6600ES humping! On Air!

Printable View

Show 100 post(s) from this thread on one page

07-02-2006, 01:10 PM
sai

Yeah FSB1333 + 27%. BTW I'll continue posting here when it gets colder. 29° room temperature is not exactly what I call an oc-friendly environment!
07-02-2006, 04:45 PM
theteamaqua

nice result

but do u have to do the pin mod to enable oc options in bios??
07-02-2006, 09:27 PM
sai

Yep. With condutive silver ink. Too lazy to solder *hehe
07-02-2006, 11:05 PM
theteamaqua

oh man thas why i bought P5W DH instead of Bad Axe ... and i heard without further vmod 370 is max or something.

any chance u gonan run this on ur DFI?? since ur sig suggest that u have DFI Infinity 975
07-03-2006, 04:33 AM
Apoptosis

Quote:

Originally Posted by eva2000

water cool baby.. water cool

E6600 @3750mhz at 1.441v = 60C load, @3809mhz at 1.488v = 61-62C load LOL

3.8GHz is a very nice overclock for a E6600 -- Congrats Eva!
07-03-2006, 08:23 AM
mursaat

Quote:

Originally Posted by sai

As I said earlier these conroes are really hot! I'm not willing to give anymore than 1,45v for 24/7 use, the HS is already hot as hell. I made it a sandwhich cooler now with one fan blowing and one fan sucking. The air coming out is so damn warm :D

I read somewhere (can't remember where, but I found it in two or three sites) that the Ninja and the Tuniq Tower 120 both performed better with only 1x120mm fan blowing. Don't ask me the physics and/or the results, but IMO it's worth the try :)

Great results BTW :clap: 23rd is soo far away :D
07-03-2006, 09:57 AM
sai

Well here I am to proof them wrong. It's about 5° colder with 2x120mm fans. (which is pretty much obvious when you think about it)
07-03-2006, 10:13 AM
theteamaqua

pics of ur air cool setup plz??
07-04-2006, 12:01 AM
mursaat

Quote:

Originally Posted by sai

Well here I am to proof them wrong. It's about 5° colder with 2x120mm fans. (which is pretty much obvious when you think about it)

Good :) Now I remember these sites said it was hotter because the rotor circle in the sucking fan didn't allow the air to flow through there, but thinking logically, it has to work better with 2 fans :D
07-04-2006, 03:28 AM
sai

1 Attachment(s)

Quote:

Originally Posted by theteamaqua

pics of ur air cool setup plz??

here you are
07-05-2006, 01:54 AM
eva2000

Quote:

Originally Posted by Apoptosis

3.8GHz is a very nice overclock for a E6600 -- Congrats Eva!

thanks..

Went for my new personal best 32M time. I think this is one of the fastest times under 3.9ghz and 4.0ghz at 1:1 ??

http://fileshosts.com/intel/Intel975...9s609ms_tn.png

Show 100 post(s) from this thread on one page