SuperPi 32M results

Printable View

Show 100 post(s) from this thread on one page

03-19-2006, 05:15 AM
stummerwinter

I saw, I have a better one then 22 min 50 s...:D

22 min 44.000 s

Opteron 146 @ 362 x 9 @ 1,64 V

OCZ VX @ 251 / 1.5-2-2-4 @ 3,60 V

But CPU allready sold...
03-19-2006, 01:01 PM
Moonman

Could you comment this result. I have no idea if it's good or bad.
Opteron 148 CABYE 0540 FPBW, cooled with R404a modded Mach 1.
http://www2.shrani.si/files/spi32m34341129.jpg
03-19-2006, 02:04 PM
dinos22

you should be under 21m with those MHz
03-19-2006, 02:04 PM
stummerwinter

I would say: :clap:
03-19-2006, 03:38 PM
boblemagnifique

http://www.membres.lycos.fr/boblemag...ual/311mhz.JPG
03-19-2006, 10:45 PM
Moonman

Thanks for your opinion guys. :)
I'll have to tweak my mem a little bit more.
03-20-2006, 02:40 AM
ncsa

Update

http://img122.imageshack.us/img122/8...3ocn5gq.th.jpg
04-05-2006, 02:10 AM
mine

18.04 32m

Yonah@3,1 air cooled

exspect 17 min coming soon
04-05-2006, 03:10 AM
Zeus

Screenshot?
04-05-2006, 04:40 AM
dinos22

Quote:

Originally Posted by Moonman

Could you comment this result. I have no idea if it's good or bad.
Opteron 148 CABYE 0540 FPBW, cooled with R404a modded Mach 1.
http://www2.shrani.si/files/spi32m34341129.jpg

moonman here is what i meant as i finally got some decent temps going for my unit

http://img159.imageshack.us/img159/6...m58485s2ev.jpg
04-05-2006, 05:52 AM
mine

1 Attachment(s)

Quote:

Originally Posted by Zeus

Screenshot?

here we go
04-05-2006, 05:59 AM
boblemagnifique

Quote:

Originally Posted by mine

here we go

Screen By coolaler !!!

Impressive :slobber:
04-05-2006, 11:32 PM
mine

16 min 32 now

16 min 32 now 32m

17 1m
04-05-2006, 11:40 PM
boblemagnifique

Quote:

Originally Posted by mine

16 min 32 now 32m

17 1m

http://www.coolaler.net/T2600CE/3408_2.gif
04-06-2006, 12:33 AM
mine

yeah impressive

http://forum.coolaler.com/showthread...7&page=2&pp=40

16..37 now
04-14-2006, 01:56 PM
Zeus

Here's my latest attemp with my new Gskill GH BH-5 memory @3,6V and watercooled Opteron 146:

http://www.xtremesystems.org/forums/...1&d=1145051356
04-26-2006, 11:45 PM
Moonman

Quote:

Originally Posted by dinos22

moonman here is what i meant as i finally got some decent temps going for my unit

http://img159.imageshack.us/img159/6...m58485s2ev.jpg

Finally I came under 21m. :)
http://img107.imageshack.us/img107/8306/spi32m1sp.jpg
04-27-2006, 02:35 AM
dinos22

Quote:

Originally Posted by Moonman

Finally I came under 21m. :)
http://img107.imageshack.us/img107/8306/spi32m1sp.jpg

congrats

very nice indeed :toast:
04-27-2006, 03:26 AM
Moonman

Thanks! :toast:

Which gas do you use in your SS?

My Mach modded with R404a can't keep it up anymore. Temps on evap are rising up to -35 under load.
04-27-2006, 03:28 AM
dinos22

R290 which will soon be R404 or similar and kyle evap ;)

i'll be going for 3.6GHz :)
04-27-2006, 10:47 AM
Moonman

3.6GHz would be very nice.
No signs of cold bug ?
04-27-2006, 12:57 PM
dinos22

335MHz HTT is my cold bug.............with lower temps that might get worse i don't know but fingers crossed it doesn't

heheh ima dosta slovenaca na ovom forumu :p:
04-27-2006, 01:02 PM
Moonman

I avstralaca isto :toast: ;)
04-27-2006, 05:07 PM
[XC] moddolicous

Quote:

Originally Posted by dinos22

335MHz HTT is my cold bug.............with lower temps that might get worse i don't know but fingers crossed it doesn't

heheh ima dosta slovenaca na ovom forumu :p:

IHS on or off?? If off, maybe give S7's (or mikeguava's or OPB's) idea thing a try. It was a peice of thicker copper to warm temperatures a bit. It worked with his godly opty.
04-27-2006, 08:22 PM
stummerwinter

Got a nice 32M with my Yonah under Air...;)

No Tweaks, no mods...;)
04-27-2006, 08:48 PM
dinos22

Quote:

Originally Posted by moddolicous

IHS on or off?? If off, maybe give S7's (or mikeguava's or OPB's) idea thing a try. It was a peice of thicker copper to warm temperatures a bit. It worked with his godly opty.

oh no need that HTT limit was from -30/-45 so i just want better temps....(lower that is).......i think this chip will manage -45/-50 idle no probs.....we'll see :)

i have an IHS BUT i polished it and reduced the thickness a little ;)......
04-28-2006, 12:46 AM
maverik-sg1

I'd love to see the result of Yonah with both cores running instances of superpi32m

These scores are truly amazing - I am in awe of the power, good job so far :)

I really want to see the scores of boths cores running together.

Mav
04-28-2006, 01:53 AM
mbass32

blimey they are all so fast , i feel lowly even though i have a nice oc on my p4 2.4c at 3.025ghz at 42m 23.516 :o(
I think when i get some money saved up im gonna upgrade bigstyle lol
04-28-2006, 05:48 AM
maverik-sg1

Here are my 32m results - completed in June 05:

http://www.extremeprometeia.com/foru...4&d=1145526348

http://www.extremeprometeia.com/foru...4&d=1145526348
04-28-2006, 07:20 AM
stummerwinter

@maverik: here my 2 x 32M

Maybe lost a few seconds because of the taskmanager, but only approx 3,5 min behind...;)

I started the 2nd one approx 5 s later then the other.

And I´m shure I lost a lot of seconds because of swaping data to the HD.
04-28-2006, 10:46 AM
maverik-sg1

@ Stummerwinter

That really is an impressive dual run score - to see it run as sweet as that is nothing short of brilliant- great job and thanks for sharing :)

What sort of temps are you experiencing fully loaded on both cores?
04-28-2006, 01:21 PM
stummerwinter

I just can give you temps for r@h, but @ 100 % load...;)

AIR: approx 50°C for both cores - with Zalman 7000B-AlCu

Water: approx 30°C for both cores

Both with AS5

But to be honest, the temps are too low, either in bios, or with this tool posted @ XS.

Right now:

29°C in WXP

33°C measured between cooler and CPU
04-28-2006, 01:39 PM
s7e9h3n

Quote:

Originally Posted by stummerwinter

I just can give you temps for r@h, but @ 100 % load...;)

AIR: approx 50°C for both cores - with Zalman 7000B-AlCu

Water: approx 30°C for both cores

Both with AS5

But to be honest, the temps are too low, either in bios, or with this tool posted @ XS.

Right now:

29°C in WXP

33°C measured between cooler and CPU

Those temps are just about right for these cpu's ;) . They output so little heat it's eerie. For example - during a 32m run on my autocascade, temps on the evap temps actually continued to drop from -75C -> -80C :eek:
04-28-2006, 02:20 PM
Gautam

Quote:

Originally Posted by stummerwinter

@maverik: here my 2 x 32M

Maybe lost a few seconds because of the taskmanager, but only approx 3,5 min behind...;)

I started the 2nd one approx 5 s later then the other.

And I´m shure I lost a lot of seconds because of swaping data to the HD.

Great score, but its the shared cache thats hurting the time bro. ;)
04-28-2006, 05:15 PM
proth

Quote:

Originally Posted by Gautam

Great score, but its the shared cache thats hurting the time bro. ;)

Definately...
04-28-2006, 05:19 PM
s7e9h3n

Quote:

Originally Posted by Gautam

Great score, but its the shared cache thats hurting the time bro. ;)

Actually, that run's a little slow for that speed ;)

http://img92.imageshack.us/img92/519...dual32m9zi.jpg
04-28-2006, 05:22 PM
Gautam

No Steven, I think you've just got a tendency to run fast for your speeds. :p

In all seriousness check out the timings. I was just explaining why his time increased by four seconds with two instances.

Why v1.4 btw? Is 1.5 indeed slower?
04-28-2006, 05:23 PM
s7e9h3n

Quote:

Originally Posted by Gautam

Why v1.4 btw? Is 1.5 indeed slower?

That's the only version I had :p:

BTW, this was a totally unoptomized run. First try @ dual 32m with the cpu. When I saw the time posted above, I just ran this to see what I'd get :D

Oh yeah - this was on air.....
04-28-2006, 10:09 PM
stummerwinter

Quote:

Originally Posted by Gautam

Great score, but its the shared cache thats hurting the time bro. ;)

I just recognized, that the HD is working much more compared to a single run. But you´re right on that.

@s7e9h3n: great times - did´t you start them at the same time?

Which HD do you use? I think, I don´t lose 2 min only by the timings.
04-29-2006, 01:44 AM
maverik-sg1

FX60 at 206x16

This is my FX60 running two instances both started within 1s of each other, clearly with the cold bug I could have a bandwidth issue, no excuses though Yonah pummels the FX60:

http://www.extremeprometeia.com/foru...7&d=1146306445
04-29-2006, 02:32 AM
s7e9h3n

Quote:

Originally Posted by stummerwinter

I just recognized, that the HD is working much more compared to a single run. But you´re right on that.

@s7e9h3n: great times - did´t you start them at the same time?

Which HD do you use? I think, I don´t lose 2 min only by the timings.

Your HD should not be working much at all during Spi runs as it's a test of floating point calculations on the cpu. There's very little/no need for the cpu's to access the HD's during the bench.

Thanks.:toast: Yup, they were started within 1 sec. of each other.

I use a 74G Raptor and you're right, you shouldn't be 2 minutes slower ;).....
04-29-2006, 04:36 AM
stummerwinter

I use a 74GB Raptor too...:rolleyes:

But especially at the 2 x 32M-run, the HD is working like hell!

At that run I didn´t tweak OS, maybe that´s the reason.

The OS is fresh, no add software (except drivers and AOpen-stuff) installed.
04-29-2006, 04:37 AM
s7e9h3n

Quote:

Originally Posted by stummerwinter

At that run I didn´t tweak OS, maybe that´s the reason.

Neither is mine ;)
04-29-2006, 02:04 PM
VulgarHandle

well, while you guys have been playin with the latest and greatest, i've been playin with my barton, i decided to put my radiator over the a/c vent :D

here's what i could squeeze out

http://x402.putfile.com/4/11818003082-thumb.jpg

my best time ever!! yay

think i could shave 14 minutes off my time with o/s mods? hahahaha
04-29-2006, 07:16 PM
Dumo

Heres...

http://img149.imageshack.us/img149/3...ron32m27yx.jpg
04-30-2006, 12:07 AM
stummerwinter

Quote:

Originally Posted by s7e9h3n

Neither is mine ;)

:confused:

So, where is my problem?

:(

@dumo: nice results for a Celeron - :woot:
04-30-2006, 12:49 AM
sierra_bound

Yonah + AOpen i975Xa-YDG (no mods) + Vapochill LS (stock)

http://img141.imageshack.us/img141/9114/32m33442od.jpg
05-02-2006, 10:48 PM
Viss

With 4x512 i get error in loop 18 32M at 3500. This is max so far.

32M
http://img.photobucket.com/albums/v6...4834751MBM.jpg
05-03-2006, 11:41 PM
s7e9h3n

Quote:

Originally Posted by stummerwinter

:confused:

So, where is my problem?

:(

I'm not sure....is it possible to do a run at the exact same speeds/mem timings as my run so it's easier to compare?
05-11-2006, 11:07 PM
before

Just hardly trying to get the fastest time for 3000MHz :p:

23m46.500s 3700+@3003MHz / 2*256Mb BH-5@250MHz 1.5-2-2-0

http://img128.imageshack.us/img128/6...g23m46s4up.jpg
05-11-2006, 11:26 PM
Dani

Quote:

Originally Posted by before

Just hardly trying to get the fastest time for 3000MHz :p:

23m46.500s 3700+@3003MHz / 2*256Mb BH-5@250MHz 1.5-2-2-0

http://img128.imageshack.us/img128/6...g23m46s4up.jpg

..im with 2x512mb, it boost little bit but not much ;)

http://koti.mbnet.fi/dani69/DFI%20nF...23m39.469s.gif
05-12-2006, 01:58 AM
before

yeah dude, I've seen yours in the low clock challenge thread. Really impressive indeed!
Which tweaks do you use? :D
05-12-2006, 07:22 AM
before

hey dani, that's closer :D

http://img355.imageshack.us/img355/9...g23m44s7oc.jpg
05-12-2006, 02:14 PM
Dani

Your CPU is OC much over 3G:fact: :D ;)
05-13-2006, 06:41 AM
before

:D right, a little bit ;)
05-17-2006, 08:50 AM
sierra_bound

Yonah + AOpen i975Xa-YDG + Vapochill LS (stock)

http://img152.imageshack.us/img152/4338/32m34597le.jpg
05-17-2006, 02:53 PM
before

Nice clock buddy... :) How high was HTT improvement with single stage?
05-17-2006, 08:43 PM
sierra_bound

Thanks. :) Single-stage cooling and Vmods were worth an extra 20MHz on FSB. Will try DICE soon.
05-17-2006, 08:47 PM
Gautam

1 Attachment(s)

Might as well play here myself. ;) Xavier, this is the dark side we're talking about, no HTT here. :D
05-17-2006, 10:38 PM
before

@sierra: that's a pretty good imporvement! Nice to know!

@gautam: oops bro; my bad... I've thought FSB while writing HTT :D Nice run indeed!
05-19-2006, 02:11 PM
before

http://img129.imageshack.us/img129/2...32m37014co.jpg
06-05-2006, 02:06 PM
Kain XS

Here is my 32M last test.

http://img349.imageshack.us/img349/7...250s0le.th.jpg
06-05-2006, 03:06 PM
Dani

My ex FX57 with EXPERT and 2x512mb BH-5, maybe some LN2 too:D

http://koti.mbnet.fi/dani69/DFI%20nF...A64Tweaker.gif
06-05-2006, 06:30 PM
coop

That's awesome Dani. Killer timings too.
06-05-2006, 06:52 PM
eva2000

here's mine with Kayl Black Frozen SS 1/4HP 8cc 404a

http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png
06-05-2006, 10:13 PM
Kain XS

Quote:

Originally Posted by eva2000

here's mine with Kayl Black Frozen SS 1/4HP 8cc 404a

http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

Whats your Tras and Idle Cycle Timer?

What CPU-Z version are you using?
06-05-2006, 10:35 PM
eva2000

click on image i posted for full screenie ;)
06-05-2006, 10:41 PM
DirkJan

my 32M venice 3000+ BT TT 2.8ghz
bh-5 twinmos 254mhz

http://members.lycos.nl/dirkjanvenem...e%202.8Ghz.JPG
06-05-2006, 11:44 PM
Kain XS

Quote:

Originally Posted by eva2000

click on image i posted for full screenie ;)

Yes, but actually its shown as Tras 0 and idle Cycle 0 too.
Is that correct?
06-05-2006, 11:51 PM
eva2000

yup correct set in bios as 2-2-2-0 7-12-0212 wih idle cycle 0clks :)
06-06-2006, 08:19 AM
Kain XS

Quote:

Originally Posted by eva2000

yup correct set in bios as 2-2-2-0 7-12-0212 wih idle cycle 0clks :)

Ok. Thats good. ;)
06-06-2006, 10:30 PM
coop

20min 26sec 148 cabye0543 fpmw http://img301.imageshack.us/img301/5500/ffr4bp.th.jpg
The second SPi in corner I open as soon as first one completes to help keep from c-bugging out. I run with SysTool running to keep on temps. After it calms down I can close it.
http://img125.imageshack.us/img125/4344/hyt8pe.th.jpg
One with voltages, http://img109.imageshack.us/img109/6622/ggt5vl.th.jpg
06-07-2006, 02:56 AM
eva2000

http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png
06-07-2006, 10:37 PM
coop

http://img139.imageshack.us/img139/7382/gtrr8nz.th.jpg
06-12-2006, 01:11 AM
Boble76

-TEAM SKOOTTERIT- 9-11.6.2006
(boble76, Dani, Electroid, mikkomaa)

DFI nF4 SLI-DR EXPERT
A64 FX-57 @ 3700Mhz (DryIce)
2x512MB Mushkin Black Level

20min15.953s

We had so much fun at this weekend!!Thank's for everyone!

:stick: :toast:
06-12-2006, 02:43 AM
before

Super PI 32M @3.7GHz is nice ;)
06-12-2006, 05:46 AM
coop

Very 'cool', nice job boble76.
06-12-2006, 06:12 AM
Boble76

Thanks to all Team Skootterit members, (from me) chiefly to Dani because this is his ex FX-57.
We didn't drive SP-tests very hard, because our point was made some high 3DMarks points, and we did I think. :rolleyes:

I forgot to take a 4G suiside-shot, never remember that but next time I'll drive more SP-tests.
06-21-2006, 12:18 AM
coop

With a 148..3613mhz. http://img49.imageshack.us/img49/526...01038kb.th.jpg
06-22-2006, 01:11 PM
gocchin

Crappy ram timings... someone give me some C3's... :)

http://www.jpop.com/gocchin/1240.png
06-22-2006, 01:13 PM
sierra_bound

Nice result, gocchin. Dry ice?
06-22-2006, 01:19 PM
gocchin

Quote:

Originally Posted by sierra_bound

Nice result, gocchin. Dry ice?

Yup... but I was stuck at 430fsb... the board would not go higher no matter what I tried... could be the max for that bad axe....
06-22-2006, 01:21 PM
sierra_bound

Your board is unmodded, correct? That may be the reason. I wouldn't recommend modding it. Too many boards have died.
06-22-2006, 02:01 PM
Gautam

Very, very well done gocchin. :up:
06-22-2006, 02:16 PM
gocchin

Thanks guys... yeah unmodded which is probably why I couldn't get much out of the Super Talents with only 2.2v.... with much tighter timings I think I could have gone low 12's.... :)
06-30-2006, 05:08 PM
gocchin

Asus P5W DH is faster than the Bad Axe so far.... 19 seconds faster using 30mhz less :)

http://www.jpop.com/gocchin/1221.png
07-01-2006, 02:24 PM
sai

1 Attachment(s)

My 24/7 Settings on air

Intel Bad Axe 304
E6600ES @ 3.6ghz
G.Skill GBHZ 2x1GB 400Mhz 3-3-3-8
07-09-2006, 06:06 AM
Amiteriver

Luv that Patriot ram @ ddr2 800
basic h2o

Edit -opps will get
07-09-2006, 06:44 AM
dinos22

Quote:

Originally Posted by Amiteriver

Luv that Patriot ram @ ddr2 800
basic h2o

you need to expand your windows there.........as the last line and validation is missing :)
07-09-2006, 06:48 AM
3oh6

Quote:

Originally Posted by dinos22

you need to expand your windows there.........as the last line and validation is missing :)

and you have to at least open a second CPU-z giving us primary timings. i will be greedy and ask for a systool shot of the secondaries as well ;)
07-09-2006, 06:51 AM
dinos22

Quote:

Originally Posted by 3oh6

and you have to at least open a second CPU-z giving us primary timings. i will be greedy and ask for a systool shot of the secondaries as well ;)

do you mean me or the guy above me heh
07-13-2006, 03:18 AM
eva2000

Knocked off 9.312 seconds of my old 32M PB of 13min 49.609s at 3810mhz with this new time @3809mhz

E6600 QPGE @9x423fsb = 3809mhz
Intel D975XBX rev304 unmodded
2x512MB Corsair PC5400ULv1.5 @423mhz 4-3-2-8 at 2.2v
1067fsb strap

click image for full screenshot etc
http://fileshosts.com/intel/Intel975...3min40s_tn.png

fastest E6600 on hwbot Super Pi 32M ranking and 4th fastest overall http://www.hwbot.org//hallOfFame.do?...pplicationId=7 :D
07-27-2006, 08:29 AM
3oh6

Quote:

Originally Posted by dinos22

do you mean me or the guy above me heh

haha, i meant the guy above. kind of late but you know how it goes ;)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:42 PM.

XtremeSystems