oke bro ;) i'll do it 32m when i am free :)Quote:
Originally Posted by bachus_anonym
Printable View
oke bro ;) i'll do it 32m when i am free :)Quote:
Originally Posted by bachus_anonym
here is my new ocz 4200el plat chugging along so far.... i think if my memory controller was just a little bit stronger i could have gotten 2.5-3-3-x but I just couldnt get 32m stable with trcd-3...
Added... Thanx a lot :toast:Quote:
Originally Posted by arctic-k20
Glad to see your long VX/bios/memory controller nightmare is over. They'll run cool and provide plenty of bandwidth and a lot less grief. :toast:Quote:
Originally Posted by arctic-k20
thanks gundamit......im glad as well....its nice to be able to turn off the computer and know it will turn back on every time now ;)
this is 7+ hours goldmemory 6.64 stable (and prime95 of course) and is my daily use...
290MHz 2,5-4-3-5 1T only 2.6v with no active cooling on ram
http://www.crespo80.altervista.org/cesare/tccd290.jpg
what kind of ram?
it's written in the sandra screenshot:Quote:
Originally Posted by FlyingHamster
centon advanced (very very good ram)
:)
EDIT:
chip Samsung TCCD-507
pcb Brain Power 808
but this goal was achieved by setting all the parameters in BIOS and testing them with the hardest memory test program, goldmemory 6.64.
If i clock in Win with clockgen and test only with superpi 32mb, i can achieve higher frequencies...
later i'll try with active cooling on ram (a simple fan), because now this is the limit, they aren't 100% stable even if i raise freq by only 2Mhz...
and increasing voltage to 2,7v has no effect, resulting in little worse results
:eek:
What's the board? DFI Ultra-D or SLi? Or something else?
Yes, GoldMemory 6.64 is a really nice tester, seems much better than Memtest1.55 and on par with "Memtest for Windows" :)
Also, is that Centon PC3200 Gemini LL ???
3700+ San Diego
DFI NF4 Ultra
OCZ 3200EL Platinum Rev.2 at 2.7v
Powerstream 600
http://img242.echo.cx/img242/9388/9x305pi1m3kk.jpg
http://img242.echo.cx/img242/9219/8x305pi32m4kh.jpg
Will try to get a 9x305 SPi 32m, still working with this SD.
the board is a DFI NF4 SLI-DR, now i have my config in sign ;)Quote:
Originally Posted by bachus_anonym
the centon stick are "OEM", not sold in pair, I brought them from computersma of this forum.
They have Samsung TCCD-507 chips and Brain Power 808 pcb
I made several tests with practically all of the parameters in the BIOS, to find best settings for my ram. At a first time I worked so:
change a single parameter in BIOS and test with 10 runs of memtest #5
look how many errors it reports and choose the option with less errors
But when i repeated the tests with the same identical BIOS settings I obtained very different results (like 200errors VS 100 with same settings!!!), so I left memtest ang gone for goldemmory.
With this tester i obtained very precise results, and if I repeat twice a test with the same BIOS settings, the max difference, in terms of errors, is for example 205 VS 200.
So, for every single parameter in BIOS I made a full goldmemory pass (about 35min) and choosed the option with less errors.
Some settings now are different from the screen i posted (like the tRAS from 5 to 7 and the tREF from 3072 to 2048)
At a first moment i followed the guide from KAKAKOTO and ONEPAGEBOOK but then i went on my own
219x12 on some old ch-5. can do 235mhz with the same timings but the cpu doesn't seem to like it right now. still doing some tweaking. hope to be back with air cooled 2.7ghz+. here's the screenie.
http://img239.echo.cx/img239/9707/w3...rest0qe.th.jpg
this was with a DFI UT 250gb and a 3400+(NC) week 0503
Here's my GSkill LE at 300. Not 2.5 3 3 7 unfortunately, but other timings are quite tight. Also stable to memtest for Windows for 8 hours (at which point I decided it was stable ;) )
http://img33.echo.cx/img33/5437/gski...arks3se.th.jpg
Uh, this is for TCCD only :stick:Quote:
Originally Posted by omga14
@crespo, CTKP and uranium
Thanks guys :toast: Listing updated!
Also, CTKP to be the first one here to add his San Diego to the list :thumbsup:
@omga14,
yeah, sorry bro! at the moment we're gathering info on TCCD OCs only ;) but, maybe it's time to start another thread then... Hmmm :)
DDR632 9x316...32M may be a little slow cause I was surfing the web while it was running :p:
http://img226.echo.cx/img226/7934/mem4ez.jpg
Forgot to bring up voltages for the first screen shot :slap:
http://img226.echo.cx/img226/9749/volt1gf.jpg
SuperPI 1M just for kicks :)
http://img67.echo.cx/img67/6899/untitled2copy9pp.jpg
@Rubescen
I just added your 32M that I found here.
I was looking for some good TCCD clocks and tripped over your post. I hope you don't mind. If you get a better one then just post it here, please ;)
Anyone tried these? Are they tccd? :sofa: Check em out http://www.ocztechnology.com/product...fi_nf4_special
Yup..TCCDQuote:
Originally Posted by hangLewZ
:poke::rofl: :ROTF:Quote:
Originally Posted by Bachus's "title"
Sorry, couldn't resist...first time I noticed that little funny :p: In honor of your "title", may have something for ya this weekend bro ;)
:lol: Yeah! Since I have started to be known for bugging everyone I can for 16M/32M Pi, I bet they whisper that behind my back :lol:
You got some TCCD results for me? Sweet! Don't forget about BH-5/BH-6/UTT thread too, while you're on it :D You've been stockpiling those SpeedPremiums and Blues for quite a while now :stick: :p:
I get my OCZ 3200 Plat Rev2's on monday, i'll definetly let you know how it goes :D
Getting more TCCD in an hour. Along with a venice to play with. Results then :D
http://img140.echo.cx/img140/1488/ddr6203rg.th.jpg
TwinmosTwisterPro3200 TCCD 2x512mb :woot:
This is max SuperPi 32m stable Cpu Overclock with my 0437 winchester:
http://img140.echo.cx/img140/3135/2610stable6bv.th.jpg
300mhz 2.5-3-3-7-1T is memtest & 3dstable but not SPi 32m.
http://img140.echo.cx/img140/4697/8x300prime3bh.th.jpg
hi,
I would know what's the max memtest of OPB and others who is in 2*512 and at 2.5-3-3-5?
because I have a kit of centon pc3200LL and the first stick is ok at 315 and the second at 310 each one in single. what could it make?
thanks.
DFI nF4 Ultra-D / Bios 310 / air cooling / Winchester 3000+ (CBBID)
300x8 / 2x512 MB G.Skill 4400LE (TCCD440)
DDR600 8-4-4-2.5-1T 2.8V
- Spi 32MB stable
- 6h Gold Memory normal test stable
- 10h memtest86+ stable
- Prime small fft / in large stable
- S&M cpu/memory test stable
Screen:
http://img39.echo.cx/img39/2678/300x8spi32mb8wh.th.jpg
http://img39.echo.cx/img39/9008/300x8prime23to.th.jpg
http://img39.echo.cx/img39/4015/300x8prime2gs.th.jpg
http://img39.echo.cx/img39/3743/300sandra3ih.th.jpg
flu1: memtest dos is a lot less stressful than other testing programs because it ONLY tests your ram.....you will be able to memtest in dos a lot higher than you will be able to run windows stable !!
if you can do superpi32m @ 310 2.5-3-3-x and run windows memtest you will have the best 2 sticks of ram i have seen on any forum in a long time !!!
G-Skill PC4400 'LE' 440 Chips on BP PCB! @ 2.5-3-3-7 2ith 2.9V + 0.03V (2.96V BIOS)..
http://www.thunder-keep.co.uk/site/h...igo/277x10.jpg
This is NOT the best speed achived, I have memtested at 285Mhz @ 2.5-3-3-7 @ 2.96V but I am running the CPU in.
With 3V I *Should* get 290 stable!
Concorde
not to be a stickler but you need to pass superpi32 to join in the fun!!
Quote:
NOW... Here's the catch! If you think that SuperPI 1M-8M or Sandra are a sign of stability, then don't even bother showing it to us... There are many other threads more suitable for that kind of "stunts" in Xtreme Bandwidth forums.
So, for instance, if you have a set of TCCD that breaks DDR600 barrier @ 7-3-3-2.5-1T w/ SPi 32M and min. x7 multiplier then don't hesistate and bring it here... It would be very appreciated if you could add Sandra and A64Tweaker screens at same exact settings that forementioned SuperPi run was made... Just to give others an idea how to make theirs TCCD perform stable at higher speeds
Oh come now, 4 hours of BOINC not enough!
Got tests coming up, so give me a week to 32mb at my highest 2.5-3-3-7 speed.
Concorde
@Concorde RulesQuote:
Originally Posted by Concorde Rules
Just like arctic-k20 said above...
SuperPi 32M only in this thread, please. Not interested in anything else ;)
@eraser
Is that DFI NF4 board?
@XiN
I'm pretty sure you can take those sticks higher (for Spi 32M run) if it's Pime95 stable @ same speed as Spi 32 you posted ;)
Thanks guys :toast: The list is getting longer. Waiting for more :thumbsup:
i got 325 stable with my winni @ 2,5 4 3 6
with the venice my mem only does 310 @ 2,4 4 3 6
both @ 2,9 v......
i will take an stupid screen @ only 310 later when my water cooling arrives
Just for Xtra Info: did the same, (dif dfi (refurb.)board and cooling in bsmt pcp510 20pin, prepping this one for my wifes puter :hehe: ) replace GBLE w/ GBLAQuote:
Originally Posted by mad mikee
Will try for more b4 going through the screenie hell again.
Yes its DFI NF4 UltraD :toast:Quote:
Originally Posted by bachus_anonym
Yes they are prime stable at same speed ... but unfortunely memory controller (my 3000+ is a CBBID :\) is bad and infact I can't go above 300 ... I have tested many configurations at 305/310/312/315 (with 2.8V/2.9V/3.0V) but it doesn't finish spi 32MB :(Quote:
Originally Posted by bachus_anonym
UPDATE 1:
Uhm, a little improvement
DDR600 7-3-4-2.5-1T
http://img122.echo.cx/img122/1262/30...32mb1kv.th.jpg
UPDATE 2:
With bios 510-3 I have broken 300 mhz barrier :toast:
310x7 | Bios 510-3 | Vdram: 2.83V
DDR 620 8-4-4-2.5-1T
http://img178.echo.cx/img178/2446/dd...32mb4kn.th.jpg
bachus_anonym, you can edit my result :D
edited to combine three consecutive posts - bachus_anonym
Got to 305 100% stable, going higher as we speak but its getting tough. dfi nf4 ultra-d 310 bios 2.91 volts, i think the chips are getting hot, as the only thing blowing on them is my xp-90
Edit: forgot to say, g.skill pc4800 2*512 with 440 chips.
Excuse me for too many posts, but I have done another personal "record"
DFI nF4 Ultra-D | Air cooling | bios 510-3 | 315x7
DDR630 7-4-4-2.5-1T SuperPi 32M stable :toast:
http://img273.echo.cx/img273/3122/ddr630744259pe.th.jpg
that is my gskill la 440 chips, sli-dr and fx55 0442
320x9 - 2.5-4-3-7 - and its can pass the tests but is not 24/7 stable.
305x9 - 2.5.4.-3-7 - is 24/7 for me :)
http://valid.x86-secret.com/show_oc?id=18852
Seems as though it might be TCC5, but is that ok? :P
DDR 600 @ 2.5-4-3-5 x8
I'll try for my 300x9 once I get my water :P
@cupra,
I'm sorry man, but SuperPi 32M is neccesary ;)
@justwOo
TCC5 is fine too as long as I see 32M ;)
Sorry forgot to take a Cpu-Z But
DDR600 2.5-4-3-5 300x8
http://i7.photobucket.com/albums/y28...600spi32mb.jpg
Not prime stable. But manage OCCT:D
OCCT is nice for a quick test.
http://i7.photobucket.com/albums/y29...2MBpi_occt.png
Since I sold these bad boys to Major this week I figured why not give them one last push to see if I could still reach 316MHz and maybe a little more. :D So I pulled out everything in my bag of tricks and this resulted in a new personal best of 321MHz :slobber: that's DDR642 for anyone a little slow. ;) It was about an 6 hour straight tweak fest but I'm happy with the results. I'm almost sad to see these guys go but atleast I know they're going to a good home. Hope you enjoy Major! :p:
http://img274.echo.cx/img274/779/ram3210ee.jpg
G.Skill 4400 LE 2x512MB (437 chips) http://picserver.student.utwente.nl/.../picserver.gif
These are the new OCZ Plat. Rev 2 TCC5. After weeks of trying all different bios and settings, this is the best I can do. Using 5/10-2 bios
i have 2x512 mb adata vitesta ddr566 and they cant run over 275 (2,8v) stable i have used 2,5-4-3-7 ,3-4-4-8 and same results, cpu is windy 3000 0450 2,6ghz@1,55 prime stable mobo: gigabyte nf4-4x GA-K8NF-9 s939
any help or those sticks are so bad?
Please update my results in the first post with my new results from a few post up thx! :toast:
@Opteron96
Your recent result is just unreal! 32M @ 310 6-3-3-2.5-1T with 2x512MB is something, that I'm not sure anyone has ever done before. Don't get me wrong, but I need to think about this result a bit. I might need to come up with some sort of verification for that. Don't take it personal, OK?
Other than that, list is UPDATED!
Unbelievable how can be only 3 entries in the 2x512MB - Trcd 3 section. This is my small contribution to this section. I will update it since I know I can do more but have no pics atm.
Rig:
- 2x512 GSkill 4400 LE 440 TCCD chips (actively cooled)
- winchester 3500+ CBBID 0451 (cooled by XP120+190CFM Delta)
- DFI NF4 Ultra-D
http://img282.echo.cx/img282/3010/27492hn.th.jpg
@amrgb
If you don't mind, I'll wait for next screenies. What I need to be on the screenshot are: SuperPi window, A64Tweaker and 2 instances of CPU-Z (CPU and Memory Tabs). On both CPU-Z windows, version (e.g 1.28.6 or 1.29) should be visible. Thanks!
OK, just fine for me (and you save some work :) )
I guess that I have to increase my screen resolution in order to get all that in one screenshot :p:
I will try my best for the first place. 301 @ 2.5-3-3-7 (keep on dreaming, it pays no tax... yet :D )
Here are some TCC5 results, I think I got everything I need in the SS, if not let me know and I can rerun the 32M. Using BIOS 0510-3 and the gear in my sig.
DDR 614 @ 2.5-4-3-5, 3.04v (DMM).
This is 24/7 stable. I can squeeze a few more Mhz if I loosen timings more but its not worth the performance loss IMO.
http://members.shaw.ca/Eldonko/306-2.JPG
I don't see many posts with trcd of 3, so I thought I would post one. 10x270 2.5-3-3-8. I can run 3dmark, pcmark, sandra, up to 8m pass of super-pi 10x280 2.5-3-3-8, just can't get 32m to pass.
@bachus_anonym
You can now create an entry with my score. I think that I could do a little better, but it will take me much more effort than to get this one.
Score: 2.5-3-3-6@296 1T 1:1 2.9v
Memory: G.Skill 4400 LE, TCCD 440
CPU: 3500 Whinchester @ 2367 (296x8)
Board: DFI NF4 Ultra-D
http://img39.echo.cx/img39/226/29621dh.th.jpg
PS: I can put this sticks to work (flawlessly) with CAS 1.5 @ 200-205 2.6v. Is this a common result for TCCD? I thought that TCCD couldn't do CAS 1.5 :p:
EDIT: bios 510-2
I was hoping more of you would list the BIOS revision that you're using to achieve such clock speed. Anyone here have a general consensus on what BIOS revision to use besides 3.10P?
Here's some OCZ EL PC3200 Platinum rev2, results on their newer version 1.1 [TCC5]...
Quote:
Originally Posted by bachus_anonym
Didn't noticed it till saw this...mine is the GKILL PC4800 512LA 2x256MB, not Centon or Gemini....never heard of those before :lol: :D ;)
here my geil ultra x :)
its not the max ists my allday setting :D
http://img153.echo.cx/img153/5631/dsc002527kq.jpg
I've flashed from 510-3 to 510-2 and gain 1MHz with a little bit better alpha timings :D
2x512MB G.Skill PC 4400LE (437 chips)
http://picserver.student.utwente.nl/.../picserver.gif
Update :D
TCCD 2x512MB DDR636 Super PI 32M stable
Corsair 3200XLPT Rev 1.2 /346mhz@3-4-4-8-1T/Vdimm 2.8v
DFI Lanparty NF4-D / bios 310
Venice 3200+ (LBBLE 0515 GPBW)
Air cooling / Coolermaster Hyper6
DDR692 32m pass :D :D
Shown as bellow screenie. :)
Test Rig:
- AMD A64 San Diego 3700+
- G.Skill F1-4800DSU2-1GBFF, DDR600 @ 5-3-3-2.5-1T
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm
All valid entries have been added!
@KenLau
:welcome: to XS, man! Oustanding clocks there :slobber: :toast:
abit an8 sli
gskill 2x256mb f1 la
I have another screenie of 330mhz but with looser timings if you want it
http://members.cox.net/italygirl25/tccd%20325.bmp
heres the screenie of super pi bachus. had to drop down to 300mhz as i have a bunk memory controller on this 3500 claw however if you would like i can loop memtest for 24 hours and snap a shot of it for tccd at 325mhz stable.
http://members.cox.net/italygirl25/super%20pi.bmp
Howdy bachus and others !
Results below with 2 x 512 MB PDP Patriot XBLK at DDR580 2.5-3-3-8 w/ CPU speed = 9 x 290 MHz, vdimm @ 2.7V.
http://img41.echo.cx/img41/1126/x9h2...all24wk.th.png
CPU-Z validation here:
http://valid.x86-secret.com/show_oc?id=24289
Hi @ All !!! So this is my first post in here!
When I made my system, based on S939, I've been trying from the very beginning to overclock it 1:1 and this is what I've managed so far with
my A-DATA DDR566 sticks. Normally they do @283MHz with 3-4-4-8,
I succeeded stable use @285MHz with 2,5-4-3-7.
I'm gonna try in the future to push the system a little bit further :)
What do you think of the results? If you have any suggestions tell me please.
The settings I use in Genie BIOS are the following:
Tcl........2.5
Trcd......4
Tras......7
Trp........3
Trc........9
Trfc......14
Trrd.......3
Twr.......2
Twtr......2
Trwt......2
Tref.......3072
Twcl......Auto
Interleave............Enabled
DQS Control..........Increased
DQS Value............255
Drive Strength.......7
Data Strength.......2
Max Async............8
Read Preamble.......5
IdleCycle Limit.......256
Dyn.Counter..........Enabled
R/W Queue Bypass.16x
Bypass max...........7x
32Byte Gran..........Disable
bachus, I've got some fresh stuff for your thread:
1. 2x512 DDR604 2.5-3-3-6 1T (going for the top :D )
2. 4x512 DDR572 2.5-3-3-8 2T
Rig:
- A64 3500 Winchester (CBBID 0451 EPMW) + XP120 + Delta 120mm 190CFM
- DFI NF4 Ultra-D (Bios 510-2)
- 4x512 GSkill 4400 LE (TCCD 440 chips)
- CM Stacker (case temperature 30-31ºC)
DDR 604 2.5-3-3-6 1T 2.9v
http://img176.echo.cx/img176/7305/ddr6049eu.jpg
DFI memory timings (from top to bottom):
200-E-2.5-3-6-3-12-16-3-3-2-3-2336-1-E-A-0-7-2-9-F-6-256-E-16-7-D
:D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot:
DDR 572 2.5-3-3-8 2T 2.9v Bank Interleave Enabled
http://img128.echo.cx/img128/1038/ddr5722gb9no.jpg
DFI memory timings (from top to bottom):
200-D-2.5-3-8-3-16-22-3-3-2-3-2046-1-E-A-0-7-2-9-F-7-256-E-16-7-D
2.5-4-3-8 OCZ platinum rev. 2 TCC5 running 300x9 with 3000+ Venice 0517 APJW .
ram cooled by 120mm Sunon
@amrgb
Nice results man!!!
Could You tell me what are Your's everyday settings of these 4x512 2T?
I'm concerning to buy another pair of LEs and wonder if they clock high enough :D I'm interested what is the max stable (gaming, win apps) MHz with 2,5-3-3-6 and tightest alpha timings as possible.
Using a mixed set of G.Skill LE 4400 with 440 chips and G.Skill LA 4800 with 440 chips. Maximum Memetest stable was 290mhz and the best I could get in Windows was 285mhz PI 32m stable.
Using a DFI NF4 SLI with 3700+ SD (see server in my sig)
Thanks Ziku.Quote:
Originally Posted by Ziku
Well, it's difficult to say what are my everyday use settings with 4x512 since I started to use 4x512 only a couple of days ago :D
But I have already two profiles: default and max overclock.
At default I run my cpu at 2200 with memories at 200 2-2-2-5 2.6v and following timimngs (bios 510-2):
200-D-2-2-5-2-7-9-0-2-1-1-3072-1-E-D-0-7-2-6-F-4-0-E-0-7-D
At max overclock I run the cpu at 2600 with memories at 260 2.5-3-3-7 2.7v and the following timings:
200-D-2.5-3-7-3-12-16-3-3-2-2-3072-1-E-D-0-7-2-8-F-6-128-E-16-7-D
The default profile is fully tweaked and I cannot tight any further. I should note that it's the exact same setting I was using with 2x512 (except for the 2T). So here no loosening due to the 4 dimms.
The max overclock profile is still in a "alpha" state and is my start point.
I used to test my settings with 4 instances of superpi32M running simultaneously and both profiles can pass this test and everything I've thrown to them so far.
With a good memory controller, you should have no problems with 4 dimms, and you can also pick the best 2 to set new 2x512 records, like I did :D
If you want more info just ask.
an old screen with gskill LA 2*512 2.5-3-3-6-T1@300mhz
-> http://users.skynet.be/bk265593/wooot.JPG
I think i can do +-305mhz 2.5-3-3-6
@ L@TrO
You have to provide a screen with a superpi32M run and two cpu-z screens, showing the cpu and memory tab (make sure that the cpu-z version is visible) in order for your result to be comparable with the results in this thread. Superpi2M stability is way far from 32M stability.
Take the opportunity and give a try to 305 ;)
Hi @ All again!
So here there is a stable system with my Venice 3000+ @2700 1:1
and my A-DATA DDR566 sticks running @300 and timings 2,5-4-3-7 1T :)
Be well and have fun!
Hi,BachusQuote:
Originally Posted by bachus_anonym
thanks a lot !! I'm glad to join the XS too ! :toast:
I"m also run more tests with this nice tccd,
347mhz (DDR 694) 3-4-4-8-1T /2.8V Super Pi 32M passed
360mhz (DDR 720) 3-4-4-8-1T /2.9V Super Pi 4M passed
300mhz (DDR 600) 2.5-3-3-6-1T/2.7V Memtest86 test #5 passed 84 tests
360mhz (DDR 720) 3-4-4-8-1T /2.9V Memtest86 test #5 passed 53 tests
and here are the screen shots :D :D
All latest valid entries are added! Thanks a lot guys :toast:
@L@TrO
Post 32M screenshot, please...
bachus, I don't know if you will be happy :D or get mad :mad:, but I have another update to my result... DDR608 with all the settings the same except 3.0v and 23C of case temperature.
The weather here in Portugal may not be good for the beach as usually, but its sure great for overclocking :D
I'll post the screen later, because I have the felling that I may reach DDR610 in the next days.
EDIT: here's the pic
http://img96.imageshack.us/img96/3865/ddr6084gx.jpg
Settings: same as used on the DDR604 pic, but with 3.0v
Let's see if I can reach DDR610. Yesterday it bailed out at loop7. I have to loose the secondary timings a bit.
'bout that. In NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!:
Four double-sided sticks at 1T? I don't think so... Besides, take a look at their A64 tweaker screenies :)Quote:
Originally Posted by bachus_anonym
Just for the record, since it was already posted in my thread (which will be short lived unlike this one)
2x512 DDR610 2.5-3-3-6 1T 3.0v Superpi32M stable (ambient temperature 24C)
http://img131.imageshack.us/img131/6337/ddr6109oq.jpg
cpuz validation page (yes, I'm back from the Middle Age :D ): http://valid.x86-secret.com/show_oc?id=25709
DFI memory timings (from top to bottom):
200-E-2.5-3-6-3-16-22-4-3-2-3-2336-1-E-A-0-7-2-9-F-6.5-256-E-16-7-D
I think that this is the end of this nice story... until 3.1v kicks in... but not until the winter temps come back (I don't want to be greedy and ruin my sweet sticks).
Here u go 300mhz ddr 600 (2.5-4-4-6) 2T.......
I think i can get it tighter.
<a href="http://img296.imageshack.us/my.php?image=300mhz5bx.png" target="_blank"><img src="http://img296.imageshack.us/img296/4439/300mhz5bx.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
i have a new one
i never tried it again with 2.5-3-3-7 after i changed to 618-3 bios, but i needed a little more than what 2.5-4-3-8 could give me (trying to break a 14k CPU score in aquamark3)
i found some old settings, i think i got them here somewhere
anyways, my new high score
9x295 2.5-3-3-7 @ 2.83v
OCZ platinum revision 2 v1.1 TCC5 chips
does anyone know what the fastest TCC5 32m stable is? just want to see how close i am at
edit: forgot to put CPU-z in the first one's, so i ran 32m again, and have it in the 2nd screenshot
@bachus_anonym
Heres an update, DDR626. Using 0618-1 and 4200EL TCC5. Cheers.
http://members.shaw.ca/Eldonko/313-1.JPG
315x8 = 2520Mhz DDR630 @ 7-3-4-2.5-1T - DFI SLi-DR S939 (NF4 SLi) - A64 Venice - GeIL ONE Series TCCD PC3200
BIOS 7/04-3
Cheers
GeIL TCCD DDR600 6-3-3-2.5 Super Pi 32M
http://home.pchome.com.tw/club/qk472...02/A8NSP.5.jpg
http://home.pchome.com.tw/club/qk4723/270032mpass.PNG
Memtest86 3700+ 300x9= 2700Mhz DDR600 1T
DDR600 5-3-3-2.5 #5 1176 PASS 0 Erro
http://home.pchome.com.tw/club/qk472...5.1176Pass.jpg
DDR622 6-3-3-2.5 #8 45 PASS 0 Erro
http://home.pchome.com.tw/club/qk472...GTX/DDR622.jpg
3000+ 328x9= 2953Mhz DDR656 1T
http://home.pchome.com.tw/club/qk472...GTX/DDR656.jpg
3000+ GEIL TCCD DDR644 2.5-4-3-6 1T PI32M
http://home.pchome.com.tw/club/qk472...22/GEILONE.PNG
***Updated**
@Timothy730
Tighten it up, man! Get off 2T :D Also, what PDP exactly is that? PDP Patriot XBLK PC3200?
@qk4723Deluxe and qk4722
Thanks a lot for dropping by, guys :toast: Nice to see some great clocks with GeiL UltraX :thumbsup:
@qk4722
What mainboard is that? DFI Ultra-D ?
This thread is getting bigger day after day! Thanks to you, guys! Keep'em coming, please :toast:
yes DFI Ultra-D thx ! :toast:Quote:
Originally Posted by bachus_anonym
yes it is Pdp xblk pc 3200
I cant get 1t quite stable but i had 2.5-4-3-7 stable before when i had a winchester.
I just got my venice recently so im still working out the quirks in the memcontroller.
I think i might be able to get 305mhz of of em :)
just gotta tweak!
Tim
Dear bachus_anonym
Please Update My Record ~
Thx :)
GeIL One SE Power~
306x8 = 2449.1Mhz DDR612 5-3-3-2.5 Most Tie Setting !
http://home.pchome.com.tw/club/qk472...L.TCCDking.png
Geil One S PC4800 2.5-3-3-7 1T 292Mhz
http://img272.echo.cx/img272/7783/tccd32m29206ml.th.jpg
Here's my G.Skill LE's.
http://suckasd.com/computer/ddr600/perfectvolts.jpg
http://suckasd.com/computer/fx57/32mpi.jpg
2x512 gskill ff rams, i can do more mhz in my rams buy in lower multi like 9 or 10.
This is PQI Turbo Dual Channel Kit, PC3200 at 2-2-2-5, 2x512 at 301x9, 2.5-3-3-7. Other specs:
Board: DFI Ultra-D
BIOS: 510-3
DIMM slots: Orange
VDIMM: 2.8 volts
VLDT/VCHIP: 1.2/1.5
LDT: 4x
CPU: CABGE 0517UPAW San Diego
VCORE: 1.456 volts
The sticks max out at 308 or so at 2.5-3-3-7 but I picked 301 to try SuperPI 32M :).
I just noticed I'm listed as having my TCCD run at 334 2.5-4-3. Thats not right. CPU-Z is not showing that I'm running a 9:10 divider so that really only 300. Please make the correction. I wish my sticks did that but while good performers they are not freaks. ;)
There is a Oc database at DFI street.. This is my recent entry so I figured to post it here also.. Its not a very high mem oc.. but I think its a good clock for 4x512mb's.. ;)
short description:
264x11 @ 2904Mhz, 1.325v + 126%
4x512mb's @ 2.5-4-8-3 @ 2.9v vdimm
Genie BIOS Settings:
FSB Bus Frequency - 264
LDT/FSB Frequency Ration - Auto
CPU/FSB Frequency Ratio - 11
PCI eXpress Frequency - 100Mhz
CPU VID StartUp Value - 1.55v
CPU VID Control - 1.325v
CPU VID Special Control - Avove VID * 126%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.60v
DRAM Voltage Control - 2.90v
DRAM Configuration Settings:
DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Disable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 09 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled
DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 2
Max Async Latency - 8
DRAM Response Time - Fast
Read Preamble Time - 5.5
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)
==========
Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + A64Tweaker + RivaTuner vid clocks :
http://img239.imageshack.us/img239/4979/ocdb14mj.jpg
3dMark2003 + Everest + SuperPi 32m + MBM :
http://img239.imageshack.us/img239/1425/ocdb22cf.jpg
3dMark2005 :
http://img239.imageshack.us/img239/8466/ocdb37ix.jpg
Aquamark 3d:
http://img239.imageshack.us/img239/2048/ocdb42vk.jpg
==========
EDIT..
btw.. some of the images are cropped just because thats the way it needs to be in the database ..