E6600 Step 5 + Intel 975XBX Installed

the bios 1304 is great
I'm dual prime @ 3600mhz, 50% OC, 1.325v, 1.395/1.725...all from bios settings :)

430fsb is usually the max with an unmodded board ?

Quote:

---

Originally Posted by Supertim0r

the bios 1304 is great
I'm dual prime @ 3600mhz, 50% OC, 1.325v, 1.395/1.725...all from bios settings :)

430fsb is usually the max with an unmodded board ?

---

with mch/fsb volts you need to max them out for 400fsb dual prime ? i'm still using default volts for mch/fsb ..

Quote:

---

Originally Posted by eva2000

with mch/fsb volts you need to max them out for 400fsb dual prime ? i'm still using default volts for mch/fsb ..

---

1.395/1.725 (I don't know if its ok for 24/7)
I'll try default tonight.

Quote:

---

Originally Posted by Supertim0r

the bios 1304 is great
I'm dual prime @ 3600mhz, 50% OC, 1.325v, 1.395/1.725...all from bios settings :)

430fsb is usually the max with an unmodded board ?

---

Did you have to do the pen mod to unlock the oc options on bios 1304 ?

Quote:

---

Originally Posted by Devious

Did you have to do the pen mod to unlock the oc options on bios 1304 ?

---

I couldn't tell, I did the pin mod (conductive ink) when I had a P4 3.0

btw, how are your temps loaded ?

with this : http://www.thecoolest.zerobrains.com...opic.php?t=137

I'm at 58-60c loaded with a TT BT + Sanyo Denki + AS5 :(

Quote:

---

Originally Posted by Supertim0r

I'm at 58-60c loaded with a TT BT + Sanyo Denki + AS5 :(

---

I thought Conroe was running cool eeek :eek:

Quote:

---

Originally Posted by Devious

Did you have to do the pen mod to unlock the oc options on bios 1304 ?

---

argh, for the last time, YES

Quote:

---

Originally Posted by Supertim0r

btw, how are your temps loaded ?

with this : http://www.thecoolest.zerobrains.com...opic.php?t=137

I'm at 58-60c loaded with a TT BT + Sanyo Denki + AS5 :(

---

How many volts are you pushing for vcore to achieve that temp? Doesn't sound right to me unless your are overvolting the hell out of it.

On a sidenote, has anyone reported odd heatspreaders on these chips (like not completely flat) similar to what happened to some of the 9xx series chips I think?

Quote:

---

Originally Posted by NoYd

How many volts are you pushing for vcore to achieve that temp? Doesn't sound right to me unless your are overvolting the hell out of it.

On a sidenote, has anyone reported odd heatspreaders on these chips (like not completely flat) similar to what happened to some of the 9xx series chips I think?

---

It's priming @ 1.35v 3.6ghz (its not in a case, open bench...)

My ihs is perfectly flat

Quote:

---

Originally Posted by freecableguy

argh, for the last time, YES

---

hey, do you think the sensor are off on the bad axe ?
60c loaded 3.6ghz 1.35v :confused:

Quote:

---

Originally Posted by Supertim0r

hey, do you think the sensor are off on the bad axe ?
60c loaded 3.6ghz 1.35v :confused:

---

they are off by 15-20C (too high)

Quote:

---

Originally Posted by freecableguy

they are off by 15-20C (too high)

---

excellent, thanks ! :banana:

http://simon.webideal.ca/Bench/3.6%20prime.JPG

My results also indicate 15-20 C too high.

Vcore readings are also off for me.

E6600 QPGE Step 5/B1 / Intel D975XBX Badaxe rev304 temperatures

Well here's some temperature readings but not sure which is right. Most badaxes owners say bios temps are +10C higher than reality.

@9x266fsb = 2400mhz stock vcore 1.242v

Room temp = 24.8C right now
Bios cpu temp = 30-31C

Windows Idle = 27C/25C for core#1/core#2 most of the time but fluctuates by +3C for both cores at times.

http://fileshosts.com/intel/Intel975...le_25C_27C.png

Windows Load (dual stressprime) = 37C/37C for core#1/core#2

click image for larger pic
http://fileshosts.com/intel/Intel975...37C_37C_tn.png

Will do oc'd temps later :)

Does 1333fsb strap really loose this much efficiency for super pi compared to 1067fsb strap ?

At 1067fsb strap with 3443mhz 9x382fsb with 2x256MB Centon @382mhz 4-4-3-15 managed 15min 41s

But now @1333fsb strap with 2x512MB OCZ PC5400 Plat XTC

@9x416fsb with ram @312mhz 3-3-3-8

http://fileshosts.com/intel/Intel975..._single_tn.png

@9x416fsb with ram @416mhz 4-4-4-15

http://fileshosts.com/intel/Intel975..._single_tn.png

@9x416fsb with ram @416mhz 4-4-4-12

http://fileshosts.com/intel/Intel975..._single_tn.png


@9x416fsb with ram @416mhz 4-4-4-10

http://fileshosts.com/intel/Intel975..._single_tn.png

@9x416fsb with ram @416mhz 4-4-4-8

http://fileshosts.com/intel/Intel975..._single_tn.png

@9x416fsb with ram @416mhz 4-4-4-4

http://fileshosts.com/intel/Intel975..._single_tn.png

@9x423fsb with ram @423mhz 4-4-4-8

http://fileshosts.com/intel/Intel975..._single_tn.png

Yeah i need faster memory for better times!
vcore = 1.441v
mch = 1.725v
fsb bolt = 1.395v
vdimm = 2.2v

First single vs dual Super Pi 32M run

@3809Mhz (9x423fsb) and ram @423mhz 4-4-4-8

vcore = 1.441v
mch = 1.725v
fsb bolt = 1.395v
vdimm = 2.2v

Single 32M = 15min 05.484s

Dual 32M = 18min 10.734s / 18min 09.438s

Nice job.

Is that a new bracket for your storm? Or does the original one work w/ conroe ?

conroe = LGA775 so same mounting as other LGA775 cpus :D

thanks for dual

Here's another dual 32M, nice setup eva :toast:

http://img.photobucket.com/albums/v31/canny/DualPI.jpg

I'm testing about the same setup at 3.66 GHz.

Storm fits fine with no trouble.

Superpi 1x: 13:38.27 818.27 sec
Superpi 2x: 18:45.26 1125.26 sec + 18:45.26 1125.26 sec

Under Linux 64 bits, so I lack CPUz. I honestly don't know what RAM speed I am on :(

nice results can not wait

Dual Stressprime 2004 idle and load temps:

Room ambient: 25.3C
CPU idle: 33C/34C
CPU load: 59-60C for both cores

@9x416fsb = 3750Mhz

vcore = 1.441v
mch = 1.725v
fsb = 1.395
vdimm = 2.2v

http://fileshosts.com/intel/Intel975...33C_34C_tn.jpg

http://fileshosts.com/intel/Intel975..._load_1_tn.png

nice work eva