Printable View
thank you all :toast:
kyosen: I'll do some 8M pi this afternoon ;)
angru: for sure, I'll do it, I've just downloaded the rar file, it's on my bench list for today
I'm currently reinstalling my OS, in order to make the crossfire work properly in 3DMark 05/06, as soon as it woks fine, I turn the cascade on :D
Good job TYROU:toast:
its look very pretty cuz I love CORSAIR :p:
Congratz! :toast:
Hehe nice to see benches from this side of the Atlantic. I can see them updated at reasonable hours :D
Nice man !
A pity the CPu score is still a little short of hipro's one .... but keep trying ! It'll happen someday =D
That just... SICK :banana:
About the fsb wall though, there is a good chance the fsb is not the problem. It's quite normal behaviour for Dothans (so probably even more for Yonah due to being dual-core) that the difference between benchable (quite stable) and screenshot-stable is only very small.
So did you try a lower multiplier to prove or disprove this?
And once again congrats to your amazing result, you are a lucky man and you did a very good job with the chip ;)
the way it's meant to be clocked:D
Fantastic clocks, Tyrou, and nice T-Shirt you got ;)
You are doing a great job.
lol, awesome new wr!
Very good mate :)
Congratz !!!
that would be nice to see......must have been an OCd Merom :)Quote:
Originally Posted by s7e9h3n
WOW beatiful rusult !! nice nice nice nice
thanks :toast:
Ati really sucks, sorry macci to say that, but their drivers are just a huge piece of crap. No way to bench 3D05/06 today... Reinstalled Windows 6 times, tried WP Sp2 and 2K3, same bugs...
So, I gave up for today, and went back to 2D action, we'll begin with a cinebench, then i'll publish some nice Pi scores :)
http://www.tyrou.net/screens/1020.PNG
nice with cinebench =)
I'm curious, how is the time at 3.0-3.1Ghz? =)
very very nice.
T2600 @ 295fsb , great !
how's the chips goes with normal AIR COOling @ 20c ambient ?
277fsb stable ?
thanks :)
aircooled, it goes up to 266MHz, 284Mhz under a single stage
and now, let's go for some SuperPi ! :
1M below 16s :D :
http://www.tyrou.net/screens/15969-1.png
2M :
http://www.tyrou.net/screens/40063-2.png
4M :
http://www.tyrou.net/screens/128515-4.png
8M :
http://www.tyrou.net/screens/310766-8.png
16M :
http://www.tyrou.net/screens/656953-16.png
No SPi 32M -> my garage's breaker turned out all the power during the end of the run, quite annoying, but i'll be back benching as soon as possible :)
Don't mind the "lower" frequency on several runs, that's cause I prefered to be sure it is 100% stable fot those long benchies, no problem redoing tham at 3837 !
wow...nice.Quote:
Originally Posted by Tyrou
wondering if my lovely T2400 can break 300fsb with ur cascade :D
auto vcore, 276fsb pi_32m stable on Air, room 20c :p:
http://vic.expreview.com/attachment/276_11+pi_32m.jpg
come in France with your cpu :D I'm sure it'll be cheaper for you to come in First Class than to send the cascade :toast:
Quote:
Originally Posted by Tyrou
:p: i wish i can fly to france, it's a very nice place.
I'll try it under DI first.
btw: which bios you are using ?
I live close to the beach, and summer is coming, right time to come :D
i'm using the original bios, 1.02 i think
great results tyrou
very very nice
Félicitez
now i can laugh at the 4kw powermachine's :DQuote:
Originally Posted by Tyrou
you can't run crossfire and 3D? pff what a pity:mad:
Congrats Tyrou for your world-first 15s modPI 1M:clap: :clap: :clap: :toast:
Sorry for the delayed response as I was out of the net past 3 days:(
Quote:
Originally Posted by Tyrou
:eek: 1.02 ?
I cannot even boot in Windows when use 1.02
and so do 1.03.
The most stable version I think is the 1.0 @.@
but...someone says it has a coldbug and 1.03c has fixed the problem :(
Tyrou, your cpu still hasn't seen it's limit yet, because your 8M speed is exactly the same of your 1M speed.
Once the fsb-bug is gone (hopefully ever !), you'll probably be able to bench at 3.9, maybe even 4Ghz.
thanks a lot for the kind words :)
i'll try the 1.03 bios, maybe it'll help with my CF issues...
Nice SPi scores! With some tweaking and you will take Kyosens WR's!
Good luck with the CF thingie.
I can't imagine what you could do with that x1900 crossfire once you get clocks like mickeymouses or kincs.. I am sure you will do much more than 21k and easily beat hipros 56k record :fact:
1.03c? Isnt 1.03 beta Merom support latest bios or what is c?Quote:
Originally Posted by VictorWang
heard that, there are 1.03B and 1.03C , two 1.03Quote:
Originally Posted by kiwi
Heh, heh, heh.........This is just PERFECT.......:D :toast:
Hipro :woot:
Thanks a lot, I hope you'll have a new aopen quickly, I'm sure the day you have one, the fsb bug will be gone :D
I'll retry today to make the CF setup work properly, in fact, I don't have any idea of what's happening, the issue is the following :
- happens overclocked or not (cpu and gpu)
- same thing with catalyst 6.2 /6.3 /6.4, all WHQL, no betas here
- no way to make CF work under Windows XP, as soon as I install the ati drivers with both cards plugged (and don't even enable the CF), the system runs slower than if I've disabled the L2 cache :(
- with W2K3, everything is OK... until the flying boat test (both in 3D05 and 3D06), the image looks buggy, it lags sometimes, artifacts... and the next test works fine... so I don't have any idea of what's happening. This bugs only appear when crossfire is activated, if I do it with onyl one card, it's fine (with one or the other)
I'm pretty sure it's not a hardware problem, and beyond that, I've got no idea, I keep trying everything I can to make it work, but for now, it's a no-go :(
link?Quote:
Originally Posted by VictorWang
Are there any numbers for actual wattage put out by these Yonahs (overclocked)? :confused:Quote:
Originally Posted by Tyrou
Amazing WR, BTW. :toast:
no idea, but it must be somewhere around the 60w range :D
Did you try installing with a single card, disable Write Combining, re-boot and then install slave card trick?Quote:
Originally Posted by Tyrou
yep, sure :(
Damn, these cpus sure look sweet, cant wait to put one under my storm...
I just have one question (beings im noob to pentiums and all that)
I know that ddr2 with their looser timings make up for it in their overall speeds..
But what would say ddr 270 - 280 2-2-2 be like if this cpu had some?
Or is it already been established in the ddr with 4-4-4-? @ 600?
ddr is beaten by ddr2 now, we can run 400MHz 3-2-2-2, that's a lot faster than 280 2-2-2-2, if you can rise the memory speed, things are still going better for ddr2, 500MHz 4-3-2-2 is even faster !=
54K was single card or CF? If your saying it's slower in CF than single thats what I found out in '01 also but obviously there is a way. I know AI disabled is faster in '01 particularly Nature with CF, but you must have it on Advanced for single card.Quote:
Originally Posted by Tyrou
It does show as enabled in CCC right?
It was with CF, and AI on "advanced".
Does anyone have saved the Vcca mod pic from kyosen, the image link in the thread is broken, and I'd like to do that mod :)
OK you must try disabled ;)
I will, for sure !
For now, I've unmonted the cascade evap from the m/b, I'll do things in this order :
- finding out the cause of my CF bugs with 3D05/06
- modding my m/b for the Tcore and Vcca
- back to the benches !
congrats Tyrou - your doing great:D
The T core mod worked well for me. Be careful when you solder the wire to that outside leg of the chip. I got solder between the first two legs. Then when I was cleaning it out, I took too much solder off and the leg came loose. It all worked out good for me. it just took extra time.Cut the trace closer to the leg of the chip.
Take some pics of the vcca mod if you can.
BTW - That is hot glue on the wires.
What temp. in bios after the mod?Quote:
Originally Posted by runmc
thanks runmc
a friend who is quite skilled with SMDs will do the mod for me, I'm too jiggy to do that by myself :D
we'll not do exactly the same mod, but it will still feed the IC with 0.7v :)
Great scores, congrats! :)
:toast:
Yonah T2400retail/Aopen i975xa-YDG
Corsair PC8000UL/Zalman 9500
Ambiet=24c/WD740GD
Hihger fsb really good for benching :p:
http://vic.expreview.com/attachment/...2-8+pi_32m.jpg
very nice :woot:
If 300fsb benchable... maybe break 16min :eek: :woot:Quote:
Originally Posted by Tyrou
Sorry, now I've fixed several my posts, and re-post it here:)Quote:
Originally Posted by Tyrou
<img src="http://222.151.144.54/c-board/file/i975Xa-YDG_Vcca_mod.jpg">
You can check my mods&results also from here...though in Japanese:
http://www.oohashi.jp/c-board/c-boar...ne;no=4333;id=
In the picture above, I had added the 100ohm-VR with original R151(20ohm),
Now I replaced them(=R151 + 100ohm-VR) with 200ohm-VR.
And this mod depends on Vio...higher Vcca needs higher Vio.
Good luck!!!;)
:banana::banana::banana::banana:!!
Thats nice!
Nice work there . :) well done
Temp read 42 in bios. Probe on evaporator read -105C After I did the mod I was able to get into the bios while chip was freezing.Quote:
Originally Posted by Dumo
gg Tyrou :D
Your Yonah with my 7900GTX EE, we could make anything... ;)
thanks for the mod kyosen :toast:
santo -> it's only a matter of time, come when you want...
I'm pleased to tell you that the CF bug is now fixed :woot: Tomorrow will be a long, long day :D
What was the problem causing the CF bug??;)
Quote:
Originally Posted by Tyrou
That's some great news :D:D
ohh yeah baby!!! show us french benchies:D
GG:D
Definately waiting for some CF results.
Catalyst drivers, and more accurately, every catalyst release until the 6.4. It now works under Windows XP, with the 6.4 :)Quote:
Originally Posted by runmc
6.2/6.3/6.4 + W2K3 : works, but 3DMark05/06 bug
6.2/6.3 + WXP : crashes the OS when the second card is plugged
6.4 + WXP : works fine.
Tyrou get up! its 8:45AM :D j/k. We want to see those scores now you've fixed CF hehe. Keep up the good job :)
//EDIT: beaten by seconds :D:D
I def wanna follow this
Its gonna be good :P
Yay man you're so close to Jason!
I won't spoil you the news... you better post results soon! :D
check out his thread in Xtreme 3D. You won't be dissapointed.
wow, great one tyrou, great chip you have there :toast:
omg, that is a cold, its mean that the cpu is very near to the evap temps :slobber:Quote:
Originally Posted by Tyrou
good stuff
Its amazing to see what these new chips are capable of doing!!!
Quote:
Originally Posted by Tyrou
i've tried 10more times yesterday , wanna enable CF on 975xa-ydg.
6.4 dd+ccc,
disable "write xxx"
everytime as I plug the 2nd card, system crash or very very slow
yep, write combination is disabled :)
I'm experiencing the same issues, crashes or very slow system :(
:toast:
Congrats!
8M next?
I had to reinstall the drivers and then it worked fine.:)Quote:
Originally Posted by VictorWang
how in the world do you get that memory clocked so high :P 491Mhz for pc5400 is insane afaik.
I've found the problem.Quote:
Originally Posted by Tyrou
Do not optimize perfomance for SYSTEM CACHE.
leave it at DEAFULT ( Programme )
CCC cannot start if we do the optimize
that's why the system becomes slower and even crash
GOOD WORK VW :)Quote:
Originally Posted by VictorWang
Hope that works for you Tyrou
I hope so and wanna see 21k5 in 05 :DQuote:
Originally Posted by ORCBEAST
Very nice Tyrou.
Keep working.......
just beaten by cal930 with almost 100Mhz under tyrou :slobber:
CAL930 just passed you...
http://www.xtremesystems.org/forums/...postcount=2165
But 15s is still very very impressive for 1m spi....:toast: :p:
You are the only 2 down there..:D
nice job Cal930 :woot:
For sure, we'll keep the fight on, as soon as I'm done with 3D, i'll come back to Pi :)
Geez...you guys need to stop :D Have you noticed how "dead" the yonah competition has been since you broke your cpu out Tyrou? :p: Time to give the rest of us some time to catch up :toast:
turn on your autocascade, we should see some action from you too :D
LOL....maybe if I get 2 setups I can run both at the same time with my auto :p:Quote:
Originally Posted by Tyrou
Quote:
Originally Posted by GoriLLakoS
yeap
old WR 15.953 @ 3837MHz mem 491 4-3-2-2
new WR 15.891 @ 3747MHz mem 480 4-3-2-4
Is that corect (mem settings) ?
Could be possible if it's 1gb vs. 2gb ;)Quote:
Originally Posted by yotomeczek
Congratz TYROU! This is really awesome!
what about 4x512 or 4x1024 ??Quote:
Originally Posted by s7e9h3n
On P4C800 I had the best performace 4x512 ...
great
Oh lordy... A Conroe got 15.937 seconds in 1M today.
15.891seconds actually, he pushed a little more. :DQuote:
Originally Posted by Starks
I'm having almost the same problems as you.Quote:
Originally Posted by Tyrou
I'm having the D3DERR error (device lost) error with 6.4 and 6.3.
You have any idea how to get it working?
That can't be the fix. Mine is set for Program. Always was.Quote:
Originally Posted by VictorWang
แรงจริงๆ :eek:
lol Fugger:slap:
very nice o/c tyrou!l as usually :toast: congrats :clap:
mdr cedrixxx t'est un peut en retard :slapass:Quote:
Originally Posted by cedrixxx
now conroe roxxx :D
Tyrou tell them who gave you that great memory! ;)
I've been around these pages for years and Tyrou has become a good friend, I have a lot of respect for him, not only does he go to school full-time he still finds the time to build his systems, contribute to the forums and benchmark his projects. :woot:
Soon he'll be famous when he takes the World Cup, so don't you for get about the little people hehe. :clap:
By the by, PCPower says they'll be in touch. :fact:
Yonha, Yonha, Yonha yeah! :banana:
Hey my friend :woot:(and best supplier of course !)
I'm still in the 15.xxx, but on air, with a low-end conroe, more fun in a few days :D
http://img133.imageshack.us/img133/7532/153756fk.png
Niice...heehe...and if your supplier gets some more of that mem, LMK ;)Quote:
Originally Posted by Tyrou
is that ram good enough in your eyes ?
Corsair 5400UL rev 1.1 - Actual vddr ~2.65v - Intel BadAxe rev304 modded :D
http://img20.imageshack.us/img20/7742/51532218qm.png