Printable View
I like to verify that newegg has the CCBBE 0617FPMW is in stock and it's being shipped so anybody interested, get it from newegg. mine was send from the New Jersey warehouse :)
Will be back later with some OC shots..
OH, the opteron 170 0551 blows.. I'm selling it and will probably be taking of the IHS off this new opty 165
good luck selling the 0551 :p:Quote:
Originally Posted by likewhoa
rofl thanks i can use all the luck in the world trying to get this rid of this crappy 0551Quote:
Originally Posted by blazin-asian
I got an offer of $275 can you believe that :eek: ? umm gonna try for $300, lol
w00t,.. Just hit 3060x9@1.475+112% stable on this beast of a chip.. :)
will post shots soon, as my 7900gtx seems to be defected because it's giving me artifacts in 3dmark. :(
you hit what?
My 0617 does 2600Mhz at 1.31V and 2800Mhz at 1.4V. Seems like 2800Mhz is the sweet spot for me.
looks like this 0617 is even better than the 0609 CCB1E i have. it needs 1.55V to do 3 Ghz and it runs sooooooo hot.
3060 at 360x9@1.475 plus 113% but load temps were a little to high for my taste.. at 50-55CQuote:
Originally Posted by itznfb
so now i'm gonna stay at 334x9@1.350 plus 113% load is at 45-50C now :cool:
ccbbe is the 165 stepping to get :D:Quote:
Originally Posted by kool168
3060 at 360x9 doesn't make any sense.
360x9 would be like 3240mhz
whoops ma bad.. it was actually 350 that i hit before but didn't like because of temps..Quote:
Originally Posted by itznfb
3060 would be 340x9
yea that was my stable but crazy temp readings like 50-57C so i down it to 334x9 1.4+110% = 3006 :)Quote:
Originally Posted by itznfb
you're right it was 340 that i hit at 3060 dunno must to been really tired but 334 is my sweet spot anyways..
well i found my sweet spot on this chip "i think", currently running at 332x9 1.375v + 113% in bios,.. I'm staying at this for now until i'm able to put more time and lower temps for 3Ghz which is my goal, but i would like temps to stay at 45-50C at those speeds,.. I can hit 340x9 1.475v + 126% but those temps are a little to high and prime fails at 4 hours :(, I need to strip this baby naked and add some liquid silver because this artic silver is not cutting it and I'm on WC btw ambient temps are 20-30C. Anyways this chip is the best opteron so far, kills any opteron 170 which won't even do 2.8 at stock voltage. when this baby is doing 2987.64 at 1.48v :)
I can smell a stable 3Ghz around the corner
CPU-Z
http://valid.x86-secret.com/show_oc.php?id=107175
Screenie :)
http://weboperative.com/gallery/Misc...113percent.PNG
0617 was a great week for these chips :)
Happy Ricing
.: IDLE/LOAD TEMPS :.
Cpu Pwmic Chipset
27C/47C 30C/37C 35C/40C
my evercool chipset fan should arrive soon..
umm,.. would lowering my priority in prime consider taking a shortcut or what?
since running at high priority would equal a better stress on your cpu then at normal priority, why should prime run at any less? If a lowered priority in prime makes no difference and since normal Prime95 runs it at priority 1 by default unless you enter the advanced menu and manually change it, then i can see 3.0Ghz sooner than i thought :)
I've only been paying attention to priority in SP2004 since it's like right in your face, lol so i figure i ask the question and see what others think.
EDIT:
I guess a low priority does make a difference since i was able to up FSB 1Mhz to 333 and prime is 8 hours+ strong.. just 1Mhz more and I will break 3Ghz!
so far lowering the prime priority let me get pass 333x9 when before it couldn't because of it be set at priority 9, so it does make a difference as suspected..
here is my highest stable screenie so far..
333x9 1.375v + 113%
http://weboperative.com/gallery/Misc...113percent.PNG
tonight I'll try to stabilize the big 3.0, man I love this chip.
CPU-Z
http://valid.x86-secret.com/show_oc.php?id=107307
not bad at all :)
The darkside complemented AMD :p:
w00t the force is with me :)
my 0617 does 2.9 @ 1.475 and 2.95 @ 1.55
3G seems out of reach for now.
I got 3 Ghz out of mine @ 1.53vcore,but I'm not sure if it counts as I only tested it for an hour :stick: for daily use I'm still @ 2906mhz 1.392vcore. http://img143.imageshack.us/img143/8...53vcorezk2.jpg
nemesis would you agree that this opty 165 kills your opty 170 ccbbe?
For now I'd have to say yes. My max prime stable oc on default vcore is 2835 for the 165 ccbbe 0617 & 2800 on the 170 ccbbe 0610. The 170 did 2850 @1.392 where as the 165 did 2906. I never really tested how far the 170 would go because I switched over to the DFI Expert board that weekend and it took a long time to learn how to tweak the memory settings in order to overclock. I've now grabbed a set of G. Skill 2Gb HZ's that don't like using the 9/10 or 5/6 divider with the 165 so I may throw it back in. I honestly don't think it's going to overclock better than the 165 0617 though considering how it scaled.Quote:
Originally Posted by likewhoa
so I finally stabilized my opty 165 at 3006Mhz and it's load temps avg 45-50C at 1.52v :)
I think I got my temps down pretty well considering this is a 67% OC. I will keep pushing it some more..
http://weboperative.com/gallery/Misc...113percent.PNG
and my CPU-Z validation link
http://valid.x86-secret.com/show_oc.php?id=107567
This opty has lots of potential,.. need to get a thermal electric block on it to find that out :)
334x5-1.375+113%
Well i took a gamble and made a purchase at newegg, I believe another one CCBBE stepping will be at my door soon, hopefully the 0617 but probably could be the 0610, eitherway it's a hit if i get any of those.
:)
Wow, still dropping $$$$ on optys. I'm selling half my 939 platforms andusing the $$$ to fund a conroe system.Quote:
Originally Posted by likewhoa