+5200mhz E6850 on BIOSTAR TP35D2-A7

Printable View

Show 100 post(s) from this thread on one page

08-01-2007, 02:12 AM
Darkmaster

Thank you for response..! You are great pt1t !!

Do you know some vmod for this motherboard? Or pencil mod?
Can you set all memories timings on this mobo?

I think it will be my new motherboard for little benchmarks session :D
08-01-2007, 10:16 AM
ziddey

cool. it was the p35 variant of the board. i believe rebel's haven did a review of it among others when it first came out and ended around 500.

too many choices. awesome results
08-01-2007, 10:58 AM
berk

I'd like to see other users results.
08-04-2007, 01:09 PM
natedog420

i have one on the way so will tell ya soon what i come up with. i have an e6300 that can do 500+. i have crucial tracer pc8000s on the way to so i will post as soon as i get everything going. do you think i might be able to uninstall the 965 drivers from the tforce 965pt and install the p35 drivers and be fine?

edit: ahhhhh i hate this i had to order a 6550. i couldnt help myself so hopefully its G0 and it makes a good setup. my setup now will be for sale.
08-06-2007, 12:48 AM
Pt1t

An other Sub 10min 32M with those new E6850 Baby :)

Motherboard unmodded , and no Maxmem an other tweak :o

http://www.pt1t.net/E6850/E6850_32M_9m54.PNG

http://www.pt1t.net/E6850/config_biostar5.jpg

http://www.pt1t.net/E6850/config_biostar6.jpg

http://www.pt1t.net/E6850/config_biostar7.jpg

http://www.pt1t.net/E6850/config_biostar8.jpg

http://www.pt1t.net/E6850/config_biostar9.jpg

:D
08-06-2007, 08:21 AM
Pt1t

And Some 3D with an HD 2900xt Stock cooled.

http://www.pt1t.net/E6850/2k1_84173.PNG

http://www.pt1t.net/E6850/2k5_27516.PNG
08-06-2007, 08:27 AM
boblemagnifique

Very good Motherboard for 105€ , i think order soon :D
08-06-2007, 12:34 PM
The_Beast

nice OC :up: :up: :up:
08-06-2007, 01:22 PM
before

Great results :toast:
08-07-2007, 03:45 AM
Pt1t

and my first Pifast & Aquamark for the road :p

5200mhz, and 2900 xt @ 860/1050 (air no mod)

http://www.pt1t.net/E6850/aquamark_8...00mhz_230k.JPG

http://www.pt1t.net/E6850/Pfast_5270_17_98s.PNG
08-08-2007, 06:39 PM
natedog420

2 Attachment(s)

heres a quick boot at 500fsb. im on water and have a fan on northbridge heatsink. only been up and runnin like 15 minutes so lots more to come. i will keep you guys posted and will post more pics. im happy everything is runnin great. :D :) :up:

:toast:

edit: 520 at 1.36 vcore, nb 1.58 volts, fsb 1.35 volts, memory 2.14 volts. very happy lol. cpu z read the right vcore.
08-08-2007, 08:29 PM
jabski

looks nice. May have to pick up one of these boards :)
08-08-2007, 08:57 PM
giraffen

Holy:banana::banana::banana::banana:, That´s a nice board for about 100$
08-08-2007, 09:22 PM
Hutch

Mine arrives tomorrow! I can't wait!
08-09-2007, 01:02 AM
redratamd

Mine arrives today.
I hope for vmodds for the next week.:D
And test with mobo my cpus.
08-09-2007, 10:42 AM
natedog420

i can boot at 522fsb at 1.36 vcore and im super pi stable and a few other benchmarks i can do. but not 100% stable and i can not boot 523fsb i will keep tryin to figure it out. very nice board so far with 500fsb 100% stable at 1.34 vcore and havent tried higher for 100% stable yet but will. everybody who gets this board for 100 bucks will be very very happy. i know i am and its a joy to see high fsb:D .

:toast:

EDIT: ok my ram can go 570+ and i dropped multi to 6 but still only 522fsb boots and not 523fsb. could somebody tell me what it could be. either board or cpu wall. im hoping board but not sure. havent tried more than 1.52 vcore but im not scared to push it a lot higher.
08-09-2007, 11:42 AM
vanovich

awsome scores there .
08-09-2007, 11:50 AM
jugeen

god job! :clap:
08-09-2007, 11:53 AM
Pt1t

Retail Q6600 G0 , Water ~15°

on biostar TP35D2-A7

http://valid.x86-secret.com/show_oc.php?id=227044 (not the max , i have got the time to screen :) )
http://www.pt1t.net/Q6600/Q6600_CPUZ_480X9_wc.PNG

1M
http://www.pt1t.net/Q6600/Q6600_1M_466X9_WC.PNG

32M
http://www.pt1t.net/Q6600/Q6600_32M_466X9_Wc.PNG

:D

And max FSB of the Q6600

http://valid.x86-secret.com/show_oc.php?id=227056

http://valid.x86-secret.com/cache/227056.png
08-09-2007, 12:07 PM
fireice2

wow!! that's a really nice quad you got there mate. :D
08-09-2007, 12:08 PM
Pt1t

Quote:

Originally Posted by fireice2

wow!! that's a really nice quad you got there mate. :D

-->cascade tomorow morning, and i hope it will take +50mhz fsb :D
08-09-2007, 12:55 PM
Viss

Good job seems you found yourself a good one neighbour.
08-10-2007, 10:21 PM
dogsx2

Nice board you have. I almost just bought one but seem like a few lately have had some problems with them. Would like to see a few more results on this mb from different guys here.

Any air results? Thanks:up:
08-10-2007, 11:01 PM
alpha0ne

Yet another Biostar board that is great but not for sale in AU :( :down:
08-11-2007, 12:10 AM
Solarfall

Quote:

Originally Posted by Pt1t

-->cascade tomorow morning, and i hope it will take +50mhz fsb :D

i eagerly wait for the results.. from the cascade run.

Show 100 post(s) from this thread on one page