Project : L3p D3sk

Got a nice package today :

http://www.l3p.nl/files/Hardware/Spo.../EKWB_logo.png

Gregor pwns !!


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Oops, something went wrong here, to be continued (my bad) :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Original

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


I need more bling bling :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Again, thanks Gregor for the lovely blocks !!

http://www.l3p.nl/files/Hardware/Spo.../EKWB_logo.png



Thanks for placing me at your mod page @ Custom PC Magazine ! :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.jpg

To keep you guys updated ..

Couldn't do anything this weekend cause of 2 little problems.

First of all off course the wrong EK RAM Dominator block.
Hope i can send it back this week for the plexi version :)

Secondly, the Silverstone Strider ST1500 kept giving problems.
Even after replacing the fuse from a B16 to a C16.
It kept rebooting, sometimes after an hour, but also sometimes when booting.
Tried all possible combinations with the 2x 25A for all the hardware.

I could borrow an XFX Core edition 850W temporary (Nice thing btw full OC and full stress 1050 watts from the fuse)
The Strider goes RMA, ordered something else back.
Going for a "Single Rail" psu again.

Also the 2 x 80 Gb Intel X25m 1st Generation ssd's are sold.
Going to be replaced with something else too.

So next week alot of work to do.


The strider couldn't hold it :(

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Found this at work.
I want to use it for the Reservoir, move it over the old RVS studs

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


This is how ill be sitting behind the desk this week :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Ordered @ Highflow.

http://www.l3p.nl/files/Hardware/Des...bestelling.jpg

Small update !

Couldn't wait to start yesterday.


Yep, i like the new one more .

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Rather have plex.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Ordered to see what it is, green fan and a Lamptron 22mm Blue led momentary.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Looks very good. Pushing goes softer then a "real" Bulgin.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Something i wanted to do a long time.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Wtf ? :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Lets clean that up too.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And done.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And this afternoon @ the door ..
Wtf alreadyl ?!
Thanks Gregor from EKWB :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

No one could have told me there's a trick to hold the rubber in place ? :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Totally happy again !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Thanks EK !!

http://www.l3p.nl/files/Hardware/Spo.../EKWB_logo.png



If you guys want to be so kind ... Please vote for me here :)
I can win a trip to the Asus HQ in Taiwan. ^^

(Registration only takes 15 seconds, after that you can vote every day one till 30 Januari.
And you can win a prize every day yourself :P )

http://www.igniq.com/wp-content/uplo...ide_041110.jpg

Nice going there L3p. I've been following your build on Tweakers.net, but had no idea you were posting here as well. I'll vote for you when I can.

Veel succes!

Dank je Mazlov ! :)


Finally the pc is running again :)

So here after a very busy week (Asus Pride) the update.


First of all i want to thank these 2 people for making this update possible !

Freddy van Highflow.nl
Gregor van Ekwaterblocks.com



Some new pc tools.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Back to Corsair :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Nice sleeved cables.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


100A !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


First i thought they were made of plastic, but im glad they are aluminium.
Also nice there are 3.5" brackets with it.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Such a nasty job this ..

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


4 hours later ..

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Another 4 hours later :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Leak testing

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Now without stud.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Gold status now :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


I love it, also a better flow then the other blovck

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Lamptron ddr3 slots :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Transformers !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


I liked the ssd's there more.
Also temporary used the plexi's from the Intel ssd, somehow i liked it.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Some benchmarks with 2 x Corsair F60 in raid0

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.jpg


Up and running !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Temps also lowered another 1-4 degrees compared to the old block.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.jpg


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Beast in his cage

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some random pics..

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Lamptron Pci-e covers.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


I love EKWB :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Thinking of using 6 of these inside the desk.
(Others will remain Scythe GT's)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Total picture.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG




Thanks alot, both of you guys !

http://www.l3p.nl/files/Hardware/Sponsorlogo/hflogo.jpg
http://www.l3p.nl/files/Hardware/Spo.../EKWB_logo.png

Very nice job man.

Got a nice package today ^^

Some guy named Wwwicked i know from the Highflow forums creates selfmade ledstrips.

We were both curious how they would look in the desk.

First of all, very professional wwwicked !

Specially for him double resolution pics :)


http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

25 and 90 degree leds

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

One Ledstrip is UV25-UV25-Bl25 the other UV25-UV25-Bl90

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG


These pics were for myself :)
This is the effect you get with wwwickleds !

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG

http://www.l3p.nl/files/Hardware/Des...%5b550x%5d.JPG



Wwwicked, thanks man !

http://www.l3p.nl/files/Hardware/Spo...icked_logo.jpg

insane :)

Great job it looks great!

I love that dominator WB! Great build. I don't have a large enough vocabulary to fully express the awesome contained within this build so I'll leave it at that. :up:

Small update.

Thanks Freddy !
Without Highflow this wouldn't have been possible :P !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Wanted to connect the extra ssd when i had 10 minutes spare time, but ...
Both multilane cables i had connected were full :(
So had to drain the loop AGAIN so i could add an extra multilane specially for the ssd :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Still need to think of something to make it look better.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Very satisfied with the speed, i guess i can't get more out of it cause of the iop341 limitations.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.jpg

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.jpg

Thanks Antony !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Not a huge fan of all the bling...other than that, this is one of my favorite builds of all time....very nicely done l3p :clap:

The best part of this build is how clean it is. Absolutely amazing. Great job chief! Very envious!

Sneak preview :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Good news :)

1. Highflow became Main sponsor of this build !
(More info will follow :P )

2. EKWB will send another nice package.
(Also more info will follow)

3. I won a nice prize with the Asus Pride contest.

4. Asus Sponsored me a videocard. (This videocard may be sold to buy the Asus card i wanted, other samples weren't available at this time :) )


So the next days alot of pics will follow.


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG



Thanks Asus !

http://www.l3p.nl/files/Hardware/Spo...Logo_Metal.png

Another small test :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Found some time today to cleanup the Asus 5790.

Temporary on an Asus EN210 till the other hardware comes, who needs WC :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


After that it was time to get the third screen hanging

2 hours of measuring, fitting, mounting, unmounting and everything again :)


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Oooooo...that's a nice monitor you have there! ;)

After 3 weeks of mailing with Asus, Highflow and EKWB, finally some pics for you guys.


After building this in im ready with the hardware part, and hope to finally enjoy a game :)

Off course it still needs to be powdercoated in mat black in the comming weeks/months.
I hope to finish off this project then.

I specially want to thank :

http://i28.tinypic.com/wb3oef.jpg

This because they did a very nice sponsoring.
Without Highflow i could never made this SLI dream true.

Freddy en colleagues thanks !


http://www.l3p.nl/files/Hardware/Spo...Logo_Metal.png

For the Asus Rampage III Extreme i won in the Asus Pride contest.
And for the Asus GTX480 i could use to order some other Asus cards @ Highflow

Milan en colleagues thanks !


http://www.l3p.nl/files/Hardware/Spo.../EKWB_logo.png

This because he's sending me a very nice package for the second time this month.
Im totally in love with the EK Plexi blocks !

Gregor and colleagues thanks !


(Thinking about marrying Freddy, Milan en Gregor)




Planned to do a lot, but i just kept staring :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Totally in love with the Asus GTX580

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Thinking to place them in a rack like samurai swords ;)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

One can't live without the other..

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Pretty big plates :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Replacing the standard red top with a black one.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Bling !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Bling Bling!

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Nicest block i had till now

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Can't wait to mount them :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Playing with the Lamptron UV-active Slot Protectors

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some stuff to put the cards in SLI.
Also some extra BP parts can be quite handy.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


To clean up the dirty little chips.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


More pics will follow, i hope you enjoyed them :P

Very cool idea, makes me want to try something like that using acrylic.

http://i51.tinypic.com/2e4etfp.jpg

Sorry if this is a silly question & i passed it some where..
What are the size's of your LCD's ??
i would love to do a setup similar.
Using my current 24" i wont to match up 2 smaller screens in portrait mode like u have it & get it as close as possible for them to match..
Thanks in advance. Cant wait to all the new hardware is in & running..
Looks super sexy. :up:
Keep up the great work.


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG[/QUOTE]

No problem :)

Dell 17" - Dell 27" - Dell 17"
4:5 - 16:9 - 4:5
1024x1280 - 2560x1440 - 1024x1280

Here some pictures of the conversion.

First of all, thanks again Highflow, EKWB en Asus !


Even on air they are lovely.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


But i love WC blocks :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


You can easily spend a hole evening on 2 cards.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And thats 1

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And thats 2 :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Had a small break, had to wait for a replacement part for the EK rex3 block (broke while shipping)

And i've been to Cebit to personally thank one of my sponsors :)

http://www.l3p.nl/files/Cebit%202011...%5B550x%5D.JPG


Replacement part came in the next morning :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Quite an impressive block, it has 4 O-rings in it

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And now the adjustments for the bigger mainboard and the extra needed cables for the gpu's

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Had to do everything by hand cause i didnt want to clear the hole desk

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also the mainboard tray needed some work.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Discs specially aluminum.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And done.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Now i can start fitting in the Bitspower parts

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Every SLI connector has to fit exactly.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


One of the many times fitting it in the desk.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Only one connector to go.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Got the tip to polish the silvercoil :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Hmm..

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


But it's shiny again :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Cable for the extra molex on the Rex3.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


After one hour i finally found a way to get all the cables under the mainboardtray

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some teasers for later this week :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


When looking for the newest bios for the rex3, i also found a driver for symbian phones.
I had no idea this was so easy :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Cleared some 230V cables for the tft's today.
Made a 3-way disconnect-able cable ^^


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


3 AMP connectors.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And done

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Still need to fix the resolutions so the conversion looks better

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


I almost enjoy the view like in real life :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Bought something second hand.
Saw it and just had to have it :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

But still no clue what to do with it :P

I'd say - try to put in steampunkish box from wood/brass/rivets/metal tubes and gears, and rewire so that they show more important stuff, like flow/liquid temps/fanspeed % instead of default audiolevels/temps/power IIRC.

I'm adoring analog gauges. They will not fit well with your generic futuristic desk theme though :(

Jaw Dropping

And again thanks to Highflow.nl for the nice stuff !


Some molex cables, you'll need them with a 1.50m long pc :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Will be used for a later update ;)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Time for a refreshment after 2 years of usage in 2 builds :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And the thing missing in this build ... a mouse with acid green leds :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Thanks again Freddy !!

Received the last 4 fans today (Thanks Kier !:) )

Will try to replace the old Gentle typhoons tomorrow.
I will have to lift the complete desk out of its holder to replace the right fans.

I'm totally in love with the green color the nanoxia fans get with UV light.


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Again 4 hours of non-stop work :)


How i replaced the old Feser coolant.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And put the cards back to slot 1 and 2 so i can better access my raidcard.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And already replaced 3 of the 6 fans.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Better pics next week :P

Asked Cooler Master NL if they could help me out with a little test project cause of a voltage problem with the raidcard.

They did, and within 4 days i got this package trough my mailbox ;)


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Maybe im going to use 2 x 700W instead of 1x1200W

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Lets unpack.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Nice and small, 4cm shorter then an AX1200.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Plenty of cables :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


So want to thank Cooler Master Netherlands for the nice stuff !!

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Been playing with a lot of stuff this weekend ;)


First a little movie of the Coolant refresh :)

http://i56.tinypic.com/a17mnq.jpg



And the testing with the 2 (3) PSU's
Total of 2600W running now.
And off course my 3.3V 5V and 12V are superb now :)
Very silent psu's by the way !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Even under full stress :)
980x @ 4.5 Ghz + 2 x GTX580 @ 960/1150

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And creativity with Bitspower on a Sunday afternoon :D
It was to see the effect of flowing Acid green right under UV leds in the desk.
(For further plans ;) )

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And made a small movie of it.

http://i53.tinypic.com/20qni4m.jpg

good lord man that looks amazing!!!

I'm not subscribing to this- I'm bookmarking it and emailing myself the url then favoriting the email!

nice

3 screens ARE useful :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Damn dude. You don't mess around.

I'm impressed!

Thanks !

And Thanks Freddy !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


After the mouse i was looking for a fitting mousepad for the desk.
Personally i like cloth pads like the Q-pad.
Couldn't find anything at all.
All i could find was a pad with leds in it.
But then the idea popped up ..
Still had some plexi somewhere, and there are 150 UV smd leds in my desk so why not try it :P


The plex.
(Fits perfectly !)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


The "hard" SLI connector. (Thanks Xtrafresh!)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And my RVS cupholder :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


With a jigsaw.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Maybe im going to let the print melt down into the plexi with its pins

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


The Q-Plex :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And the ...ehm ..cupholder :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Still goin to polish them some more later.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

AMAZING!!! it looks amazing. i have no idea how you make everything look so amazing, but it totally is :)... JC... do u have a list of the currently installed hardware? it would just be cool to know everything that is running in there :) (minus the wc loop and other cooling :))

I could sell my Intel X18-M for a good price, so wanted to try the Intel 510.
Going to use it as OS drive

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.jpg


And because i promised Asus to show their logo, here you go :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Some info about the upcoming updates.

- Application for powder-coating is in progress !

- Maybe one of my sponsors will send some extra nice stuff :P

- And a small teaser :P

http://www.l3p.nl/files/Hardware/Des...0250teaser.jpg

Just have to say mate, I love the project so far. Keep up the great work :)

Well, this is the best modding I have ever seen. I'm impressed. Keep up the fantastic work. I'm a fan!
What about some 3DMarks?
And temps while doing the tests.

:up:

Thanks man !

Well haven't got the time yet to be busy with fine tuning, but off course did some benchmarks.

http://hwbot.org/community/submissio...80_47538_marks

http://hwbot.org/community/submissio...80_12663_marks


Cpu temps @ 4.5 Ghz idle around 25 degrees
Cpu temps @ 4.5 Ghz stressed around 60 degrees

Gpu temps @ 950/1100 idle around 22 degrees
Gpu temps @ 950/1100 stressed around 38 degrees

Nice scores an temps! Any future upgrades in mind?

Powdercoating the desk comes first now :)

Quote:

---

Originally Posted by l3p

Powdercoating the desk comes first now :)

---

mmmmm it will look sick ;)

I hope it does :)

Still had to change some things under my floor.
Today i found some time.

Had to replace some fans on my rad for Scythe GT's
Replaced the green tube for Tygon black.

Also replaced the 3 remaining GT's in my desk for green Nanoxia's

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


GT's out

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Only 5cm space for my hand.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Nanoxia's in.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Here my radiator in the distance.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


On request also made a little movie of my trip :)


http://i53.tinypic.com/1zvc2nd.png


Mobile doesn't work here, but baby phone works fine :D

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


De GT's on their place and tubes replaced !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And another small test.
Wanted to know what stuff goes trough my loop.
This way it was easy to discover.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Click it between my tubes and enable the pumps for one hour.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Then disconnect the filter while pumping and stop the pumps as fast as you can.
This is so the dirt really stays in the filter.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

All tiny hairs and wtf, even a piece of my sigarettes :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Till next time :P

did you find any rats, underground, whyle changing the mora fans? :D

Nah it's a new house, so no rats here :)
All i saw were two 5cm tall spiders ^^

Received a nice UV led board today.

It's specially for making photo's from UV-active parts.
You can only use it for 5 minutes per time, else it gets too hot :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Small surprise between the UV leds :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some pictures with the effect

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Watercool that overheating led board :rofl:

The date for powder-coating the desk has set !
Next week Tuesday ill bring it over there :P


10 minutes before unplugging it

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And 3 hours later :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also took me half an hour to think how i will place the second PSU.

Decided to place them like this, ill creata another 120mm fanhole between the psu's tomorrow

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Wanted to use these for my quick connectors outside the desk

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Maybe till tomorrow :P

Yesterday the idea came up for hiding my cables from the 3 screens.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Some won't like it, but for me this works great since my pc is more open then closed :P
So this way it's very easy to take away the backplates.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


It's only connected with the left side of the panel.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


2 hours later it was really empty, looks like a reverse buildlog :(

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Sanding it some.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Like a bomb exploded.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Here i was finished for today :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Quote:

---

Originally Posted by l3p

Like a bomb exploded.

---

i wish that bomb would explode at my house :(

Indeed hehe

I wish that bomb in my house to.

Excelent project. Let's see how it get more cool with powder coat.

Quote:

---

Like a bomb exploded.

---

Yeah, poor L3p with his dingy looking high tech aluminum utility sink. Whatever will we do to console him. LOL

Quote:

---

Originally Posted by Frag Maniac

Yeah, poor L3p with his dingy looking high tech aluminum utility sink. Whatever will we do to console him. LOL

---

lol :p

Finally got the rubber removed.
Thank god for WD40 :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also made the fanhole for between the 2 psu's

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Just some sanding left

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And the extra fillports for future usage ^^

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Also removed some of the backplate again, this time with a grinder :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Quote:

---

Originally Posted by l3p

Finally got the rubber removed.
Thank god for WD40 :)

---

the pictures didnt load the first time i loaded the page and i was a little curious what you where taking pictures of :p:

on an other topic... its looking great! i cant wait to see it once the power coting is done... what color is it gunna be?

EDIT: Powder coating... i typed too fast :p:

lol :)

It's goin to be Graphite black RAL 9011

nice project you got there!

Thanks :)

Made the last fillport hole for future usage

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Almost forgot i need to sand these too so they can be powder-coated in the same color.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Hmm nasty job, sanding anodized aluminum by hand, think i'll use the grinder for it.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Quote:

---

Originally Posted by churchy

Watercool that overheating led board :rofl:

---

That was exactly what I was thinking when I read that :rofl:! :up:

The ultimate Zamboni :D
http://img839.imageshack.us/img839/3852/zamboni.jpg

I like your method of hiding the monitor cables. It looks sleek.

Quite a busy day.

Still had to sand some plates.
Then my wife came in with a nice box.


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Also an other package i ordered at Highflow

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

These Cubitek extension cables are 50cm, very thin and not expensive at all

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Later that day i brought away my desk to the powder coater.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


As curious as i am i asked everything :)

Here all the uncoated products slowly move to a man who "powders" all the hard to reach spots.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

This guys :)
2 meters behind him the machine powders the rest.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


It's just some sort of dry powder that normally would let go.
But because it's electrically loaded it's sticks to the product.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

After that everything goes to the oven.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Here it's heated up till 200 degrees Celsius so the coat gets very hard and equal

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Back home i had to unpack the BP box :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Offcourse i want to use these on my backplate after getting such a nice box :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Want to use these Ram Mods for under my GPU's.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Also want to use these X-stations since they are smaller and have female molex.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Cause the desk will be black soon and all my blocks are plexi, i will try these blocks in plexi too.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Same here.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some extra and new kind of fittings, ill need them for future updates :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG



Vincent and Bitspower ... really you guys RULE :P

http://www.l3p.nl/files/Cebit%202011...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Spo.../bitspower.jpg

Just read the whole post , great project. Looking forward for more update , and pics of course. :)

Thanks man !

Got a real nice present from Bigfoot Networks !
A Bigfoot Networks™ Killer™ 2100 Gaming Network Card :)
Thanks Timo and thanks for the help Xtrafris !)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

"The Killer™ 2100 Gaming Network Card delivers maximum networking performance for online games, whether you’re playing MMOs or first-person shooters. Featuring Advanced Game Detect™, Killer™ 2100 automatically classifies and accelerates traffic to your game ahead of other network traffic for maximum online game performance and a competitive edge."

Off course i want to try that out, im really in for some on line gaming after such a year :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Casemodder Xtrafris also sent me a K`Bling :D
Wanted to use this to mod it on the Killer™ but seems i don't have enough space.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


So first with it's cap removed next to the Gpu's.
Maybe later i'll use a pci-e extender to make some space.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Think i'll just make a square hole in the gtx580 backplate for the network cable.
It's the only Pci-e 4x slot left.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Also got a 7000rpm polisher with some sort of wax from my brother-in-law.
You need to hold it tight, but the effect is perfect !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

nice update ;)

Dude, this is one of the best projects I have ever saw. Very professional build with lots of effort and skills. Even the idea is a simple, the result is outstanding.

In my opinion this mod shouldn't be announced as mod of the month, but the mod of the year.

I cant wait to see the painted parts assembled and build finished :)

Thanks alot man !
Maybe tonight some pictures of the coated desk.
It's in my car now :P

Finally !! :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And still exciting :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


All unpacked.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Very glad i coated the Bitspower radguards in the same color.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also the lianli backplate.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

This is how it will look.
Monday ill get some new rubber tape for the desk and glass so i can lift it in the desk holder.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Before the desk goes into desk holder i first wanted to polish it, but need a new polisher first, this one had no hairs left :)

That looks so nice, can't wait until you get all of the gear back in :p

Small update.

Changed 2 fittings, looked nicer .

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Sleeved some led cables, and modded the Killer 2100 in the gtx580 backplate.
(Also a beer with my neigbour :P )

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Fans also in its place.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And the Ram leds in action.
Think it'll look nice in the dark.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Also made a small movie of the leds and the mess :)

------> Youtube link <------

Thank you for sharing such a great project. I can´t wait to see it, when it's finished!

Nice work man. Love it.

Waited for this picture for 8 months to see this result myself :)
Im Very happy with it !

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Bottom almost ready, still need 1 radguard.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Very slowly it gets its old shape :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

l3p de gekste.. en handigste die ik tot nu toe gekend heb wat betreft pc projecten.. indrukwekkend!!

Can´t wait to C more, great work!

Thanks jaicigy !!

(Do you know me or something ? :P)

It looks so good in black :)

Quote:

---

Originally Posted by l3p

(Do you know me or something ? :P)

---

No, I don´t think so but I would not mind having you as a friend.. to help me out around the house and stuff , you seem really handy ;-P

:up:

I really do love this project

The latest pics don't show for me, anyone else?

Quote:

---

Originally Posted by Frag Maniac

The latest pics don't show for me, anyone else?

---

Nope, not showing for me either :(

No pictures here! :down:

no pics at all

damn

Sorry for the downtime of the pictures :P

Been busy with the PSU's, needed the most efficient way for the cables and the airflow

Also the loop is ready in the backside.


This was a small solution to get as much as possible space for cables next to the psu.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


On both sides of the desk a Bitspower mini X-station for fans and molex connections.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Here i had war with the cables a few times :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

And the main battlefield.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

This is seriously outstanding. I don't think in all the years I've been following XS I've ever seen such a project: a full desk becoming a computer case! :clap::clap::clap::clap:

Thanks for sharing this with us, mate. And shame on me because I missed this project until now. :eek::eek::eek::eek::eek::eek::eek:
Keep it up, you are doing superb :up::up::up::up::up:

Thanks alot man !


Made some time free to give a little update.
Still got a lot to do this weekend to be able to update from my main pc :)


I knew i could get it smaller ! :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

First leds are working.
Also some cables ready for under the mainboard tray.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Further on with the pump-tray and got the reservoir hanging again.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Used the same anti vibration rubber under my HDD's and tray as i use for my glass.
I really love this stuff.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Guess cable management will come later, more and more cables every day :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also a small uv led stroke for the right side fans.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Now also leds in the pumptops.
I like it more then the regular black ones i had.
This photo is with UV leds in it, but thats WAY too purple.
But somehow i cant show it in photo's

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


So i tried blue leds after that, and i liked it :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Next update tomorrow :)

Took me a full hour to find the combination so i can use 2 SLI pipes for the right pump :P

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Molex plugs on the leds of the mainboard

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


So ill be busy the rest of the day connecting all these cables :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

What a long week this was :)


Custom length BP pipes

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Bottom also finished.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Time to fill up :P

http://i54.tinypic.com/n3w3eb.jpg


Just had to make some pictures.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Back to getting the system up and running :)
So the rubbers for the glass.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


First "backplate" in it's place.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Now find a way to work away the cables for 3 screens.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Wow second boot it was up and running.
I really was happy with this.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And im so glad i was able to disable the red leds of the Killer 2100 by the software.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some pictures of last night.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


This morning went up early again and it was smiling to me :)

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also very handy those usb connections on Dells

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And some more night pictures.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Still some small stuff to do.
Polishing the deskholder and the l3p logo.
And some cables need to be changed.

After that ill borrow a better cam and make some better photo's.

True modding skillz here, its looks awsome l3p!

WOW...those night shots are :eek:

Here a last update before i post pictures from the Canon camera i borrowed from my best friend AJ


Sanded and polished the logo again.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Quite some work.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Don't wanted it to mirror to much.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Freddy from Highflow was my saviour :)
Sometimes you can't go on cause you miss 1 cable or connector of a few euro's
Thanks Freddy !!

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Also ordered some other stuff also for future projects.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Different sizes of M4, next week i get M3 too

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


Tapped it at the last moment for the bitspower thumbscrews.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG


And ready to shoot some photo's.

http://www.l3p.nl/files/Hardware/Des...%5B550x%5D.JPG

Finally finished !!


Pictures are clickable to 3600x2900
Have fun !


http://tweakers.net/ext/f/vzwPHV97PO...Noi7q/full.jpg


http://tweakers.net/ext/f/UnPUs2HVfU...EwcCP/full.jpg


http://tweakers.net/ext/f/Ce2kqoQi3Y...W0C9T/full.jpg


http://tweakers.net/ext/f/xMreXlcwBx...pYp8L/full.jpg


http://tweakers.net/ext/f/0YoMmTwlj5...F30Xp/full.jpg


http://tweakers.net/ext/f/JsL5TzZrho...gJqhd/full.jpg


http://tweakers.net/ext/f/e1RXQa0WVz...Uc0eC/full.jpg


http://tweakers.net/ext/f/wO57RqxMFe...xacw2/full.jpg


http://tweakers.net/ext/f/9LWqQIpSVI...51SEs/full.jpg


http://tweakers.net/ext/f/N6W232pH5Q...Srk7D/full.jpg


http://tweakers.net/ext/f/fYzK8bx7Ik...u5aVL/full.jpg


http://tweakers.net/ext/f/cyHIMwih0J...gQOPz/full.jpg


http://tweakers.net/ext/f/7AbPMpG8mr...XmXs5/full.jpg


http://tweakers.net/ext/f/Dgbyc0KJf8...n3yYN/full.jpg


http://tweakers.net/ext/f/eX1vlpa1g0...1P033/full.jpg


http://tweakers.net/ext/f/fNobPOBqGJ...jTZAY/full.jpg


http://tweakers.net/ext/f/rb485z7VO7...6jx6F/full.jpg


http://tweakers.net/ext/f/iXhnnjRano...Ojt9u/full.jpg


http://tweakers.net/ext/f/m1fecRuWIh...uAGro/full.jpg


http://tweakers.net/ext/f/voUbGgyLJc...GYlHz/full.jpg


http://tweakers.net/ext/f/nrILT6lfRy...1cNWH/full.jpg


http://tweakers.net/ext/f/O1gHqzA5fw...u70Au/full.jpg


http://tweakers.net/ext/f/wFoypKpmuV...zsLXG/full.jpg


http://tweakers.net/ext/f/PRHoMxlKth...i9ejm/full.jpg


http://tweakers.net/ext/f/d02AvzwkiM...nCgJO/full.jpg


http://tweakers.net/ext/f/ZHF9diGdwS...RQFlZ/full.jpg


http://tweakers.net/ext/f/NeimTJ7FwM...BzRwq/full.jpg


http://tweakers.net/ext/f/hbkbPEpXJS...KKS9o/full.jpg


http://tweakers.net/ext/f/2o7UBjO1E4...NDR0s/full.jpg


http://tweakers.net/ext/f/ei3ip8tbuY...5RmYT/full.jpg


http://tweakers.net/ext/f/qMQ1MFvlab...dP7wC/full.jpg


http://tweakers.net/ext/f/OIEaWU1G2M...PJhgk/full.jpg


http://tweakers.net/ext/f/OAVQWZ6C9U...D9rqe/full.jpg


http://tweakers.net/ext/f/DB46358xWo...8g778/full.jpg


http://tweakers.net/ext/f/j0799nht27...vJXPq/full.jpg


http://tweakers.net/ext/f/gd2cDJXzxf...G6Tm7/full.jpg


http://tweakers.net/ext/f/q1u81h9UVY...0aEYX/full.jpg


http://tweakers.net/ext/f/MT0gUt7kFY...ghXrY/full.jpg


http://tweakers.net/ext/f/qwP8z79pmk...02zcE/full.jpg


http://tweakers.net/ext/f/IRIXEgMv6t...dUz2y/full.jpg


http://tweakers.net/ext/f/ZVKHZS1Hmk...DAgiJ/full.jpg


http://tweakers.net/ext/f/OgDAlD3TXR...F2kpD/full.jpg


http://tweakers.net/ext/f/wGe7OUcegF...WQ37u/full.jpg


http://tweakers.net/ext/f/Wx3053hh1e...7lr9V/full.jpg


http://tweakers.net/ext/f/5vRlrZqrfj...R5feI/full.jpg


http://tweakers.net/ext/f/LywZs4Ze7w...AaegI/full.jpg


http://tweakers.net/ext/f/88pnzOpvHM...pV8FW/full.jpg


http://tweakers.net/ext/f/gqbyiK5GlL...D9VCa/full.jpg


I hope you enjoyed the photo's !

There will still be some small mods inside the d3sk, but first some rest after 8 months of modding :)