AM2 602MHz/DDR1204 Corsair PC8500 & ASUS M2N32-SLI

Printable View

Show 100 post(s) from this thread on one page

06-04-2006, 05:24 AM
s7e9h3n

Quote:

Originally Posted by K404

IMHO thats a damn good time at 3350MHz :D But then...I aint much of an overclocker :-p

Hehehe...look what I just dug up :p: But not only is that a good time @ 3350, the fact that Kinc did it on AIR is what impresses me the most :clap:

http://cryo-laboratory.com/upload/us...5/13x2601m.jpg
06-04-2006, 05:38 AM
DStealth

Quote:

Originally Posted by funkflix

Great clocks! :toast:

Is the 3009MHz run an optimized one? I mean for SuperPi.

I don't think so:) Great mem.performance, but it seems no performance advantage over 265-275 2-2-2-5 1T ram:( When I compare these results with mine 2x1 gb value rams with Sammy UCCCs there is only 0.6-0.7 sec. difference @ 272 3-4-3-5 1T:( Not a big improvement from 272 to 600 mhz IMO.
06-04-2006, 05:39 AM
K404

Quote:

Originally Posted by s7e9h3n

Hehehe...look what I just dug up :p: But not only is that a good time @ 3350, the fact that Kinc did it on AIR is what impresses me the most :clap:

I can see whre part of the boost is coming from with the x13 multi and tighter rrd/wtr timings, but DAMN I really gotta get looking for more tweaks :slobber:

:D More inspiration for me to try and raise my game :)
06-04-2006, 05:56 AM
Kinc

Quote:

Originally Posted by funkflix

Great clocks! :toast:

Is the 3009MHz run an optimized one? I mean for SuperPi.

No not at all. The win install of winxp is optimized for 3d. I aint much for spi :)

Quote:

Originally Posted by DStealth

I don't think so:) Great mem.performance, but it seems no performance advantage over 265-275 2-2-2-5 1T ram:( When I compare these results with mine 2x1 gb value rams with Sammy UCCCs there is only 0.6-0.7 sec. difference @ 272 3-4-3-5 1T:( Not a big improvement from 272 to 600 mhz IMO.

It seems AM2 cant use the bandwidth available in spi. In 3D I see a really huge increse in perfomence.

Quote:

Originally Posted by s7e9h3n

Hehehe...look what I just dug up :p: But not only is that a good time @ 3350, the fact that Kinc did it on AIR is what impresses me the most :clap:

I love air cooling. It took me 2 hours get the system stable enough to complete 1M over 3300MHz. I almost had it through at 3399MHz. But when the temp outside started to climb so I went to bed :)
06-04-2006, 06:02 AM
largon

3355MHz with an aircooled dualcore!
:wierd:

Everest latency?
06-04-2006, 06:33 AM
k|ngp|n

Nice PC8500 Kinc and real nice air clocks :toast:
Perf. gains are much more present in 3d IMO too.
06-04-2006, 08:36 AM
Zeus

That aircooled system has got to go over 50K in 3dmark 01!! :slobber:
06-04-2006, 08:55 AM
hicookie

kinc,i tested 3 fx62, heavy coldbug,
fsb limit under (250),and loosing all mem timing.
to bad,
setup my rig.
Fx62 1.4V 3G,ddr2-1200,cl4448 2.5
7900gtx sli mod. 860/930 , of 03 only scores 44K

does someone could tell me , gpu and ddr3 of vga safe voltage,i will put those 7900gtx on ln2 or di.
06-04-2006, 09:13 AM
perkam

Congrats Kinc, Nice to see you back in the game :)

Long time eh? :)

Though I second the request for some sandra mem benchies :D

Perkam
06-04-2006, 09:41 AM
Zeus

Quote:

Originally Posted by hicookie

does someone could tell me , gpu and ddr3 of vga safe voltage,i will put those 7900gtx on ln2 or di.

For GPU i'd say 1.55V under DI 1.65-1.7V for the mem, don't go over 2.25V
06-04-2006, 09:50 AM
OPPAINTER

Nice clocks Kinc, on both the CPU and the memory.:toast:

You should be able to nail some really high Sandra, let's see some:D

OPP
06-04-2006, 09:54 AM
OPPAINTER

Quote:

Originally Posted by hicookie

does someone could tell me , gpu and ddr3 of vga safe voltage,i will put those 7900gtx on ln2 or di.

For the core voltage you can probably do 1.85V on LN2.
I think KingPin uses 1.81V or so, but I'm not sure.

I have used around 1.81 on my cards at -80C. But I usually run them at around 1.78V

OPP
06-04-2006, 09:55 AM
OPPAINTER

Quote:

Originally Posted by Willis

*digs about info MSI 7900GTX cards :stick: *

any luck?:D

I was told week4 of this month.

OPP
06-04-2006, 09:58 AM
hicookie

thanks,opp.

will try later, my sli-pots will done tommorrow,
there is pity, my fx62 just can do 3.2G stable on air.and heavy coldbug.
06-04-2006, 10:29 AM
DeMagH

how does that compare to conroe average overclocking in 3d applications away from superPi?!
06-04-2006, 10:53 AM
Zeus

Quote:

Originally Posted by OPPAINTER

For the core voltage you can probably do 1.85V on LN2.
I think KingPin uses 1.81V or so, but I'm not sure.

I have used around 1.81 on my cards at -80C. But I usually run them at around 1.78V

OPP

Lol, i thought he wanted to know some safe voltages. :D
06-04-2006, 10:57 AM
OPPAINTER

Quote:

Originally Posted by Zeus

Lol, i thought he wanted to know some safe voltages. :D

Well they are safe voltage with xtreme cooling:D My cards still run fine.

OPP
06-04-2006, 12:05 PM
s7e9h3n

Quote:

Originally Posted by Zeus

For GPU i'd say 1.55V under DI 1.65-1.7V for the mem, don't go over 2.25V

1.65-1.7 for the mem?? I thought default is ~ 2.2V? :confused:
06-04-2006, 12:07 PM
hicookie

Quote:

Originally Posted by s7e9h3n

1.65-1.7 for the mem?? I thought default is ~ 2.2V? :confused:

yup,so wierd.:rolleyes: mem is 2.15 default ? right?
06-04-2006, 12:11 PM
Gautam

lol, he means 1.65-1.7v for the CPU, and no more than 2.25v for the mem. ;)
06-04-2006, 12:16 PM
K404

Quote:

Originally Posted by Gautam

and no more than 2.25v for the mem. ;)

OOPS! :eek:
06-04-2006, 12:17 PM
s7e9h3n

Quote:

Originally Posted by Gautam

lol, he means 1.65-1.7v for the CPU, and no more than 2.25v for the mem. ;)

lol...ok. For a second there, I was afraid that running the mems @ 2.3 on this borrowed pair of gtx's was gonna result in a cooked card :p:
06-04-2006, 12:27 PM
jrw

12.5K buffered for sure.

Lets see it :D
06-04-2006, 12:29 PM
hicookie

Quote:

Originally Posted by jrw

12.5K buffered for sure.

Lets see it :D

3.2-3.3G for sure,

tested the m2n32-sli, can do 900 1T max,

4dimm(4GB) ddr2-1200 cl 4 stable ;)
06-04-2006, 12:38 PM
Kinc

Quote:

Originally Posted by k|ngp|n

Nice PC8500 Kinc and real nice air clocks :toast:
Perf. gains are much more present in 3d IMO too.

Yeah, Quad-SLI gains alot from membandwidth so AM2+FX-62 can challange conroe for the 03 and 06 nr1 spot. Got some water cooling ready to try a little higher clocks. Do not think I will end to far from 3500MHz with some ice water. In a few days I will have som nitrogen to try and reach as good as ever possible cpu clock on hight htt.

Quote:

Originally Posted by perkam

Congrats Kinc, Nice to see you back in the game :)

Long time eh? :)

Though I second the request for some sandra mem benchies :D

Perkam

Quote:

Originally Posted by OPPAINTER

Nice clocks Kinc, on both the CPU and the memory.:toast:

You should be able to nail some really high Sandra, let's see some:D

OPP

Thanks guys!

Will have som sandra scores for you as soon :)

Show 100 post(s) from this thread on one page