Raven: Could you post some pic's? I'm still strugleing with it :/
Tonic: hi there ;]
Printable View
Raven: Could you post some pic's? I'm still strugleing with it :/
Tonic: hi there ;]
Hi Tonic!
I must send Lancer his cooling so it will be just cold water for now, and maybe 404a cooler later, because i dont have much time now.
Pic for you cahe
http://members.lycos.co.uk/lukaszkras/mx460.JPG
Wooohaa :-). Thanks a lot! It seems that I've managed to find vmem measuring point quite well :-).
I just wonder why this crazy mem isn't able to overclock any more... shame on you samsung!
One more thing: Decreasing resistance is goint to rise voltage?
Yes, decreasing resistance is goint to rise voltage.
Mem isnt able to more oc because it have wrong timings i think.
Maybe flashing bios from mx that have TSOP memory will help but i'm not sure about it.
Could use rabit-like tool, eh? I didn't see anything like it for nvidia's cards.
I think increasing vddq could be helpful.
http://service.futuremark.com/compare?2k1=7970076
and only 64kb cache, i will test it with barton on friday.
Hehe... i'm getting 9360 without any mods at 375/700 :P
And I'm bringing up WC for my P4 ;P
I accept this chalange:D
10 beers for winner? :bounces:
That's not fair :-) You've got FC.
But... I'll think about it ;P
I will use only watercooler, come on, are you scared or sth?
No. Not a bit. But I'm afraid that you won't post your new ideas about mem tweaking and stuff, because a kind of a competition is going to emerge. I don't feel very confident if it's about electronics, soldering and this kind of things, so...Quote:
Originally posted by RaVeN155
I will use only watercooler, come on, are you scared or sth?
I've got one more question. When you rise vmem - does memory produce noticible more amount of heat?
Yes, mem are heating more. And i wont do any other vmods, i am runing 2,1v/2,8v and this is max, I unsolder my vmem mod after 5 minuts of using it. Only one idea that i now have is gpu lapping and better cooling (artifacts on 480mhz).
Let's make it a friendly challange :P. I'm not gonna risk loosing any amount of beer (it's precious to me :P)
Hey Rav, aren't you too young to drink beers? :stick: ;)
I'm surprised of yours results, I've seen around little overlocked
3Ti with ~10k 3d2k1, so you have my greetings.. :toast:
Also I'm wondering when you all will break 10k barrier :cool:
10k barrier is going to fall as soon as i'm gonna do this damn vmods :P.
Raven: I'm sure you've done some adjustments to the measuring points, so they are now easier to use. Can you post some pics + desc.?
http://service.futuremark.com/compare?2k1=7991955
Anyone got some faster bga chips? :D
I dont solder any wires to measuring voltage because i dont need them ;)
Damn nice score :-). Congrats...
I've already made my vmods but still can't put this fu$#*( WC thing together :P
More news soon
cahe I saw your PM just now.
this is mem mod:
http://nilusweb.altervista.org/mx440/mx440_vmem.jpg
use a 10k pot and set it @ 10k ohm before turn the PC on. here is the trimmer, and the black wire you see is soldered on the positive of the capacitor to read vmem:
http://nilusweb.altervista.org/mx440/vmemmod.jpg
this is vgpu mod... always 10k pot
http://nilusweb.altervista.org/mx440/vgpumod.jpg
i used the ground of the fan connector... now i'll check if i can find a photo of the back of the videocard to let you see where to solder the wire for the gpu - mod.
Oh, i forgot: in the last photo u can see a red wire soldered on the positive of the capacitor: there u can read v gpu.
Thx NiLus, but I've seen those pic's already. I'd be plesed if you just make this mods in ms paint using our scanned graphic cards ;P.
vGPU u can do it in raven way.
For vmem mod is the same... you can do it as i did or as raven did. In my photo you can see the two black wire-rapping wires solderes on the smd resistor. Use the pot as usual (the pin in the middle and one of the others as raven showed u).
The problem is that vmem mod doesn't work for me either :(.Quote:
Originally posted by NiLUS
vGPU u can do it in raven way.
For vmem mod is the same... you can do it as i did or as raven did. In my photo you can see the two black wire-rapping wires solderes on the smd resistor. Use the pot as usual (the pin in the middle and one of the others as raven showed u).
Where do you read vmem? Use the capacitor i told you.Quote:
Originally posted by cahe
The problem is that vmem mod doesn't work for me either :(.