Hmm, very nice board. At such low voltage 781MHz, so at reasonable 1.038-1.05V maybe board will work at ~870MHz.Quote:
Originally Posted by Buckster
Printable View
Hmm, very nice board. At such low voltage 781MHz, so at reasonable 1.038-1.05V maybe board will work at ~870MHz.Quote:
Originally Posted by Buckster
Yolanda I was slightly out - its 0.975 stock - but still not bad really
http://www.mark-buckley.pwp.blueyonder.co.uk/570-A.jpg
Still nice, my reference can work at 781MHz with rather high 1.05V, because default VID is 1.038V ((
I tested the same with default 0.967V, it can work at 844MHz with 1.038V, so 8% less voltage, 8% more clock :)
Board with 0.975V, as yours, can work at 844MHz with 1.05V.
yeah seems fine - 825 and 2150 on the mem at 0.988 volts - can't grumble at that
Same card, cooler and volts as you Buckster.
In the UK it's so much cheaper than other 570s, and barely any more than an expensive 560Ti, making it a total steal.
Working mine up to around 860 core at 1.05v stable.
:) glad to hear unclean
how you finding it noise wise - its not too bad really ?
interestingly memory clocks seem to be related to the GPU core volts .... as mine wouldn't go above 2125 without artefacting at stock volts, but with a volts bump - 2200 was perfectly stable
Tested each vanila 570 individualy and they have just a 10mhz dif on core at same volts for 24/7 amazing cards
first one is cherry its 0,950 vid and does 950 easy and more second dont go above 890 but for being normal ones im very pleased
runing SLI 16/8
http://img25.imageshack.us/img25/1323/sliv.png
cheers !
Sergio
http://img46.imageshack.us/img46/538...cegtx570ne.jpg
Gigabyte GTX570 900/1800/2000 1.025V ,stable 24/7 :up:
nice :up:Quote:
Originally Posted by Shoty
EVGA GTX570 vanila 24/7 stable 950/1900/4000 @ 1.125 :up:
proof
http://img88.imageshack.us/img88/9118/captura3e.png
Uploaded with ImageShack.us
Careful with that vGPU man, or the question I will ask is how do you like your mosfets, rare, medium or well done? :D :p:
i think well done lol :up:Quote:
Originally Posted by CryptiK
hello guys , i need help , i buy msi gtx 570 standard version , with vid 1.00V , on stock voltage i can do 800/1600/2100 , but after is problem i can't get 900mhz stable even on 1,1V for 850mhz i need 1,088V , this is :banana::banana::banana::banana: card or mayby i must unlock something ( only for games i dont use furmark or kombustor )
this is with my new batch of 2600K my second 570 dont past over 890 so i sold it and will get a SC one, my first is cherry is 0,950 vid and does 950 easy
http://img192.imageshack.us/img192/4...3c7vantage.jpg
Uploaded with ImageShack.us
26 k @ 4.5 gh + 570 sli @ 900/1050
http://img849.imageshack.us/img849/2479/9001050.jpg
thats nice Gaul see my second 570 don like 900 core so i use 890 i will swap it soonQuote:
Originally Posted by Gaul
what kinda voltage are u guys running 24/7? i have mine @ 1.05v
Since I absolutely can't find any reviews for this card, here's a question for you:Quote:
Originally Posted by Shoty
is it 6+8-pin? Can you check if it's a 4 or 6 phase design?
this chip unleash the cards on such way :D
http://img820.imageshack.us/img820/3...3c7vantage.png
***i use stock 0,950 volts for this vanila cards, no need for more on SLI they run all games at max settings
Cheers !
Sergio
@ ^ = nice, it's beats gtx 580 SLI def
GTX 580 SLI def
http://img508.imageshack.us/img508/7564/vanv.jpg
thanks Gaul :up:Quote:
Originally Posted by Gaul
so happy i picked another vanila 570 and got the same vid as the first one 0,950 this is my first 3dm11 at 1,1 didnt try more clocks
http://img560.imageshack.us/img560/5...33c73dm111.png
Uploaded with ImageShack.us
cheers !!!
Sergio
@ ^ = once again, beat my gtx 580 SLI def.........................very nice score u got there
http://img198.imageshack.us/img198/6391/2011y.jpg
thanks Gaul but you are at stock lol dont pump up :DQuote:
Originally Posted by Gaul
my second test at 1.1 cards keeps going up this time on mem
http://img825.imageshack.us/img825/8...33c73dm113.png
cheers !
Sergio
here is single Vanilla 570 @972/1944/2099 1.1v
http://img710.imageshack.us/img710/348/p6727.jpg
@Sergio can you provide link for 270.28
Thanks
Eric
great Eric :up:Quote:
Originally Posted by coolhandluke41
use 270.51 instead i tested all works as a charm
but here links for all thanks to guru3d forums
270.28
http://forums.guru3d.com/showthread.php?t=341375
270.32
http://forums.guru3d.com/showthread.php?t=340247
270.51
http://forums.guru3d.com/showthread.php?t=341729
have fun they all perform awesome on our 570's i tested all but try .51
Great scores guys, those 570's in SLi pack a punch :up:
Quote:
Originally Posted by p2501
power is 6 + 8 connector
how do I know whether they are used in stage 4 or 6 phase? . I do not want to give the bottom cooler
thanks Cryp :up:Quote:
Originally Posted by CryptiK
C2D E8400 3.0Ghz / 4.2Ghz 1.384V
6Gb Ram DDR2 / 935 Mhz Corsair Dominator
Asus Maximus Formula X38
Gigabyte GTX570 900/1800/2000
Driver forceware 270.51
win7 64bit
Score:
5 024 b
http://img508.imageshack.us/img508/7...cpu4200mhz.png
3dmark11
C2D E8400 3.0Ghz / 4.2Ghz 1.384V
6Gb Ram DDR2 / 935 Mhz Corsair Dominator
Asus Maximus Formula X38
Gigabyte GTX570 900/1800/2000
Driver forceware 270.51
win7 64bit
Score:
5 024 b
http://img508.imageshack.us/img508/7...cpu4200mhz.png
nice evga chips! :D
why do not we open a 3D 3dmark 2011 570/580,we do not have one yet
awesome performance sergio! those killer 570 are the object of my envy :D
off: lol'd with your new avatar!!
thanks mates :)
lol new avatar you remember that episode lmao
Nice , I see thatQuote:
Originally Posted by andressergio
Nice card and nice vid:D
thanks vern :up:Quote:
Originally Posted by vern
passing 12k yeaaaa this 570 are awesome !
http://img684.imageshack.us/img684/7069/51053dm111.png
Uploaded with ImageShack.us
cheers !
Sergio
WOW almost pass my gtx 580 SLI @9 00/1100 :up::up:Quote:
Originally Posted by andressergio
http://img231.imageshack.us/img231/1193/2011w.jpg
thanks Gaul :up: love this cards :DQuote:
Originally Posted by Gaul
great Malik :up:Quote:
Originally Posted by Malik
My target: 67xx :)
Malik, was that under water?
why aren't more people using 3DMark11? These are made for that benchmark, Vantage is too easy now and doesn't use all the features of the 570.
Yes, all set on water.Quote:
Originally Posted by mattlef
Thanks Sergio !:up:Quote:
Originally Posted by andressergio
here is taste of a different animal ;
http://img864.imageshack.us/img864/2...o203325k50.jpg
i7 2600K stock cooling
ASUS GTX 570 Stock cooling
955/1910/2130 1.1v
http://img691.imageshack.us/img691/5...1bestscore.jpg
I found this gf110 can run pretty fast on the clock 925MHz/1008 with 1.1V
DA GTX 570 default cooler + i7 2600K
http://i51.tinypic.com/29bitqo.jpg
http://i56.tinypic.com/w2rgh.jpg
http://i55.tinypic.com/2mynvdh.jpg
EVGA GTX 570 SC + Backplate + highflow bracket.
http://img546.imageshack.us/img546/7100/ocbestscore.jpg
ORB: http://3dmark.com/3dm11/1273233
seba84_2005 -very nice clocks !!]
I guess you are not worried about VRMs and that voltage ?
OCP watching my GPU :D
Evga sc full EK .
http://i23.servimg.com/u/f23/12/23/45/17/rec_2012.jpg
For now, my best score:
http://www.abload.de/thumb/thebestof570sliuqsb.jpg
http://img198.imageshack.us/img198/7158/7373.jpg
small news ,probably already posted ;
http://www.hardwarecanucks.com/news/...hd-classified/
great results guys !!!
cheers :up:
Sergio
Nice
I've never used Afterburner with SLI before.
I'm running 275.33 drivers and even if I go into settings and unlock voltage control & monitoring, I still can't bump voltage? What gives?
One other question. How safe is it to voltage bump these cards? I know a lot of people complained about them dying. BTW, I'm running two MSI GTX 570 Twin Frozr III cards.
Without a voltage bump, I can't really go past 810 or so core clock w/o instability. :(
what exactly are u trying to gain by over volting? seriously..are u just trying to achieve a benchmark score? or do u game and want higher fps...cuz im looking at ur specs and ur system is just fine without risking catastrophic failure
Guys short question:
I have two 570's from asus. Both have evga bios ( the same ). And in 3d load one one them has 1.0V and second 0.988V Why ?
http://www.abload.de/thumb/beztytuu47a2.jpg
Just trying to figure out why it simply won't allow it.Quote:
Originally Posted by pythonse
Trying to OC the cards at this point is fruitless. 770 core can OC to about 815. Seems really really low.
If the lack of unlocking voltage is due to a driver issue or something, that might explain my lousy OC @ stock volts.
Broke 12K easily. Not bad for a n00b. :D
http://i55.tinypic.com/bvoer.jpg
i7 2600K @ 4.9ghz =H2O
GTX 570s = Air
nice :up:
Excelent work man!
Congratulations!:up:
Thanks guys.
I can pump the memory settings from 2000mhz to 2125mhz and run 3Dmark with tearing and pass, but my score only jumpes to 12270.
I either need to push the cpu well past 5ghz or get a 3rd 570 to break 13000 as these cards won't handle much more of a higher OC unless I voltmod.
Hi all
Long time no go to XtremeSystem
Because secondary 5 is really busy
Well
today I try to oc Inno3D GTX570
This card is really nice and strong
Room Temp : 25 , Standard Stock Cooling
Easy to oc to 1000Core 2300Ram @ 1.088V , really nice
But this moment , only have 1090T@3.8GHz , so rubbish:down:
http://holland.pk/9Xp
Broke 12,500 points. I think I pushed these cards as hard as they'll go w/o volt modding. Pretty happy with my score!
Attachment 117606
nice score :)Quote:
Originally Posted by [XC] Synthetickiller
Hi guy's
Is 1038mv a save voltage for the evga gtx 570 superclocked. The reason i ask this because with the oc settings the card came i had driver display crashes back to desktop. Upping the voltage to 1050mv solved the crashes and artifacts even playing 5+hours, before that i used 1025mv which wasnt stable. But 1050mv seems to high for my liking. So i changed it to nvidia stock speeds that helped also but i payed for the SC version. So i returned to the factory oc setting that came with the card except i upped ONLY the voltage as seen below:
Core voltage: 1038 Mv (it came with 1000mv)
Core clock: 797 Mhz
Shaders: 1594 Mhz
Mem: 1950 Mhz
So is the above setting with 1038mv a save voltage i know the card has a maximum voltage of 1100mv. But just te be sure i'm asking this to you guy's. I'm aware that lots of people had issues with the 500 serie it, even rma'ing it seems not to solve it in some cases. Seems the oc versions have inadequate voltage imo. This could be fixed with an bios update...? I'm only interested in stability.
ps: Core i7 920(do), evga x58 sli le, 6gb mushkin ram 1600mhz, corsair ax850, watercooled cpu and gpu.
Thanks in advance.
Hi everybody!:)
I have a gtx 570 Palit and I would like to ask: how can I bump the voltage over 1,1v?
Now I can run on clock 950/1100 with 1,1v and I need more voltage to go over 950mhz:D
Thanks in advance!
Here are the results at 950/1100 on 3dmark vantage:D
Attachment 118049
My second GTX 570 arrived today!
The first results on 3dmark vantage and 3dmark 11:
Attachment 118519
Attachment 118520
I think it's good for a start!
I get 10k at full stock in 3dm11:
http://3dmark.com/3dm11/1497479
And 12k with mild oc:
http://3dmark.com/3dm11/1559463
In Vantage I get 34k at stock clocks:
http://3dmark.com/3dmv/3299939
And 41k with mild oc:
http://3dmark.com/3dmv/3340401
full asus full koolance
http://img35.imageshack.us/img35/9889/benchg.png
http://img534.imageshack.us/img534/9398/bench2t.png
nice stob but why the ram in 2T ?
for me , evga sc 570 full EK ,
test with 270.61 :
http://i43.servimg.com/u/f43/12/23/45/17/570_re10.jpg
test with SB driver 275.33 :
http://i43.servimg.com/u/f43/12/23/45/17/vantag10.jpg
with 980x and 275.33 :
http://i43.servimg.com/u/f43/12/23/45/17/lo11.jpg
the best drivers are the 270.61 on vantage and the best on 3d 11 are 275.33
Vantage no any effect 1T or 2TQuote:
Originally Posted by enkie
the ram is given for 2133 1T ;)
If someone could give some input that would be greatly appreciated. Is there anything wrong with this PNY GTX570? I was thinking about picking up two of them instead of one GTX580. I normally ALWAYS and only buy Evga, but want to save some money, so should I go against my norm?
http://www.newegg.com/Product/Produc...401&Tpk=gtx570
Didn't want to make a new thread just for this.
i tried zotac, pny...both are still reference..thats a steal right thur
what are the highest vGPU people are pushing here?
mines a reference EVGA card, under a Koolance waterblock, will benchmark at 940-950/2200 at 1.1v (highest it would go at stock).
i've now modded the bios and flashed it to the card, and it will go up to 1.213v, successfully ran a couple of 3dMark11 runs last night at 1000/2200. No issues, but i did hear the card make a whining noise. i assumed this is what people refer to as "coil whine"
was wondering, since the card is underwater, how worried should i be regarding the noise my card is making? im only running the high vGPU for benching, not 24/7 use.
highest score so far is a shade over P7100, with a 4.5GHZ i7 920. beat that guys ;)
gtx 570@970mhz core with stock cooler :D
This is my best score at 3dmark11 for now!
http://img571.imageshack.us/img571/5792/3dmark11x.png
Uploaded with ImageShack.us
Yesterday bought GTX570 SOC
http://img267.imageshack.us/img267/8497/3d11570soc.jpg
Seems to be running quite well ;)
PNY are ok assuming you don't mind the fact their warrenty isn't usually worth the paper its printed on.Quote:
Originally Posted by TheCarLessDriven
Anyone have any recs about the msi gtx 570 super frozr III? http://www.msi.com/product/vga/N570G...#?div=Overview
Looks like a better build with 6x Vreg, better grade caps, quieter and decent air cooling, stocks at 770/1280/2000. Its also more $$. My purpose is 3D gaming with the ability to improve the system with time, eg start with one card and go to SLI when have the $$ so I'd like to have 2 matched ponies that will OC in step. Have the watercooling if needed but was considering air for gpu's. Any thoughts, experiences, words of wisdom??
I need some advice for overclocking my 570. How much I can raise the voltage on the gpu and for testing stability are games like BF3 best? Afterburner says that the stock voltage is 1.0v (800/2000MHz clocks).
Dude please don't spread misinformation. Their warranty is just fine, obviously if you want EVGA style warranty then I suggest that is the brand to go with. Just a quick fact for you - PNY is the ONLY manufacturer for nvidia for their Quadra cards. I think that says something.Quote:
Originally Posted by Ket
I have been running 1.1V on my reference EVGA for months now with 900 core and 4500 mem(1125 or 2250, however you want to read it).Quote:
Originally Posted by Nazu
1.0 for 800mhz is quite low, if your stable at this V, you have a good GPU :)Quote:
Originally Posted by Nazu
@stock, one of my Asus was .980 and the other was 1.025... Currently running my SLI at 800 with ~.1050.
I have a EVGA GTX 570 Classified and i need in BF3 1.070 for stable runing with 850Mhz
The stock clocks are 800MHz for the core with 1.0v.Quote:
Originally Posted by Boulard83