Those on phase no cold bug please post here

Printable View

Show 100 post(s) from this thread on one page

03-12-2006, 05:08 PM
s7e9h3n

Quote:

Originally Posted by PoL

OPB's or you got one too? :eek:

This one's mine ;)
03-12-2006, 06:28 PM
Gautam

-26C core temp according to BIOS, CABYE 0540 FPMW. No cold bug encountered as of yet on dry ice.

http://img222.imageshack.us/img222/3210/18pb.png
03-13-2006, 01:30 AM
PoL

Quote:

Originally Posted by s7e9h3n

This one's mine ;)

WOW... :slobber:
So, either your autocascade was colder than ever or you were using something different. :D
03-15-2006, 07:57 AM
lemonlime

Opteron 148 CABYE 0543FPMW

Slight cold bug on mine, have trouble passing 300MHz HTT. It got really bad when I removed the IHS and I got lots of hard locking at idle temps around -30ish, so I have since reattached it. Runs no problem at 11x291 24/7 with no bug.
03-15-2006, 02:45 PM
s7e9h3n

Quote:

Originally Posted by PoL

WOW... :slobber:
So, either your autocascade was colder than ever or you were using something different. :D

It's all cpu ;)
03-18-2006, 01:01 PM
chew*

OK guys its time consuming but i've updated up to page 4. Note's of interest as of late are some interestng X2 chips floating around with the stepping LDBFE. At this point in time there is no sign of coldbug however none that i know of have been tested beyond -35 cpu temps..........A volunteer to send one to Stephen or I for xtreme cold testing would be appreciated. Would rather it go to stephen as he can pull colder then I can with more consistent temps.

*edit* Dumo would also be a good candidate for max cold to test this cpu..........
03-18-2006, 01:09 PM
Dumo

I can test it:)
Opps, no I can't....no mobo/mem left.
03-18-2006, 01:18 PM
chew*

Quote:

Originally Posted by Dumo

I can test it:)
Opps, no I can't....no mobo/mem left.

I can arrange for a temp mobo and ram for you dumo......... sapphire RX480 and 2x256 bh-5 suit your fancy?
03-18-2006, 01:33 PM
stone_cold_Jimi

Quote:

Originally Posted by chew*

OK guys its time consuming but i've updated up to page 4. Note's of interest as of late are some interestng X2 chips floating around with the stepping LDBFE. At this point in time there is no sign of coldbug however none that i know of have been tested beyond -35 cpu temps..........A volunteer to send one to Stephen or I for xtreme cold testing would be appreciated. Would rather it go to stephen as he can pull colder then I can with more consistent temps.

*edit* Dumo would also be a good candidate for max cold to test this cpu..........

You're not talking about my preciousssss are you lol

http://xtremesystems.org/forums/show...&postcount=122
03-18-2006, 02:02 PM
s7e9h3n

Quote:

Originally Posted by stone_cold_Jimi

You're not talking about my preciousssss are you lol

http://xtremesystems.org/forums/show...&postcount=122

I'd be happy to test that for you - I'll even let you choose what type of memory you'd like it tested with :D BH5, UTTBH5, TCCD, AENON, or basically any other type I'll have access to ;)
03-18-2006, 02:21 PM
chew*

Quote:

Originally Posted by stone_cold_Jimi

You're not talking about my preciousssss are you lol

http://xtremesystems.org/forums/show...&postcount=122

actually yes that chip or another with the same code in particular :)
03-18-2006, 02:29 PM
Alec

A64 FX-55 @-17 (no coldbug)
CABCE TPMW

booted with evap at -32, no issues.
03-18-2006, 02:37 PM
s7e9h3n

Quote:

Originally Posted by Alec

A64 FX-55 @-17 (no coldbug)
CBBCE TPMW

booted with evap at -32, no issues.

CABCE - CBBCE would make it a 512K L2 FX55 :p:
03-18-2006, 02:40 PM
Alec

Quote:

Originally Posted by s7e9h3n

CABCE - CBBCE would make it a 512K L2 FX55 :p:

Gah, soz... Spent last 4 hours mounting evap so it made decent contact and am now nackered :stick:

Atleast I get better temps than I did before, though :rolleyes:

Thanks for pointing it out, I probs wouldn't have noticed it otherwise...
03-19-2006, 12:35 PM
stone_cold_Jimi

Quote:

Originally Posted by chew*

OK guys its time consuming but i've updated up to page 4. Note's of interest as of late are some interestng X2 chips floating around with the stepping LDBFE. At this point in time there is no sign of coldbug however none that i know of have been tested beyond -35 cpu temps.

I may have seen the demon this morning - I booted at 345x9 same as yesterday and left it with only Firefox running while I went and put the kettle on. System froze while idling. Ran over 3 hours of dual SP2004 while multitasking on the desktop to check, no instability whatsoever. That's a temperature feature or I'll eat my hat.

Now 3:20 into 2 Rosetta jobs, average -8C to -10C. Perhaps I'll run 310x10 later and see if it locks up tomorrow.
03-29-2006, 03:20 AM
fatty

Small update on my stepping CABCE 0522 XPMW -84 evap -50 is core I think
03-29-2006, 03:26 AM
ncc-1709

3700 sandy.

KAB3E 0548 RPCW buged @ 6*c at 3160mhz

3800 venice
LBBWE 0532 CPAW buged at any temp to 2700mhz
05-09-2006, 10:00 AM
Dogimann

Hi

Is the Opteron 165 CCB1E 0605XPMW Buged?

THX ;)
05-09-2006, 10:05 AM
Vapor

Add more data to the thread: my CCBWE 0517 MPMW 4400+ is fine for core temps down to at least -28C.
05-09-2006, 10:13 AM
Kesnel

Quote:

Originally Posted by Dogimann

Hi

Is the Opteron 165 CCB1E 0605XPMW Buged?

THX ;)

More than likely - B1 mem controllers are notorious for bugging.
05-09-2006, 11:29 AM
Leverpospade

X2 3800+ LDBHE 0601 UPMW, it can easily handle -20 C* haven't got the equipment to go colder. Gonne try some DICE soon and see how it does.
05-18-2006, 05:18 AM
TheMeatFrog

3800+ Manchester LDBHE 0601TPMW Idle -26C Load -10 Under Stock VapoLS 3.3GHz benchable @ 1.63v, 370+HTT possible
05-18-2006, 05:25 AM
Marvin

3700+ SD CAB2E bugged even at 0C.
05-20-2006, 03:40 AM
ooztuncer

Opty 146 CABYE 0540 FPMW
bugged at 275htt @ -30 celcius (cpu idle)

Phase is broken cannot test anymore...
05-20-2006, 05:35 AM
Emperor

urgent!

is 170 0550vpmw ccb1e bugged??
05-20-2006, 05:44 AM
Vapor

Yes, very.
05-20-2006, 05:44 AM
K404

yes. B1= bug
05-20-2006, 06:01 AM
Emperor

is it possible to overcome/avoid this ?
because waht i heard is that cold bugs happen at certain temps?
05-20-2006, 01:13 PM
TheMeatFrog

Opteron 148 CABYE 0543FPMW cold bugs at -20 idle at anything over 300HTT
05-20-2006, 01:26 PM
Turrican

My San Diego 3700+ KACAE 0552 FPDW is also very bugged.

I need ~+20 to get a HTT of 300 . (Ricky Tweak+2nd Heatspreder between cpu and evap. :D)

at the moment 295x11 is rockstable.
05-21-2006, 05:04 AM
PoL

I just forgot this thread... :rolleyes:
FX57 CABCE 0516WPMW #0022
-51ºC

:toast:
05-21-2006, 09:23 AM
LeSnip3R

Venice 3500+
CBBLE -22°C
no cold bug
05-21-2006, 11:08 AM
Rubiconx3

opty 170
CCBWE -26c
high htt cold bug (320 +)
07-14-2006, 12:44 AM
Jimmy007

I have Opteron 165 CCBWE 0547TPMW has it ColdBug? I've read that its good stepping for phase cooling, but maybe someone has the same stepping?
07-14-2006, 02:16 AM
K404

Anyone got info to add on the Rev.F CPUs and the new steppings?

:) Thanks

Kenny
07-14-2006, 02:40 AM
dsl

I know these are 754, but..
Sempron 3100+ LBBWE 0533BPCW
Sempron 3000+ LBBWE 0604WPAW

Both bugged below -35ºC.
08-30-2006, 04:37 PM
cuoficr

Opteron CABGE 0534SPMW No coldbug down to -30c
03-29-2007, 02:08 PM
stormcloud

Can some one give me the results of this test please?
03-29-2007, 02:14 PM
ozzimark

nice bump, but what do you mean?

and while this thread is up...

Quote:

Originally Posted by K404

Anyone got info to add on the Rev.F CPUs and the new steppings?

:) Thanks

Kenny

BV is pretty bad in my experience.. htt bugged, going below 0c on all 3 chips i've tried was basically usless. two CCBVF and one LBBVF
04-02-2007, 08:08 AM
stormcloud

Quote:

Originally Posted by ozzimark

nice bump, but what do you mean?

and while this thread is up...

BV is pretty bad in my experience.. htt bugged, going below 0c on all 3 chips i've tried was basically usless. two CCBVF and one LBBVF

There seems to be missing data from list started by Chew*. I have a KAB3E and it's not on the list. I have just bought a new phase unit and I wanted to know if or how badly:( cold bugged it is before I start. Can you help?

Cheers:)
04-02-2007, 10:24 AM
ozzimark

i don't have personal experience with one, but what i have seen of the KAB3E's, it will be bugged pretty bad. probably -20c to +10c as an approximate range, depending on how high you want to go with the HTT :doh:
04-02-2007, 11:05 AM
stormcloud

Quote:

Originally Posted by ozzimark

i don't have personal experience with one, but what i have seen of the KAB3E's, it will be bugged pretty bad. probably -20c to +10c as an approximate range, depending on how high you want to go with the HTT :doh:

Thanks for letting me know I kinda thought it would. Looks like another upgrade then :D From the data I'm still not sure what stepping I should be going for I should probably change to Core2 but I love my DFI expert too much. :p: any advice?

Cheers
04-28-2007, 05:53 PM
likewhoa

anyone know if this stepping has the coldbug caa2c from an fx55.

edit: seems the clawhammers are immune to coldbugs :)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:02 AM.

XtremeSystems