http://valid.x86-secret.com/show_oc?id=19957
2800 :D
311*9 at 1.475v in bios....
http://img163.echo.cx/img163/3463/su...b3111cc.th.jpg
Printable View
http://valid.x86-secret.com/show_oc?id=19957
2800 :D
311*9 at 1.475v in bios....
http://img163.echo.cx/img163/3463/su...b3111cc.th.jpg
0517BPDW 3200+ Vapo LS 10x330@1.632v BH-5 2-2-2-5 275@3.7v
cpuz verification: http://valid.x86-secret.com/show_oc?id=19999
http://www.jpop.com/gocchin/venicecpuz.jpg
SuperPi reasonably fast @ 3216mhz... with tight timings:
http://www.jpop.com/gocchin/venicesuperpi1.jpg
3500 LBBLE 0515FPAW [IMG]http://img146.echo.cx/img146/6521/32m2531fpaw3us.jpg[/IMG] Got a new stepping SD : CABGE 0516WPAW to try later. The 3500 LBBLE 0517APOW was ok but not as good as this one.
First post, w00t
LBBLE0515APAW
Mine seems to be the runt of the litter, cannot go over 2.8 prime
http://img.photobucket.com/albums/v7...-venice-OC.gif
2.8 is fine in windows, stock Vcore set in bios
http://img.photobucket.com/albums/v7...Computer/2.gif
2.8 will prime for a little bit but will always fail. Using 1.475 Vcore there, it ran for a while but now it seems to fail; it is inconsistent. Over 2.8 will always fail, even if I go over 1.6 Vcore it fails just as fast. Tried memory dividers and they did nothing.
This is annoying me. 2.75 Ghz is prime stable for hours with 1.475 Vcore, but 2.8 Ghz will NOT stabilize in prime for more than a little while, despite using over 1.6 volts. That is such a sudden wall :(
The ram is definitely good for more, i have ultra loose timings and i've tried all the dividers, tried increasing Vdimm and lowering it as well, but 2.8 Ghz will not become prime stable. I think i have one of the worst 3200+ APAWs but 2.75 Ghz with less than 1.5 volts, i shouldn't be complaining.
28 sec. at 2880 with 1.425 X 113%. [IMG]http://img91.echo.cx/img91/1617/28secpifpaw2hr.jpg[/IMG]
By Cal930
M/B：EPOX EP-9NDA3J VddrMod
BIOS：5215
CPU：Athlon 64 3000+ 0517EPMW
CPU Cooling：ZM-WB+Bath Pump+Ice（Water Temp2℃ Room Temo18℃）
Coolant：Deep Seawater MarineGold
Chipset Cooling：None
Memory:Aarare Original Rev1（SP）512MB×2
VGA：ATI XPERT 98 PCI 8MB
HDD：MAXTOR 6Y80P0
PowerSuplly：OCZ PowerStream 520W
Vcore：1.73V / Vddr：3.76V / Vio：3.74V
OS：Windows Server 2003
http://cal930.sakura.ne.jp/cgi-bin/c...3355_24_29.png
Dont know steeping or anything but I guess its the one with the L since its a 3800+
Vcore was at 1.625
Cooling is air but I cheated since it was cold out so I put a house fan blowign in my case. room temp was at 20C.
CPU temp maxed at 55C usually around 49C.
Pi pic is my best time and so is 3d mark. iT is stable enough to run those programs. Running 2750 right now, just got done playing counter-stike. I had trouble getting 2.7 stable untill I went to 1.600 volts. I can get more system info if needed.
Hi all,here is my first post :D
Venice 3200+ LBBLE 0515 GPBW
(air cooling Cooler Master Hyper6)
DFI lanparty NF4-D
Gecube X700 PCI-E 128mb
Corsair 3200XL REV 1.2 (256mbx2)
Enermax EG475P-VE
My first post :D
Here is my 3000+ LBBLE 0517 DPMW
http://img163.echo.cx/img163/3527/ve...300145v3ft.jpg
i have a LBBLE 0517 APNW also and will post results later coz im still testing :)
Quote:
Originally Posted by TekXoID
Thx :D
here u go
http://img241.echo.cx/img241/5996/a64tweaker5pp.jpg
a64 3000+ venice DBPW CBBLE 0512
Here is my scores, I want mone any ideas ?
315*9 1x1 2T
http://img55.echo.cx/img55/1280/315x97vq.jpg
282*10 1X1 1T
http://img129.echo.cx/img129/9462/282x101x14yu.jpg
i sold my DPMW and bought LBBLE 0517APNW :stick:
9x305@1.65V(bios) is the last prime stable OC however it is benchmarkable 9x312@1.7V(bios)
- 3200+ 0517 BPEW Z....4XX
- 1'66V
- Cooler Master Hyper 6 + papst 40cfm
- 35ºC idle 49ºC full
- DFI SLI-D, Mushkin Level II 3'3V, etc
http://img211.echo.cx/img211/7399/caliente5ms.th.jpg
It does 2600Mhz at 1'37v and 2650Mhz at 1'40v (for spi 1MB).
- 3200+ Venice 0517BPEW
- 1.64V Windows
- Zalman 7700CU
- DFI nF4 Ultra-D
- SP32M stable 2921MHz @ 1.64V
- 3200+ Venice 0517BPDW
- 1.64V Windows
- Zalman 7700CU
- DFI nF4 Ultra-D
- StressPrime2004 2906MHz @ 1.64V for 1h10min. now, I try 24h :D
BTW, for BPDW it's second boot, never seen default speed :slapass:
3200+ Venice
LBBLE 0515 FPBW
http://img57.echo.cx/img57/898/cpunumber4oc.jpg
2800mhz (10x280)
http://img26.echo.cx/img26/5023/desktop9hk.jpg
1.55v bios
1.5 in windows
~Fizz
http://img82.echo.cx/img82/4240/32m8ct.th.jpg
My new Cpu Venice 3000+ LBBLE 0517APQW.This Test was with Ram @166Divider.my Ram can handle 295mhz 1:1@ 2.5-3-3-7-1t,but with 180 Divider i have Problems with stabilitiy if i use the same Timings :(
OEM 3200+ Venice from Monarch in early May
2730 MHz, 730 MHz gain
0516EPEW
SmartGuardian says 1.61v, multimeter says 1.664v. I'm using 1.45v x 113%
Coolermaster Hyper 6
MBM5 says 45C max
DFI NF4 Ultra-D with the 510-3 BIOS, 2x512MB G.Skill LA
25h Prime95, in screenshot
ultra-d
watercooled
the temps are IDLE!!!
geil ultra-x @ 305 2,5 4 3 6
http://img81.echo.cx/img81/2199/ebay9qu.jpg
http://wowgame.free.fr/3000+%20939/L...517%20EPAW.jpg
http://wowgame.free.fr/3000+%20939/L...z1.52v11H4.jpg
http://wowgame.free.fr/3000+%20939/L...-1.584vspi.jpg
Home made watercooling :banana:
not finisht :D
it's too hot outdoor :(
next test Max Screen, i think 3175-3180Mhz at ~1.7v soon :D
My Venice
CBBLE 0512 DPAW
http://www.directupload.net/images/050513/sxR9gdvf.jpg
http://5-7.pyrokar.lima-city.de/liste.jpg
http://5-7.pyrokar.lima-city.de/2800%20Prime95.jpg
CPU-Z Validation
http://valid.x86-secret.com/show_oc.php?id=21161
all aircooled
runs also 2700MHz wirh default vcore
Thanks e7e9h3n :toast:Quote:
Originally Posted by s7e9h3n
Here is some stabitity test of this lovely baby :D
Prime stable at 2700mhz 300x9 vcore 1.39v,
and super Pi 32m pass at 2900mhz 290x10 vcore 1.52v.
As all we know ,3ghz on air was a high mountain of the Venice chips,
so I will try h2o cooling on it later,post more results soon :)
Heres my max stable. Bought from Cheif Value OEM
Any Idea on how many watts a 2800mhz 3000+ LBBLE 517 at 1.712v is? :lol:
Here are some initial results of my 3000+ 0516GPEW Retail from cheifvalue...
http://img226.echo.cx/img226/6969/gpew2700prime1qv.jpg
I'll report back later with more results!
3500 Lbble 0515fpaw also a 25min 32M Super Pi and an Aquamark screen below. Don't know how much more it can go, getting ready to paint with liq. electrical tape and cut some foam. [IMG]http://img230.echo.cx/img230/4319/29387qa.jpg[/IMG]
Well as I'm packing to go out to see the Grand Canyon. I decided to hook up my Vapo to my 3800. Here are the results of about a qauter of a day's OCing. Being that my computer is not hooked up to the internet, I just have screenshots. I'll be back in around 10 days. I'll get em verified then.
So i buyed to Venice 3000+
stepping: LBBLE 0516 CPCW :fact:
Z637478D50371
cooled with Hyper6
home temp: 26
CPU temp: 57
http://www.zone.ee/mardo53/Arvuti/Be.../31,266s.PNG?2
i gived 1,7v but its bit slower as that conf
http://www.zone.ee/mardo53/Arvuti/Be.../31,203s.PNG?2
i have bad mem, its D43 :rolleyes:
im bad in english :wth: :dammit:
http://valid.x86-secret.com/show_oc?id=21657
Not to bad on Geil Value Ram and Air Cooling.
Here is my new 3200+ doing 2.83 Ghz. Might be able to get it up to 2.9 Ghz, if the damn MSI board will give me a stable vCore. :-(
http://img.photobucket.com/albums/v3.../Venice/30.jpg
http://img77.echo.cx/img77/4016/prim...006mhz44de.jpg
just watercooled :banana:
water 0515 FPAW [IMG]http://img291.echo.cx/img291/8131/3ktwk2kl.jpg[/IMG]
AIRCOOL : XP90C with 90@5V
IHS REMOVED idle 23°C 21°Room (mobo on a table)
http://www.yamafoto.com/users/vroom/...n9cyc9xxkh.gif
Firs Test.
3000+ LBBLE 0517APJW @ Thermaltake Venus 9
http://img157.echo.cx/img157/8484/1079696qd.jpg
Until Soon
my venice 3200 with vapo ls
ADA3200DAA4BP
LBBLE 0517BPEW
http://img140.echo.cx/img140/7062/pr...hz128h28ue.jpg
http://cpull.free.fr/Overclocking/32...rpi-25.359.jpg
just the link cuz 1.7mb
http://cpull.free.fr/Overclocking/32...rpi-25.359.jpg
http://cpull.free.fr/Overclocking/32...pumark-399.jpg
http://cpull.free.fr/Overclocking/Sc...ce-3474MHz.jpg
soon 100MHz+ but maybe limited by my chip :mad:
3500+ Venice
Prommie r507 re gassed (thanks hipro5)
Kingston HyperX BH5 (good old) 2x512MB
did a WR (with the first attempt, too much headroom on this CPU) 3472.86MHz --> http://valid.x86-secret.com/show_oc?id=23069
My best Pi run so far
http://www.xtremesystems.org/forums/...id=32416&stc=1
new chip.
3500+ 0515FPAW
For some I can't pass Super Pi 32M at 280x10. It BSOD/froze in Windows after the 24th loop! :confused: In BIOS:
2.9v, 2.5-4-6-3-7-15-3-2-1-2-2560-1-E-A-0-7-2-8-5-256-D-16-7-D
Still tweaking so I can get 280x10 :stick:
current venice 3000+ oc 2840@1,52v 9x315
but this is not the max of cpu @ that vcore its just my tccd @ max 1/1
more to come...... also need to test my sd fast :slap:
ada3000daa4bp
cbble 0512dpbw
1229488c50073
http://users.telenet.be/duploxxx/oc/...02.5-4-3-8.jpg
duploxxx
update:
3000+ cbble 0512dpbw
oc 2963 for the moment at 1,58v on air
http://users.telenet.be/duploxxx/oc/...9%20166dev.JPG
duploxxx
http://www.zone.ee/mardo53/Arvuti/CP.../2922Mhz.PNG?2
i have 11Mhz more now :D :woot: :clap:
http://web.telia.com/~u18411604/venice.png
Best super pi run
http://web.telia.com/~u18411604/superpi.jpg
Highest suicide shot (verified)
http://valid.x86-secret.com/show_oc.php?id=23459
LBBLE 0517DPMW, aircooled, info in first pic :)
Heres my 32M SuperPI Run. :banana:
25m 31.031s blackjok3r[2867Mhz 3000+ 90nm Aircooled- KHX3200K2/256 @ 261Mhz]
http://www.lifestyleinteriors.org/ho.../25m%2032M.jpg
I also have this 1M on air cooling, Highest I have seen on air too. :D
28.891s blackjok3r[2936Mhz 3000+ 90nm Venice Aircooled- KHX3200K2/256 @ 266Mhz] Sorry CPU-Z etc. Isn't shown in this screenshot. :nono:
http://www.lifestyleinteriors.org/hostedsite/28s 1M.jpg
All these results were acheived on a modded Arctic Cooling Freezer64 which costs only $44 Austrailian Dollars. :banana:
Results from an A64 Venice 3000+ LBBLE 0517EPAW doing 3GHz on air aided by an XP-90 and a room-a/c.
Just a simple 1M SuperPi shot at 3G for now - prime stability will probably need more volts and better cooling. Waiting for the temps around here to show some mercy !
http://img165.echo.cx/img165/6185/x9...38p29mr.th.png
CPU-Z validation:
http://valid.x86-secret.com/show_oc.php?id=24151
This is a 32M SuperPi run with cpu = 9 x 290 MHz, 2 x 512 MB PDP @ 2.5-3-3-8 1:1 1T 2.7V:
http://img165.echo.cx/img165/2415/x9...all27zi.th.png
and it's CPU-Z validation:
http://valid.x86-secret.com/show_oc?id=24289
Jedi, you can do 3 Ghz on air but you need 1.48 volts for 2.61 Ghz? i can go over 2.63 Ghz with stock voltage but i still can't go as high as your chip...
Anyway here is my max stable for an extended period of time, i bet prime could have run longer but i dont have infinite time
http://img.photobucket.com/albums/v7...35/beach/2.jpg
And here is my max suicide so far, 2.97 with 1.60 volts
http://img40.echo.cx/img40/6974/297ghz0iw.jpg
http://img137.echo.cx/img137/3193/118ay.th.jpg
...higher soon
Fastest SuperPi so far (CPU-Z Verified )
http://panelo.com/images/super_pi_30.172_24074sm.jpg
3DMark2001
http://www.panelo.com/images/benchmark_3dmark2001.jpg
3DMark03
http://www.panelo.com/images/benchmark_3dmark03.jpg
3DMark05
http://www.panelo.com/images/benchmark_3dmark05.jpg
Sandra + Temps + CPU-Z
http://www.panelo.com/images/benchmark_sandra.jpg
Nice overclock - what about prime95 ?Quote:
Originally Posted by jcpsad
I can do - 2800 and 2900Mhz
http://valid.x86-secret.com/show_oc.php?id=24754 http://valid.x86-secret.com/show_oc.php?id=24752
and 2700 will do superpi32M and will bench 3dmark03 (3dmark05 it wont) but prime 95 large ftts seems to sort out the ones that BSOD and the ones that dont IMHO
Today I tested 2800MHz.
http://img146.echo.cx/img146/6751/28...able3nz.th.jpg
...more soon
Here's my 3200+ Venice... Haven't tested for max yet... Just playing around ATM..
Codes:
0518 LBBLE
Vapochill PE TI
XP90 & 92mm Tornado
rest of specs in "his" rig in sig...
I can't remember rest of the date code, posted somewhere around here...
So far 2.65GHz @ 1.488v (as reported by SpeedFan)
50 hours Prime95 stable plus 3DMark03 loop at 1280x1024...
Here's some screenies of 3D01 ^ SuperPI (all tests) & PiFast as well:
3000+ BH5@3,73v ultra-d vapo LS
1M
http://pk.robotron.ee/26.985.png
2M NB!- mem-timings should be same as on previous screenshot ;)
http://pk.robotron.ee/62.641.png
0517 APHW LBBLE on air with Gigabyte G-Power Pro Cooler @ 3200 rpm, suicide screehshot
http://img.photobucket.com/albums/v6...ylase/3GHZ.jpg
Validation : http://valid.x86-secret.com/show_oc?id=25623
benny - do you use a Tagan 480w? SmartGuardian shows my +12v rail really low too...
here is the venice i just sold: LBBLE 0516CPBW
http://img296.imageshack.us/img296/6...cpbw32m8kq.jpg
pathetic. :shakes: i didn't raise the NB voltage though, but still...
my 360w psu got a very nice rails then!!look!!no brand 360w
For the most part I've been with out a decent set of ram since the day after I got this chip over 3 weeks ago. :slap: Since my new set of LEs arrived from OPB on the 1st and then earlier today the 7/2 bios was released I just had to play! :banana: I mean after all I've set a WR with this chip but we still haven't got to know each other. :p:
Warmup, since the 0515 APAWs are know for a weak mem controller I just wanted to stress the CPU and not push the ram yet. :p: BTW this is being Air cooled by my XP-90 in my Antec SOHO server case with the door closed. :D
SuperPI 32M
10 x 291 @ 1.55v
9:10 (180) mem divider
http://img175.imageshack.us/img175/8...1ghz32m4am.jpg
Time to push the memory and mem controller! :toast:
SuperPI 1M
10 x 291 @ 1.52v
no divider
http://img175.imageshack.us/img175/757/291ghz1m9vx.jpg
1M at 2.91GHz was no problem as I expected but I was concerned about 32M...
SuperPI 32M
10 x 291 @ 1.55v
http://img175.imageshack.us/img175/4...ghz32m12qz.jpg
I was suprised at this result. I did not have to change a single timing. :toast: Lets move on to my final and my personal favorite test, Max 1M time. :D
SuperPI 1M
10 x 293 @ 1.52v
http://img175.imageshack.us/img175/1580/293ghz1m6jt.jpg
I could smell a 28 second 1M but I just couldn't pull it off. That should just about wrap it up, the pictures speak for themselfs. If everything goes according to plan I should have a 3000+ 0517 and some RedLine to play with sometime next week. :banana: Maybe with some RedLine running at 260MHz+ I'll be able to break the 28 second 1M mark on air so stay tuned! :cool:
here is my screen shots!!anyway i cant hit 3G,in case my PSU is a :banana::banana::banana::banana::banana: 360W Thermaltake 20pins dude anyone can help me out ??i can get fully stable with 2.95G on 1.55V what do i need for more clocks??i use stock AMD Fan now.my BIG TYHOON sold:(but samething only increase 6C on stock votage!
As posted in the 24hr primestable thread :)
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.
http://exscape.org/2800.png
this one ?prime95 i can do more than 30hours ,but but.....i forgot to take a shot i have this one now. :stick: [IMG]http://i16.photobucket.com/albums/b1...1/DSC01076.jpg[/IMG]
[IMG]http://i16.photobucket.com/albums/b1...1/DSC01131.jpg[/IMG]
[IMG]http://i16.photobucket.com/albums/b1...1/DSC01124.jpg[/IMG]
Quote:
Originally Posted by exscape
this is mine 1.43V on AMD stock,too hot temp~~~anything greater than 55C will frozen .
[IMG]http://i16.photobucket.com/albums/b1...1/DSC01114.jpg[/IMG]
here is mine 3200+ 0517 bpew
ihs off ,26°c ambiant t°
spi 32M
http://img242.imageshack.us/img242/6...aker8rz.th.png
prime 48h
http://img249.imageshack.us/img249/5...inal6qc.th.png
edit : prime screen
I took out my 9800pro and poped in an old pci graphics card, it allowed for some better clocking, pc didn't shutdown at 1.65 anymore or 1.7 but i think 1.75 did shut down this is all voltages selected actually is -0.1v, I was able to get it to 3.2ghz before it restarted, didn't get a screeny tho but, On my way there I stoppedd at 2.99ghz for this.
http://i21.photobucket.com/albums/b275/4rory/wahoo1.jpg
I forget what the ram was at, this is a bad screeny I know but I had to do it twice lol becasue I clicked ok the first time after it was done.\\
Right now I got 18amps on my 12volt line, and 480watts total, Should I go down to 450 watts and 26amps on 12volt line, or should I go up to 520watts and more amps on the 12volt line.
Nice clocks there 4rory. And to think earlier you mentioend that you had a bad memory controller and had to use 1 dimm with max divider to go past 2.9, now you say you hit 3.2! Whatever you changed, excellent improvement, you've got a fine chip.Quote:
Originally Posted by 4rory
Yeah, you need something with more amps on the +12V rail. Modstream isn't bad, do you have the money for the 520 powerstream?
Anyhow, to stay relevant, here's my latest
0517 APJW 3000+ @ 2.86 Ghz
http://img.photobucket.com/albums/v7...%20shiat/2.jpg
Now i am officially prime stable here, i have never let it run that long, no patience. Usually i run with less voltage because most of my tasks aren't as demanding as prime95, nothing important on my PC so works fine.
http://briefcase.pathfinder.gr/downl...32m%403240.JPG
http://briefcase.pathfinder.gr/downl...3251+25sec.JPG
These benchs are old and the vcore was way high my last tests with phase was 3250@ 1.66v...now i am with modded stock hsf because my single stage phase has a small prob.....
lowered my vcore a bit... 2808mhz at 1.63v
http://www.panelo.com/images/2808ghzsm.jpg
here is my new venice 3000+ 0517DPMW baught last week in a shop in Paris:
http://img129.imageshack.us/img129/7...dpmw2zk.th.jpghttp://img129.imageshack.us/img129/6...raph0oy.th.gifhttp://img129.imageshack.us/img129/7...core5ej.th.gif
http://img147.imageshack.us/img147/4...raph5xq.th.gifhttp://img147.imageshack.us/img147/6...olt31mq.th.gif
http://img147.imageshack.us/img147/2...olt53uu.th.gifhttp://img147.imageshack.us/img147/4...lt125vq.th.gif
I'll see what it does with sp2004 when I'll have the time but somebody else have a venice 3000+ which pass OCCT at 2700@1.34V in air? :banana:
room temp was about 23°C
I saw that peter_lu had 2800@1.4V but the screen shows that he ran sp2004 for just 1min
update for my 3000+ 0517DPMW
soon 3.7GHz on cascade
http://membres.lycos.fr/cpulloverclo...que/27.422.gif
frequency max spi 8M = 2983MHz but 5'02"1XX
http://membres.lycos.fr/cpulloverclo...e/5.00.875.gif
http://membres.lycos.fr/cpulloverclo...ique/24.17.gif
3000+ 0517APCW
Air Cooled by XP-90
SuperPI 32M
http://img144.imageshack.us/img144/5...731532m4nv.jpg
3000+ 0520 EPMW
DFI NF4 ultra
1x512 MB A-data PC4000 (Have almost been killed, the only run memtest at max. DDR400).
Vapochill SE
24/7 - It haven't crached og lockup once.
http://i10.photobucket.com/albums/a1...de/3GHz32M.jpg
My max screenable - so far. I can't get my FSB over 350 (This was med by blowing a 120 mm fan at the chipset cooler).
http://i10.photobucket.com/albums/a1...pade/33GHz.jpg
A new high for me :woot: Benchable 2.91 on air. Fails prime right away, but is fairly stable. Also a 32m at 2.8 which is 100% prime stable.
Alrighty. I received a 3500+ CBBLE 0512 DPAW yesterday. So far so good. I can pass 8M Super Pi up to 2.9ghz (290x10 1.55v) If it passes 8M then it will do everything I need without a hiccup. 32m is just to damn long!
I can get a suicide shot at 3ghz but I can't do much other than browse. I tried 300x10 and 273x11 but nogo either way. Not to bad for a second hand cpu that I bought here for a great price!!! I have only had one other 2.8ghz+ cpu and it was a 3500+ claw that ran to damn hot. I am psyched to finally get a low voltage cool running 2.9ghz cpu! :toast:
Dfi nF4 ultra-d
tccd adata pc4500
watercooling
@vstock
http://cisko08.free.fr/pc/venice0512...0occt%20ok.PNG
:banana:
this chip right here week 19 from ewiz its a 0519DPJW LBBLE and heres the oc so far with a few benchies....Quote:
Originally Posted by dng29
peace perc,
My 0517 APJW running with a little more volts at 2.9 Ghz
2 hours prime stable and still going
(still air cooled by XP90)
http://img.photobucket.com/albums/v7...03-2-hours.jpg
I picked up one of the Venice 3000+ CPUs that was being discussed in the Deals forum. At $115 I figured I could take a chance. I got a YBBLE 0524DPBW.
Early results are okay but not great. I'm SuperPi 32M stable at 2.7ghz on air. I think I'm pretty near the limit because I'm giving it almost 1.7v (1.55+13%) and that's usually where diminishing returns kick in hard. Surprisingly the Thermalright XP-90/Zalamn 92mm combo I'm using seems to be holding the temps at load to a MBM reported 42c.
I'm using the the shipping bios (3-10) on this new Ultra-D mobo and got my OCZ Platinum Rev.2 TCCD out of retirement. Still trying to tweak the settings a bit.
http://img299.imageshack.us/img299/8...524dpbw4gz.jpg
I hand picked this Venice at a PCClub in San Leandro CA. Its a LBBLE 0517GPQW. I swapped out the YBBLE 0524DPBW and put this one in the very same rig. Thank goodness this handpicked CPU outperformed the less expensive one I bought "blind" from E-Wiz, otherwise I would be hitting myself in the head with a hammer right now. Looking good on air.
http://img273.imageshack.us/img273/6...gpqwair9qa.jpg
I just finished leak testing a Swiftech kit and I expect to see a little bump when I get it hooked up with this CPU. Hopefully I'll post results sometime this weekend.
The Winnie in my sig may be looking for a new home soon because my Mach 2 will be mating with this CPU whenever ATI gets their new mobos and video cards out. :)
Next test:
http://img224.imageshack.us/img224/7...able1vu.th.jpg
...more soon (I hope) ;)
i got a ADA3000DAA4BP LBBLE 0519DPJW Z649556E 53772 venice from Ewiz. i just got started playing with the cpu and so far im able to run 3d stable at 2470mhz 270x9 2.5-3-3-7 using the stock v-core of 1.36v. ive tested the memory all the way up to 300htt at 2.5-4-4-7 1T 2.7v so now i just need to throw in a divider and see how high the chip will actualy run? i know the meory will run 300htt and i suspect more with a divider so my fingers are crossed for 2900-3000mhz :)
peace perc,
heres an attached screeny of my 0515FPDW
EDIT:on stock cooler
http://img.photobucket.com/albums/v5...891/screen.jpg
Here is mine;
3000+@2900
LBBLE 0516DPMW
1.68Vcore
chilled water, 7/8c idle 22/23c under load
DFI Ultra-D (no SLI mod) 7.04 bios
KHX 3500 BH5@241.5 2.2.2.6 3.4v (max 260 2.2.2.5) 3.4v
Leadtek 6600 non-GT
and this is the screen; (it's too hot here in Turkey, so these are not the max)
OMG WOW
I work still new bios DFI NF4 ram tabl 3.16
http://hslab.pl/Merlin/Pics/FSB_375.jpg
Merlin
prime @ 3ghz
http://img318.imageshack.us/img318/1...hzprime5an.jpg
& superpi 1mb (wenn das ding nur 1mb chache hätte......)
http://img265.imageshack.us/img265/4...enannt39cs.jpg
3000+
ADA3000DAA4BP
LBBLE0521APMW
DFI NF4 Ultra-D
Air cooling is running at a low speed so my ears don't bleed (Venus 12), which is why my temps are getting a bit high. Intend on getting my w/cooling out and strapping it in place again, just need to find time. Also will be strapping my LS to it just to see what it can do with some sub zero cooling.
Ram is woeful, so the system running at 150 divider, but hopefully that will be resolved in the next couple weeks ;) BTW, this is a stable 24/7 system, not a suicide.
Those are some great OC you guys have. :woot:
Me, on the other hand, like to do OC at the cooler side, do not like to raise the voltage to over 1.4.
http://members.shaw.ca/tsopin/0718053.jpg
http://wowgame.free.fr/3000+%20939/L....9v3153Mhz.jpgQuote:
Originally Posted by by -=Merlin=-
Merlin BIOS 03/07/05
can i test your new 10/07/05 merlin ?
where can find it :confused:
(or PM me to test :toast: )
my 3000+ 0517APJW
stuff in sig, except watercooled
Storm G4, Maze4, D5, 2-302 heatercore
4.5+ hours prime95 @ 2.95 Ghz w/ 1.66 volts
http://img.photobucket.com/albums/v7...verclock-1.jpg
my results.
LBBLE 0517 GPMW. Its not flash i know
http://i7.photobucket.com/albums/y275/knobi/2.jpg
latest. Dont look at the vcore. Terrible isnt it? Running 510-1 bios
http://i7.photobucket.com/albums/y27...i/276caa4a.jpg
Got 2.96 Ghz fully stable
I clockgenned up in windows before i started SP2004 running, so the CPUZ reading is correct, its 2955.3 Mhz. Also SP2004 is saying the incorrect time, i started ~1:28 AM and let it run overnight.
http://img.photobucket.com/albums/v7...clocking/2.jpg
http://i16.photobucket.com/albums/b17/EAGE1981/1.jpg
new week 0525 APMW E6 core!i can do 1.26V but prime95 only stable 5hours!! :stick: :banana: :banana: :banana:
http://afireinside.evilspork.net/AFI/venice/GCS0010.jpg
3500+ LBBLE 0519 venice under dry ice -65C load
Well I've got a new board on the way as this one has some issues. But I still got a pretty good OC out of this thing with my Vinnie. :D
[IMG]http://img237.imageshack.us/img237/4...hunter13ml.jpg[/IMG]
Chip: LBBLE 0517
Colling in sig
3 Ghz is stable with 1.73 volts...
Here is 2.99 stable with 1.7 volts, and i'm trying to bring the Vcore down even more
http://img211.imageshack.us/img211/5...11hours2pv.jpg
air cooled just got this from newegg
retail 3000+
hyper6 cooler
http://www.xtremesystems.org/forums/...id=35335&stc=1
hi all
my 3000+ ybble0523cpgw
asus a8n-sli
294х9 :brick: Very badly I in a shock dear edition
http://i12.photobucket.com/albums/a215/umnik/.jpg
Yay! :)
http://www.mismatchrats.com/crap/so-yay.jpg
http://valid.x86-secret.com/show_oc?id=30887
Finally got my RAM working at 300 (Super Pi 32M and OCCT stable so far), thanks to the new 623-3 BIOS for the DFI nF4 Ultra-D. CPU is still at the same speed as before, it hates going much higher, the voltage just ramps really after this point.
I should be able to lower the CPU voltage a bit as I had it at 270x10 24h stable at 1.45V before. :)
Venice 3000+ CBBLE 0512 DPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)
http://www.membres.lycos.fr/boblemag...pbw/vi3000.jpg
2700mhz at 1.37v (300x9)
http://www.membres.lycos.fr/boblemag...5-VoltCore.png
2820mhz at 1.5v (313x9)
http://www.membres.lycos.fr/boblemag...1-VoltCore.png
http://www.membres.lycos.fr/boblemag...bw/2820mhz.png
here´s my 3000+ 0529 :) still testing...
here's my 0528 GPFW , at 2700mhz it freezes/reboots (I think a bad cpu :( )
http://img33.imageshack.us/img33/9903/superpi33s0uc.jpg
Xyus
This chip will do 2.832ghz stable but doesn't play nice with the ram at that speed. Both were tested seperately and ran fine but won't run together at max cpu speed.
3000+ Venice LBBLE 0517APJW
VCORE 1.74v (Reads higher in cpu-z pick due to fluctuation)
Water cooled
Temperatures idle 30ºc-31ºc/load 40ºc-41ºc
Specifications of System: In sig
Stability Tests: Prime95, 3DMark 01 03 05, Memtest86
http://img388.imageshack.us/img388/9...shot0016mn.jpg