Printable View
Just gettin warmed up guys. Sorry it took so long...did a complete fresh install.
Anyway...we have definitely a winner on on hands here with the 1.2 NF7! I'm using an XP 2700, uncut, with 2 256 sticks of Corsair XMS 3500 obviously running dual channel.
This is my first attampt at pushing things and it's prime stable here:banana:
http://www.liquidninjas.com/mdzcpa/r...os/NF7/225.JPG
BTW...not too worried about the CPU oc...I'm going for FSB.
Just got benching...so be patient...working it up...
Whats the max voltage you can get with the new abit mobo( cpu & mem voltage)?
Thanks
does it have vdd adjustments.:)
omfg, good stuff. whats the nb and mem voltage at?
where did you order yours from? excal is sold out of them. oh man i cant wait to get one. :smileysex
Quote:
Originally posted by Shroomer
why would you want a SLK 900 it barley outperforms the 800 and is 20 bux more :(
well first off, money isnt a thang to me.
second, Its the best.
third, it can hold a 92mm fan.. whats that mean VANTEC 119CFM!
2.3 coreQuote:
Originally posted by Doctor
Whats the max voltage you can get with the new abit mobo( cpu & mem voltage)?
1.7 vdd
2.9 vdimm
Up to 1.7Quote:
Originally posted by althes
does it have vdd adjustments.:)
mem is at 2.8 so there is more to be had yet.Quote:
Originally posted by taco
omfg, good stuff. whats the nb and mem voltage at?
where did you order yours from? excal is sold out of them. oh man i cant wait to get one. :smileysex
NB is at 1.7 so that's that.
Funny thing is that the NB is very cool at 1.7 using the stock el cheapo nb hsf. A voltage mod may work out quite well.
Picked mine up at excal too.
Still workin on the next Prime stable level....
My slk800 holds a 92mm fine.;)Quote:
Originally posted by Dissolved
well first off, money isnt a thang to me.
second, Its the best.
third, it can hold a 92mm fan.. whats that mean VANTEC 119CFM!
mdzcpa- Is the VDD mod the same? I have to find me one of these babies. :D
If your vmem is set at 2.80 it looks like it may be overvolting check out the core1 value in the mbm shot. Darn that would be too bad wouldn't it :D
I'm on the left coast and mine is sitting in my office on the right coast along with a couple of sticks of Twinmos and a Sapphire 9700 pro. I'll be ordering my WC stuff tonite.
Shad living vicariously through mdzcpa.
I'm glad you guys can have a little fun with my humble OC skills. One things for sure, when some of the real OC nuts get a hold of this board, things are really gonna heat up:D
Wow...is all I have to say so far about this board. It's too early to claim anything, but so far so good. I'm outta time tonight and it's a shame cause I'm just scratching the surface here.
The only snag so far tonight, if you can even call it that, is that I cannot make it to the next FSB setting of 230mhz. If I had 1mhz increments I'm sure I could inch up a few more....but a 5mhz jump is too much. Extra vdimm did not help. The Vdimm is waaay over volting too. Not sure if it is the memory or board at this point. Either way, 225mhz stable in dual channel mode ain't nuttin to cry about:D Maybe I can get it further after some burn in:). Maybe I need some TwinMos:)
More good news on the up side....all the multipliers I've tried work for me. That includes 10, 10.5, 11, 11.5, and 12 so far. Not a single multiplier glitch. Change it and fire it right up. Works no sweat with the Tbred with untouched bridges.
Also good is the fact that I can get high fsb speeds on this 333mhz CPU without cutting the L12 bridge some folks were doing.
And the NB is uncanny cool even at max vdimm of 1.7v.
But, it's late, so i'll try some bandwidth benches and stuff tomorrow. I'll also see if I can get the CPU back up past 2.6ghz like it was on the KD7-E. I don't think it will even be problem though.
More to follow...
vdd mod uses the same 6250 ic chip like in previous versions, if only i can find my bag full of vr's i could start vmodding...i had the time to do it today too :(
umm overvolting vdimm! now there's something different from an abit board!
kick ass!
Mike, if you use SetFSB in windows you can use 1mhz increments, and burn your way up to 230mhz fsb :)
very true.. :) all my ABIT boards undervolts like mad :DQuote:
Originally posted by Ragnarok
umm overvolting vdimm! now there's something different from an abit board!
kick ass!
Mine overvolt the Vcore and the Vdimm a bit (i won't complain :) )
I may indeed give this a try tonight after work:)Quote:
Originally posted by DuraN
Mike, if you use SetFSB in windows you can use 1mhz increments, and burn your way up to 230mhz fsb :)
225 fsb stable un-modded...:slobber: :slobber: :slobber:
That's all I need to see! :D Now to try finding one in the UK...:(
If anybody finds a UK source, please post..:)
Thats my question too, why the slk900? I know the clip is aweful stiff on the 800 but not worth all the hardware of the 900.
Nice pics. Mine is on the way to Ohio, left February 18. At this point looks like Monday at the earliest for me. :rolleyes:
Ill try to bug Komplett for you UK guys since Komplett is originally Norwegian and i have emailed a guy that works in their storehouse here in Norway. In Norway i have found a retailer, so its probably on its way :)
Hey DuraN, keep us posted..:)
Does anyone know if the NF7-S uses the 5v or the 12v rail for processor vcc ?
Are there benchmark?
Sorry...ran out of time last night. I'll run some real benches tonight after work:)Quote:
Originally posted by HÂ¥percUbe
Are there benchmark?
Okkk boyz :DQuote:
Originally posted by mdzcpa
Sorry...ran out of time last night. I'll run some real benches tonight after work:)
i attend they :))
It looks like a nice board so far. :thumbsup: