And only your PC without SS ?
Printable View
And only your PC without SS ?
My right now on BOX cooler:
DFI NF4 Ultra-D, Opteron @ 2950Mhz @ 1.520V
Geil Ultra-X 196Mhz 2.2.2.5 @ 3.1V
OCZ PowerStream 520W
Sapphire X300SE
Idle: 125W
Load 184W
tnx
wow readin this thread kinda makes me sad i sold my vapo LS.....but then again maybe that means i can get me a real phase this time around.
great work man
Sry for bad pics... :D Golden froster connected to pc, compressor... All works fine (software)... I really like it :banana:
http://ld-phasechange.com/images/Picture%20139.jpg
tnx
Simply awesome work there LD.:toast:
Nice work LittleDevil! Not only do they look great but the function very well! Keep it up.
Tnx man...
Here are two painted units for XS members :)
http://ld-phasechange.com/images/production_line/8.jpg
tnx
how high are those units, in cm ?
23cm or mybe 23,5cm
tnx
very fine work.. kudos!
do u think getting 1 to the usa with 0 damage possible?
Shipping to US would probably be crazy money.
no extreme money! :banana:Quote:
Originally Posted by epox4life
Nice boxes bud! :clap:
Those compressors needs 220V for running, and shipping to US is expensive...
tnx
Is it better without faceplate...
http://www2.shrani.si/files/picture0610421.jpg
you got a brother in belgium ales;)
http://www.belgium-coolingsolutions....e/DSC09166.JPG
going to let it rest overnight and charge it. the buyer is comming over tomorrow and will bring his rig too.
grtz,
mutch better!!!!!!!!!!! faceplate would destroy the front! ;)Quote:
Originally Posted by LittleDevil
very nice jort
much better witout that awfull nuts at the side of the hole.
very impressive work. just how much would shipping to the US be? humor me.
they won't be there next time.
now be honest SSilencer, the faceplate will ruin the looks of this unit.
maybe not with other unit's but this one is just too nice:)
these unit's won't work in the US;)Quote:
Originally Posted by freecableguy
230v/50hz;)
those units look great cant whait to the $$$ and but a conore under it evap:cool: :banana:
I don't like the way you guys do the hole for the display, there is no need to see anything outside the viewable area, I prefer thhis way:
http://img54.imageshack.us/img54/8512/mctszw30gg3wh.jpg
Note that you can't see the borders of the lcd display.
Next batch of cases will be little better, but i think they are already great now... :cool:
I like all of them special this one...
http://ld-phasechange.com/images/production_line/12.jpg
tnx
P.S: Ssilencer i will need next batch of frosters...
:p:
yeah but him installing a 120v compressor is easy. (now, him testing it....hmmm)Quote:
Originally Posted by Jort
Yes, they look excllent, but I think if you cut the hole for the display using the inside measures will look better.
About the frosters, no problem, contact me by msn and I will talk with johann.
You owe me a pic of the case with a blue froster :)
You will see next batch soon and i will post pictures...:)Quote:
Yes, they look excllent, but I think if you cut the hole for the display using the inside measures will look better.
tnx
Brother is ready ;)
http://www.belgium-coolingsolutions....e/DSC09168.JPG
testing later today :)
i'll make own topic tomorrow, great cases ales!
Very nice units. I love the picture with all 5 in a row, looks very professional.
gclg2000 will like that one,its nipples are hard.:D
Very pleasant, yes indeed. I like their units a lot. A very clean work.
Report the last pic, it is :banana::banana::banana::banana:ographic!!!Quote:
Originally Posted by wdrzal
:D
:banana::banana::banana::banana:ographic? where?
(Bringing mod stick)
Looking good btw. What are the "nipples" for?
fan control, pc startup temp, etc.Quote:
Originally Posted by jinu117
@jort im at 3.1ghz @ 1.5v atm, temps level out at about -14c (loaded). think contact could be a bit better though as the evap temp never goes below -32c
If evap is -32c and reported proc -14c, you are in ballpark.Quote:
Originally Posted by dinges
Jort make your thread... :stick:
tnx
And @dinges send him a PM or something...
tnx
I thougth you where fredins or somthing since he posted in your thread.Quote:
Originally Posted by LittleDevil
Accualy not very nice to start posting pictures of your own creations trying to harvest the vesitors of little devils thread!
i thought this thread was about LD's cases, my unit has a case from LD (among with some other stuff), so i thought that would fit inhere.
its not my intention to offend anyone, so i'm sorry if i did :nono: :slapass:
LD:
very nice units you got there.. Before i saw your units i realy havent been interested in Phase units, but since i have seen your units i am sold. in some way i just MUSt get a Phase unit made by you :P
A shame that i dont have the money for one right now, but maybe it comes.
keep it on ;)
Sure it will mate ;)Quote:
Originally Posted by mikael999
Mikael999 is also from hardware-test´s fora :)
i don't want to harvest any visitors at all. damn what happend to this place?Quote:
Originally Posted by Nosfer@tu
xtreme sales market or what:(
LittleDevil
What you use fan? Characteristics and firm tell please =)
Sry Jort, Im new, So I need a bit more XS education.Quote:
Originally Posted by Jort
back in the days everyone was happy that we showed pics to our friends and fellow members.
because i used the cases of littledevil i tought i would be nice to show it here and let the people see what nice case's he has.
thats all:)
Here are some nice pics of brazed and cleaned evaps...
http://ld-phasechange.com/images/evaps/cascade/1.jpg
http://ld-phasechange.com/images/%5e...9;s%20SS/4.jpg
http://ld-phasechange.com/images/eva...ture%20022.jpg
And unit with MP14FB compressor...
http://ld-phasechange.com/images/black_MP14FB/1.jpg
http://ld-phasechange.com/images/black_MP14FB/2.jpg
tnx
Excellent job, super clean.
Looks nice i cant believe a guy living in Slovenia Ohio could turn out this quality of work :)
Lee
inside joke you had to have read a previous post.
Ahhh. Was just about to :slapass: you but then I read Inside joke .....Quote:
Originally Posted by lross78550
yes he REALLY does Quality work :D
is this system with a NL11F and r507as well? I hope you have a very very powerfull fan (150cfm+) on it or else I think the compressor will have a short lifetime. that condensor has less capacity then a stock prom condensor so discharge pressures will rise above 15bar very often.
well, definitely the units looks great, either from outside or inside the cases!!
damn these units looks soooo good. Stop tempting me to go back to phase....
Good job LittleDevil :rehab:
tnx guys :toast: :toast:
I'm using desuperheater too and high side pressure is about 13,5bar...Quote:
is this system with a NL11F and r507as well? I hope you have a very very powerfull fan (150cfm+) on it or else I think the compressor will have a short lifetime. that condensor has less capacity then a stock prom condensor so discharge pressures will rise above 15bar very often.
tnx
This unit is for PC70 lian li case (little bigger botom)... ;)
http://ld-phasechange.com/images/Metalion'SS/3.jpg
tnx
Very nice. They are clean cut, look great and they do perform! Too bad I'm not more into phase.
very clean, nice
You little devil, lol, man that's clean :eek:
Quote:
Originally Posted by LittleDevil
That's mine!:p: You know i like it very much LD, i cant wait for it:D
Pretty SS Donk.s:) :)
For christmas y want one of this amazing SS.
Regrats.
I found my new desktop backgroud!Quote:
Originally Posted by LittleDevil
Here is one finished unit with MP14FB compressor 1/2HP
http://ld-phasechange.com/images/black_MP14FB/3.jpg
http://ld-phasechange.com/images/black_MP14FB/4.jpg
http://ld-phasechange.com/images/black_MP14FB/5.jpg
tnx
your work is awesome, so clean.... keep up the good work
how much are you load testng with in post 163???
Units are ready...
http://ld-phasechange.com/images/sale/4.jpg
http://ld-phasechange.com/images/sale/5.jpg
http://ld-phasechange.com/images/sale/6.jpg
And MP14FB is ready too...
http://ld-phasechange.com/images/black_MP14FB/7.jpg
http://ld-phasechange.com/images/black_MP14FB/6.jpg
Nosfer@tu: little more than 160W, neet to tune it, because this is bench unit...
Nice dude :)Quote:
Originally Posted by LittleDevil
LittleDevil: I have sent you an email
regards
wait another week till he's back from vacation ;)
No problem! I´am wait :woot:Quote:
Originally Posted by Jort
regards
Amazing work LittleDevil !!!
Truly inspirational.
Nice work man very professional looking. And attention to detail. :D
Thanks man :)
I got a case+condensor from you (Paul Vog..... remember?) an it is GREAT! I really love it...
Love the new Black cases.....
Moc, lets see some picceys!!!!!! and some temps !!!!!!!!!!!!!
I think he's busy with finishing the unit (nl11f (from my old mach1), gfroster value, Jan/Joe_Cool evap., LittleDevil case+condenser)...dunno if he got the time to make pics and post them.Quote:
Originally Posted by Mankz_91
raiden
Quote:
Love the new Black cases.....
Thanks all :toast: ,Moc what colour of case do you have...?Quote:
I got a case+condensor from you (Paul Vog..... remember?) an it is GREAT! I really love it...
He got the stainless i bought from you :)Quote:
Originally Posted by LittleDevil
raiden
Ohh i completely forgot :stick: great, i would like to see some pics of finished unit. :)
tnx
@LittleDevil,
Keep up the good work. They look awesome!!!
pd. I want one. :)
Thanks,
Oscar
Pics are finally working...
thanks
Here are some new pics.
http://ld-phasechange.com/images/production_line/14.jpg
And some new tools ;)
http://ld-phasechange.com/images/refco/tools/6.jpg
thanks
that's an exact vacuum meter if it's microns showed on the screen :)
No, that is weight of the gas, and there is a lot more functions on that thing ;)
That is vacuum meter during vacuum-ing...
http://ld-phasechange.com/images/refco/tools/7.jpg
thanks
No, its a weighing machine (don't know the exact word...) for refrigerant.
Edit: Too slow :( ....
sweet toys you got their!!!!!!!!!
nice tools littledevil, thats got to help with making bulk units.
im quiet interested in what charge we are putting into these units, i bet its not much. ALso interesting if one unit needs much more gas compared to the next.
Nice job!
Sexy as ever Ales....as ever!
How much did you buy one?
I want a prom/vapochill too but i don't wanna spend 600+ euro
I find identical units often have very different charges. I dont think we will ever be able to simply give it a static charge and be done.Quote:
Originally Posted by kayl
1-2 grams can make a massive difference at times.
You will never geet prices on the fora it self. PM is the way to find out.Quote:
Originally Posted by barzi
600 Euro you can get a okay unit to my understanding.
Lastest unit for my friend here in Slovenia.
http://ld-phasechange.com/images/GrinTomato's_SS/2.jpg
thanks
take all the time you need,LD!this baby will be born to FLY!;)
I like your work mate cause you always give attention on detail's <----> thats the difference :toast:
Athens[2004] thanks
Unit is running, i'm using 0.028 captube here, we will see loaded temps later.
http://ld-phasechange.com/images/GrinTomato's_SS/8.jpg
Gas height in the unit.
http://ld-phasechange.com/images/GrinTomato's_SS/9.jpg
regards
The suctionline looks a bit long, compared to the placement of the cpu socket.
Mobo isn't mounted yet, it will be little higher, about 2 cm, i think suction line vill be pefrect.
regards
Tonight playing with that baby :p:
http://ld-phasechange.com/images/GrinTomato's_SS/10.jpg
regards