All the 6870 are now reference cards with the same CHiL voltage controller so definitely yes.
Printable View
whats safe temp for 24/7 and bench?
Hm
TriXX dont work with my Sapphire 6870 CF
Work TriXX by Anybody?
why not use MSI afterburner??
Beta 3 has been out.... :p:
Sapphire Radeon HD 6870
http://img600.imageshack.us/img600/248/img0183r.jpg
voltset 1.3v
http://img248.imageshack.us/img248/5...065124413v.png
yes B3 supports 6870. ;)
2x6850 crossfire 970/1100 1.25v with trixx b3
http://img253.imageshack.us/img253/993/26286148.jpg
Little playing with 6870. CPU and GPU on cold water. Tomorrow some more volts to GPU :)
http://i9.aijaa.com/t/00152/6988141.t.jpg
@Strategos
How do you get TriXX to run?
1045/1220 1.25v
http://lh5.ggpht.com/__kWMq6RC_lg/TN...emark_best.png
max on triXX 1.299,
btw here update !
v1.231 @ 1050/1150
http://img573.imageshack.us/img573/7093/10501150.jpg
Single 6870 @ 1075/1150
http://img263.imageshack.us/img263/8248/10751150e.jpg
CF 6870 @ 1040/1150
http://img168.imageshack.us/img168/9897/cf10401150e.jpg
nice......
more !!
6870 @ 1070/1150
http://img89.imageshack.us/img89/1457/11701150.jpg
guys. what about those missing pci-e 6 pin mole on most of 6850? could there be any benefits of reattaching it?
@ henry = not bad.....i like it.....:clap: :clap: :clap:
anyway....
more again plzzzz !!! :up:
6870 @ 1085/1175
http://img695.imageshack.us/img695/7383/10851175.jpg
FASTER PLZZ.......!!! :sonic: :sonic: :sonic:
http://img27.imageshack.us/img27/2346/10901175.jpg
My card maxed out at 1080/1190 (stock hsf), and i dont have time to play with watercooling), so this is my final score :
http://img340.imageshack.us/img340/6662/gpu18839.jpg
*) Tancep gas aja, gak ngejar lg gw...
Possibly, with another power connector supplying an additional 75W of power on paper to play with. Look around the power phase area too, the PCB mask for the missing power phase (3 in 6850 vs 4 in 6870) is there too... btw, this is all paper speculation of course. :)
nice vantage run with my HD6850...1120/5100 (1.27v)... :)
http://www.xtremeshack.com/immagine/...nglehd6850.jpg
Seems i have a 'dud' card... I can only hit 975core 1050mem @ 1.3v :/ Anything higher just freezes computer
Its a little disappointing because Ive been so lucky with good AMD hardware in the past unlocking and OCing
(I was one of the lucky peeps who had a 'hidden' 8pipe 9700Pro locked away in my 4pipe 9500 hehe)
ah well 5 fps in games isn't going to bother me much
Sapphire 6850 w/ TriXX
how does crossfire 6870 compare to gtx 480 in sli for vantage scores?
Nice !
Mine@1125/1200
http://i82.photobucket.com/albums/j2...80x/p20664.jpg
Same score:D
Who has already installed CF HD6870? Please, show the results in games: Metro 2033, Crysis WH, BattleField Bad Company II...
is Visontek a good company?
http://www.newegg.com/Product/Produc...-166-_-Product
anybody have one or have past experience with them
looks like they give a lifetime warranty
its the cheapest one on newegg right now
oh!...nice 05... :clap:
but..
http://www.pctunerup.com/up/results/...single6850.jpg
:D:D
My 6870 on stock air max is 1010/1280 (with vMEM mod) for Unigine
http://hwbot.org/community/submissio...6.9_dx11_marks
What temperature?
my room temperature? around 22C i guess
tested :D
http://i82.photobucket.com/albums/j2...3dm0538750.jpg
ur next :D :D
Shall i start to play? ;)
OMG.... cold front in South Florida!!! LoL
http://img263.imageshack.us/img263/4...751190x211.jpg
:mad:
will have to test again... :D:D
up 06...:p:
http://www.pctunerup.com/up/results/...SINGLE6850.jpg
@ ALL = more HOT, okay i'll will make table on VANTAGE only......
anyway TOP TEN ( GPU SCORE ONLY ! )
6870
#1 Gaul-------18.959------6870 @ 1090/1175
#2 Henry------18.839------6870 @ 1080/1190
#3---------#10 soon......
6850
#1 BULLUS-------17664-------6850 @ 1125/1200
#2 DELLY--------17625-------6850 @ 1120/1275
#3---------#10 soon......
GPU Score 17683 with 1122/1275... :)
http://service.futuremark.com/compare?3dmv=2685040
05??? mmmh...
http://www.pctunerup.com/up/results/...single6850.jpg
:D:D
i guess this can be added - 20,992 :P
http://hwbot.org/community/submission/1075205_
wow T_M... :slobber:
Bagus betul :up: Volts?
18027 :D
http://i82.photobucket.com/albums/j2...teaser1150.jpg
Can u update it to first post? easier to find in the future
http://hwbot.org/community/submissio...50_39509_marks
:D :D
http://hwbot.org/community/submissio...50_30156_marks
1.299 using trixx for that run.
And thats not the fastest one it could do ;)
see my reply ;)
6870
#1 T_M----20.992------6870 @1250/1270 ------LN2
#2 Gaul-------18.959------6870 @ 1090/1175----------STOCK HSF
#3 Henry------18.839------6870 @ 1080/1190---------STOCK HSF
#3---------#10 soon......
6850
#1 BULLUS-------18027-------6850 @ 1150/1200-----WATER
#2 DELLY------------17683-------6850 @ 1125/1275--------WATER
#3---------#10 soon......
06
SAPPIHIRE
1070/1250 1.3v air
CFX 6850 water
http://i82.photobucket.com/albums/j2...80x/P33265.jpg
1120MHz is very nice, congrats! :up:
Tnx,
I'm trying to get cfx overclockin working in xp, but when I change 0=1 (unofficialoverclocking msi ab) and change the registry ulps=0 and try to oc with msi ab, it doesn't work.
Somehow on 1 gpu I see no clockspeeds. Did this also in W7 but no problems there.
i'm having trouble overclocking my pair of sapphire HD6850 via AFB 2.1 beta 4 :(
getting loads of BSOD's.
gonna try to reinstall catalyst and then report back but would be interested in kowing if anybody else had this issue.
Disable ulps
http://forums.guru3d.com/showthread.php?t=327291
checked regedit... values where already at 0 :(
reinstalled drivers and still bsod...
btw, the first test i made i managed 910MHz on stock voltages rock solid (tested with OCCT GPU).
then, when i started testing the memory i found this problem :(
thanks anyway, will keep trying.
--edit--
tried with sapphire trixx.. still not able :(:(
05 test whit MSI BIG trinergy I7 860 watercooling 4.6GHZ whit HT on
SAPPHIRE 6870 1100/1244 air cooling stock cat 10.10B
http://img695.imageshack.us/img695/2...dh68701100.jpg
Looking nice my freind now go put that singelstage on that Gfx card !
This is XFX 6870
overclocking on Standard Stock Cooling:D
Ok, so I have been playing with my XFX HD6870's and unfortunately I cannot adjust the voltage with MSI AB nor can I go above 1000Mhz on the GPU and 1250 on the memory. The best I have been able to do is 1000Mhz on the GPU and 1223Mhz on the memory before I start getting stuttering during a vantage run. I am assuming this is at stock voltages since I cannot adjust that. However, I have ran into another issue besides the ones mentioned above. When I do a full Vantage run (not just GPU tests) Vantage will error out with some strange code that I haven't been able to find via Google, I will have to post it later, but it only happens on the CPU tests. I have tested my overclock via OCCT Linpack and it passed two different times. I have the latest patch of Vantage, so if anyone has any ideas any help would be great. Also, if I do the "EnableUnofficialOverclocking" mod to MSI AB, will that enable voltage adjustments also? I remember on my HD5870 I had to flash it to an Asus bios to achieve this, but it would be nice to not too have to do this.
By the way, this was my 3DMark06 run I did at 1000/1223:
http://service.futuremark.com/compare?3dm06=14992934
Score was 27860
So I can do full runs in 3DMark06, just not Vantage.
Here is my GPU only test in Vantage at the same test:
http://service.futuremark.com/compare?3dmv=2707388
GPU score was 30530.
See ^^
Voltage control
http://i34.photobucket.com/albums/d1...rburnercfg.png
Already disabled ULPS. Going to try the Beta version of MSI AB later tonight. Still not sure about the CPU side failing in Vantage though.
When u downclock the cpu a bit, will it pass cpu-vantage?
It does, but since I passed OCCT Linpack twice, I figured the CPU was stable enough for Vantage runs, plus it can do 3DMark 06 at that speed with no issues. I will post the code I get when it fails, hopefully someone will know what it means.
Thanks again for the help Bullu$.
Here is the error code:
Function:_thiscall eva::physics::novodex::system::system(void)
Any ideas?
Tried reinstalling Vantage, but same issue. From what I have read it's a physx issue, but I am not running Nvidia cards anymore. I did a driver sweeper before installing my ATI cards twice just to make sure all Nvidia drivers were gone, but I am not sure what I need to do about this.
ah they old nvidia to ati card problem rears its ugly head...not sure what to do, research issue stemming from running nvidia then switching to ati cards. sorry thats probably not much help
http://www.google.nl/search?hl=nl&so...=&oq=&gs_rfai=
Did u installed the patch for vantage?1.02
Try to diable ppu in the settings for vantage and cpu test Vantage is a lot "heavier" than 3dm06.
So downclocking your cpu is ok?no errors?
Yeah, I have a score from just stock, so it must not have had any errors. I have ran about 20 tests so far. Got the beta MSI and did the trick you said to do, so now I can go above 1000/1250 on the overclock, so far just did 1050/1223, but I will play around with it tomorrow, got a sick kid to deal with tonight. As far as the error goes, I have an idea I will try then too and I will retest it at stock, just doesn't make sense that it would run at stock and not overclocked on the CPU unless it was unstable, but Linpack should have shown that.
Thanks again everyone.
drop the score up on http://hwbot.org/ Plz :)
liking this card alot better than my 5770, it has been a great upgrade so far and i can play games more smoothly...especially metro 2033 :p
still feeling my way around the 6870, i havent had to much time with it yet... i like the afterburner voltage monitoring and
when i overclock it still backs down to low power in 2d desktop mode (100/300) nice!
now my fan wont ramp up when im in the desktop :p
HIS 6870 @ 940/1100
http://farm2.static.flickr.com/1376/...c8b881eb_b.jpg
900/1100 crossfire 6850.
finnaly can play BC2 at 5760x1080 without fps issues.
nice
thanx, here : 1GH/1150 furmark test for 1 hours :up:
http://img89.imageshack.us/img89/6345/10001150.jpg
I use cat 10.10d what you use ? (all)
I ran a test with EK vga block yesterday, it gave no more room to oc a 1110 which I can run with original cooler, just make a temp load 54 load, instead of 74 at high oc on air.
OC'in my HIS 6870....right now i have it set at 1.225v 1000/1150
how do i get it to downclock when im in 2d desktop mode? its stuck at the above settings
im using msi afterburner 2.1 beta 4
i have 10.10e hotfix installed
edit:
http://farm5.static.flickr.com/4127/...6004a3c2_z.jpg