good cooling 1.48v for 3.8ghz.


its time to change cooling

8 x 500 done!!

http://img80.imageshack.us/img80/1139/1737copyft5.jpg
http://img53.imageshack.us/img53/201...3conroefb7.jpg

http://valid.x86-secret.com/show_oc?id=106847

cpu cooler : 940D HS + Tornado 80mm
vcore : 1.5v

Very, very good :fact:

Now put it under "better" cooling and see if you can get 9*500mhz stable ;)
Maybe a little dice on the northbridge helps :D

You are an incredible overclocker :toast:

That 8x500 just sealed the deal, I'm getting a DS3

Woohoo!!!!

Friggin' awesome. I'm fondling my empty DS3 right now waiting for the 27th!

Looks like I should've gone with the E6400 instead of the E6600 though. Hmmm. I wonder how much that 4MB cache will help? Prolly not much?

I mean, if money was not a concern, would you rather have a E6400 or a E6600?

Oh come on now, if moneys not a concern get a x6800 lol. Of course the E6600 would be better. Nice results btw!

what is the chipset voltage for these insane 500FSB readings? stock?

hey how u enable the MCH temperature and other tmeperature reading??? i only have system temp and cpu tmep !!

ya wow 8x500, i hope retail will OC jsut as good :(

Me 2!