Zippy700W...45A at 12V..

Printable View

Show 100 post(s) from this thread on one page

02-12-2005, 01:16 PM
jikdoc

Quote:

Originally Posted by moddolicous

In order to switch the fan, I think your better off just vutting the wires on the current fan soldering the new one in. I dont think you can just plug it in.

i don't want to switch the fan. here, this link might help explain what i want to do.

http://www.zalmanusa.com/usa/product...dx=70&code=017
02-12-2005, 02:45 PM
Dissolved

the internal zippy fan isnt standard 3 pin.
02-13-2005, 03:44 AM
hipro5

One LAST word is : This PSU ROCKS big time....... :D :toast:

VERY good design .......Can handle everythig you through it on...... :D

It can handle EASY :

A whole rig with a P4 3.8GHz Prescott @ 5200MHz at FULL load , PLUS the VGA ATI X800XT PE at 1.93VGPU and another 110 - 120 Watts at full load too.......PLUS 4 x DELTA Fans 12 x 12 cm 200cfms @ 2A each = 8A at 12Volts .....PLUS....... :D
02-13-2005, 06:20 AM
Nanobot

I'm happy you guys gave Zippy a try ,I dont feel all alone telling ppl it's a great PSU anymore .lol

Mine's been running great for...must be 3 years now I think.

On a side note: does anyone know if it's possible to convert the 8 pin EPS connector to a 6 Pin BTX one ?
02-13-2005, 06:46 AM
jikdoc

i'm not sure if this is what you need:

http://www.zippy.com/P_product_detai..._code=4P2TOATX

but you can search this page if it isn't:

http://www.zippy.com/P_Product_searc...=&pp_solution=
02-13-2005, 06:56 AM
Nanobot

Thanks for the effort jikdoc but none of these links have anything that could work for 8 pin EPS to 6 BTX.Oh well..
02-13-2005, 11:32 AM
Dissolved

Quote:

Originally Posted by Nanobot

Thanks for the effort jikdoc but none of these links have anything that could work for 8 pin EPS to 6 BTX.Oh well..

i couldnt find any 6pin btx diagrams.. did you mean 6pin pci-e connector?
02-14-2005, 06:42 AM
jikdoc

mod was a smashing success. the fan in the zippy is a 2pin plug. plugged in the 3pin fanmate into the correct pins on the pcb, then the fan into the fanmate. in needed to use an exacto knife to carve away bits of the fanmate so the fan would plug in securely. attached the whole shebang to the ouside of the zippy with velcro and voila! instant adjustable fan speed. the sound is MUCH lower and temps are about the same.
02-15-2005, 05:55 AM
Nanobot

Quote:

Originally Posted by Dissolved

i couldnt find any 6pin btx diagrams.. did you mean 6pin pci-e connector?

Yes,sorry. Somedays I'm a total moron,too much online gaming I guess...
:frag:
02-15-2005, 06:03 AM
Dumo

My Ultra-D and x850xtpe oc'd to the max.and delta fans 120' EHE.......ride on it with ease :D
02-17-2005, 03:44 AM
hipro5

In about an hour from now I'll upload photos for modding this PSU coz I'm in a harry right now...... :D

NOT very easy mods I must say....... :(

I'll link it....... ;)
02-17-2005, 03:54 AM
jinu117

Glad you guys are liking it :) Too bad I ain't using it nearly well enough now that I got off phase change cooling. I MIGHT start looking to downgrade PSU :P Nothing really wrong but I might be interested in lowering the noise tad bit more and easier on eye cabling. Haven't decided it yet though... :P
02-17-2005, 05:54 AM
hipro5

UP and running........ :D :toast:
02-17-2005, 10:18 AM
charlie

but WHY desn't the Zippy work with the DFI NF4??? What's the deal with the 5v rail incompatibly?????

C
02-17-2005, 10:25 AM
Sentential

Quote:

Originally Posted by hipro5

One LAST word is : This PSU ROCKS big time....... :D :toast:

VERY good design .......Can handle everythig you through it on...... :D

It can handle EASY :

A whole rig with a P4 3.8GHz Prescott @ 5200MHz at FULL load , PLUS the VGA ATI X800XT PE at 1.93VGPU and another 110 - 120 Watts at full load too.......PLUS 4 x DELTA Fans 12 x 12 cm 200cfms @ 2A each = 8A at 12Volts .....PLUS....... :D

Ye :banana::banana::banana::banana:ing ha. It had better be able to handle ANYTHING with 45 damn amps on the 12v+
03-18-2005, 03:32 PM
eva2000

guys does this psu work with DFI NF4 and the 5v vdimm jumper ?
03-18-2005, 03:37 PM
Torin

No.
03-18-2005, 03:40 PM
eva2000

thanks Torin :)
02-09-2006, 08:07 PM
fareastgq

Quote:

Originally Posted by Torin

No.

does this mean it does work with an ultra D set at 3.3 volts on the vdimm, but NOT with it set to get 4.0? I wanna get it, but not if it doesn't work at either setting. Little bit of clarification would be appreciated :)
02-09-2006, 08:18 PM
STEvil

yes.

The trick is to set the jumpers to the 3.3v+higher options setting (move the block down one jumper so the top jumper doesnt have anything on it at all) then adjust the 3.3v rail of the zippy so it is around .2-.4v higher than what you set in bios. You may need to place a single jumper on the singled-out jumper location, but I cant remember.. i'm sure someone does?

For example if you wanted 3.6v to your ram you would need the 3.3v rail at 3.8v to 4.0v

This may differ slightly on the Ultra D, but most boards step voltage down due to the regulator(s) so you lose being able to set exactly the same as your 3.3v rail is.
02-09-2006, 08:23 PM
fareastgq

thanks for quick reply, I'm not going to be running any bh-5, so I'll keep it on the 3.3, that should be fine for me then. HX prob won't take more than 3.1 volts anyway...
02-09-2006, 08:41 PM
Captin Insano

Very Nice Must get me one of these brutes.. How do they fair against the PC Pwr and Cooling 850w and 1kw.. Must be pretty close. Im looking for new unit and need the ultimate grunt in power.. Just not sure to go with Zippy, or the 850w PCP&C or the 1KW..Right now im using a Modded PCP&C 510 Deluxe SLI/ASL (in fact I have 2 one that has 12v/3.3v/5v mods and one that does not)

Show 100 post(s) from this thread on one page