phase change gallery

Hi all



Mr.Icee what do you use for anti freeze at those temps, might try and build 1 myself, though im getting my Prometeia today got a brand new 1 for 350 dollars :D


Menty

Mentaly:)

I use a 50/50 mix of Havoline Dex Cool and distilled water. The Dex Cool is a special forulation here in the states that is an extended life formula, and contains the necessary long life additives to prevent electrolysis between dissimilar metals in the cooling system.

Randi:D

Quote:

---

Originally posted by Mentaly
Hi all



Mr.Icee what do you use for anti freeze at those temps, might try and build 1 myself, though im getting my Prometeia today got a brand new 1 for 350 dollars :D


Menty

---

Any chance giving out the secret on that price??

Mac

http://www.oasis.ie/specs/RemoteChil...ckageRLF1S.pdf

Look at that, i might be able to get one.
I talked to the guy at that firm and there is a remote version with a thermostat that allows you to cool the water down to around 1 or 2 degrees c. I guess that is tweakable if needed.
We have around 100 of them here at my work and they are dead quiet!!
Not even a whisper.
I guess all i have to add is Inlet and outlet and a pump, right?


Mac

Hi Mackanz


Yea shure the secret is some firm bought 2 and only needed 1, and they were offered a little price so i offeréd just a little more
and i got it with a P4 kit and shipping fees so end price for me 400 Dollars. :) didnt include shipping before sry, but still a very fair price I think.

Edit : I`m gonna take some pics when i have set up with digicam, hope someone can host them, so U can see it in action, and hopefully my 1600+ will do a little more than 167x12 @1.92 Vcore :D

Menty

well here is my home made unit.

-40 degrees no load i am just in the testing phase


edit by moderator
:( Pic's lost in a database crash,sorry for the inconvenience.please repost

MY EVAPORATOR


edit by moderator
:( Pic's lost in a database crash,sorry for the inconvenience.please repost

Wow, these things are cool!!
Nice setups guys...
Really need to get me one too, a few more months i guess :)

hey fredperry, nice to see u here :)

Quote:

---

Originally posted by ctgilles
hey fredperry, nice to see u here :)

---

Hi, Gilles, good to see you overhere ;)

I hope you enjoy seeing this piece of machinery just as much as I do. I love my setup as it is know.
case roxx, prometheia roxx, everything roxx

edit by moderator
:( Pic's lost in a database crash,sorry for the inconvenience.please repost

http://users.pandora.be/gamer/case.JPG

next week better pictures :)
Lian Li pc 71 with vapo.
it's changed now, stealthmodded, fans in sidepanel,....

whoa :) im painting me prometeia to match the lian li
as soon as i get a camera, ill post :)

these are mad machines pretty wicked. But cool none the less, me I am staying just with what comes in the box, hmm however I am currently building my second rig? food for thought

yes, P4 2.4Ghz (133)
ASUS P4T533
512MB RIMM4200
RADEON 9700 ;)
...

this is my babe i have been working on now for about 3 weeks

well first day of testing .so i thought what the hell get out the big peltier. 156watts at 13.8 volts.full loaded my block .didnt do bad at all.i had to adjust the freon some.caused my no load temps to go from -53.5 down to -45. but at least is keeping the block cold.i have 3 probes.one one the cold plate reading-43.3 one on the hot side of the peltier reading -7.5 on one on the block reading -27.7.not too bad so far.

to see what more check out the fourm over at

edit by moderator
:( Pic's lost in a database crash,sorry for the inconvenience.please repost

Quote:

---

Originally posted by ctgilles
i want one too
http://balbla.jpg
look, i got one now, check out tha RHEOBUS :D

---

Very nice! That must be a custom? :D

yeah, dremel rules ;)

Anyone here charging their systems with straight propane? If so.. what compressor are you using.. as in HP.. and original freon used in it..

Also.. did you have any trouble filling the system with propane? Put in any other type of additive? etc..

Does anyone here know if those cans of Johnston R-134A you get at Wal-Mart have ester oil in them? The straight cans.. the kind that you need the piercing valve on the top for..

ghetto phase change chiller :

Stage 1

Stage 2


tbc....

originally i was going to use a 226w pelt with my chiller, but after the wires snapped off for the second time while i was remounting it, i decided the straight chiller would do the job just fine. The TEC was just stressing me out anyways...
http://fuxor.freewebspace.com/vodka/skyy3.jpg
and inside...
http://fuxor.freewebspace.com/vodka/skyy4.jpg
i can get an inch of ice to form around the evaporator, fortunately this dehumidifier i found in my garage had a huge compressor.

oh yeah, system specs:

Abit KX7-R motherboard w/blue orb on chipset
AthlonXP 1600+ AROIA wk13 @ 180x10
512mb Samsung pc2700 dtl
Gainward Geforce3
Diamond Monster Fusion PCI (for the second monitor)
Sound Blaster Live! Platinum
generic NIC

2x 21" Sony G500 monitors
Canoscan N1220U scanner
Epson Stylus Photo 890
HP LaserJet 4+
Linksys 4 port router/16 port hub
500w Pioneer amp/2 KLH monster speakers with 15" woofers
M$ internet keyboard pro/intellimouse explorer 3.0
belkin nostromo n50 speedpad (awesome for FPS games)

10x Toshiba DVD-ROM drive
44x24x44 Yamaha CD-RW
60GB Maxtor HD
45GB Maxtor HD
and 2x30GB Western Digital Hard Drives

and an Antec Full Tower SX1240 Case (with a nice window in the door)

here's what my system looks like:
http://fuxor.freewebspace.com/vodka/setup1.jpg
http://fuxor.freewebspace.com/vodka/setup2.jpg
the radiator and duct at the top of the case are to be used for the separate water-cooling loop that will go to the graphics card... I'm trying to decide whether to set it up now or wait for the NV30...

:rocker: rock on :rocker:
ps: copy the links into a new window to see the pics

My prommy side pannel

edit by moderator
:( Pic's lost in a database crash,sorry for the inconvenience.please repost

I promise I will have pics of my work up very soon.. I am starting a system that is build completely in the PC case and it is a CPU/NB phase change system.. heh I've just had no digi cam and luckily the guy buying this system is sending me his ..

Some disturbenses in the distant past. :)

Apr 2001: Mr Poogle's chiller.
http://3rotor.homelinux.com/images/c...P03927_sml.JPGhttp://3rotor.homelinux.com/images/c...P03935_sml.JPGhttp://3rotor.homelinux.com/images/c...P03939_sml.JPGhttp://3rotor.homelinux.com/images/c...P03942_sml.JPG

Aug-2000 though Nov-2000 DMMD's Chiller.
http://3rotor.homelinux.com/images/c...P03298_sml.JPGhttp://3rotor.homelinux.com/images/c...P03318_sml.JPGhttp://3rotor.homelinux.com/images/c...P03320_sml.JPG
http://3rotor.homelinux.com/images/c...P03374_sml.JPGhttp://3rotor.homelinux.com/images/c...P03346_sml.JPG