Paradyse TJ07 Mod

Printable View

Show 100 post(s) from this thread on one page

03-08-2010, 10:17 AM
Cyril06

Out of topic : Where did you make the cut of your faceplate ?

In the topic :
Which are the best liquide and tubes in 3/8"-5/8" ?
03-08-2010, 11:03 AM
toro

My cut i made in Germany in a special factory

If you want I can order it and sent it to you :)

I think the best tube is this and liquides i said just a few comments earlier
03-08-2010, 12:36 PM
Cyril06

1 Attachment(s)

Thanks.

Now the hardware parts is choosen, what about the circuit flow ?

Pump > GPU > CPU > Réservoir > Rad > And back to pump ?

Like this :

Attachment 101857
03-08-2010, 01:24 PM
toro

http://www.abload.de/img/unbenanntm3ds.jpg

I think it is better to send the water first through the rad and after through the Wardware

Pump -> Radiator -> GPU -> CPU -> Reservoir -> Pump
03-08-2010, 01:38 PM
Cyril06

I think it's better to put the rad just before the pump. By this, the water is fully cooled by the rad, and the pump can send the cold water in the circuit with max pressure !
If you put the rad after the pump, the rad will fall the flow pressure...
03-08-2010, 01:39 PM
Mabyboi

Quote:

Originally Posted by toro

http://www.abload.de/img/unbenanntm3ds.jpg

I think it is better to send the water first through the rad and after through the Wardware

Pump -> Radiator -> GPU -> CPU -> Reservoir -> Pump

this is exactly what i do, setup exactly like the pic you have there.

you should always do Res-> pump, will help you ALOT in the long run.
03-08-2010, 01:40 PM
toro

wuhu whos tha maaaaan :rofl:

:party:
03-08-2010, 02:30 PM
Cyril06

Ok so here is the final one :

http://cyril06.free.fr/paradyse/water/waterplan2.gif
03-08-2010, 04:15 PM
Church

Why not turn arround rad, so that tubing attachment is near back of case? shorter tubing in result ..
03-08-2010, 05:38 PM
Rise

Quote:

Originally Posted by churchy

Why not turn arround rad, so that tubing attachment is near back of case? shorter tubing in result ..

PSU is back there... that's a tight turn to make
03-09-2010, 01:34 AM
Cyril06

Quote:

Originally Posted by churchy

Why not turn arround rad, so that tubing attachment is near back of case? shorter tubing in result ..

As Rise said it, there is the PSU in the back of the case. So I will need to use some curved fittings and it will decrease the flow...
And a little more tubes is not dramatical when we see the cost of all the watercooling parts !!!
03-09-2010, 09:15 AM
Cyril06

1 Attachment(s)

The order is done :

Attachment 101875
03-09-2010, 11:16 AM
toro

why did you choose another pump?

and you didn't order enough fitings

or will you order Bitspower?
03-09-2010, 11:30 AM
Cyril06

I choose this pump to have a full EK System.
Which fittings are missing ?
03-09-2010, 11:50 AM
toro

1x http://www.aquatuning.fr/product_inf...---2-Slot.html
2x http://www.aquatuning.fr/product_inf...el-coated.html
6x http://highflow.nl/aansluitingen/fit...4-adapter.html
4x http://highflow.nl/aansluitingen/fit...8-fitting.html
1x http://highflow.nl/aansluitingen/fit...ny-bp-tmb.html
1x http://www.aquatuning.fr/product_inf...1-4-Typ-2.html
1x http://highflow.nl/aansluitingen/fit...p-wtp-c42.html
03-09-2010, 12:06 PM
Cyril06

Yes, but I don't think I need all of them.
I will order some fits from : http://www.caseking.de/shop/catalog/...sse:_:225.html
They have a large choice. I make a list later...
03-09-2010, 12:58 PM
Cyril06

Here is the list of Bitspower fittings :

13 x http://www.caseking.de/shop/catalog/...ck::12456.html
2 x http://www.caseking.de/shop/catalog/...ck::12452.html
2 x http://www.caseking.de/shop/catalog/...ck::12472.html
4 x http://www.caseking.de/shop/catalog/...ck::12573.html
2 x http://www.caseking.de/shop/catalog/...ck::12556.html
6 x http://www.caseking.de/shop/catalog/...ck::12489.html

And to empty the loop in case of modification :
1 x http://www.caseking.de/shop/catalog/...ck::12568.html
1 x http://www.caseking.de/shop/catalog/...ck::12557.html

Again 130€....
03-09-2010, 01:03 PM
toro

Jop looks good :)
03-11-2010, 08:47 AM
Cyril06

Teaser :D

http://cyril06.free.fr/images/IMG_9762.JPG

http://cyril06.free.fr/images/IMG_9761.JPG
03-11-2010, 09:16 AM
toro

hmmmm tastes great
03-12-2010, 06:23 AM
toro

go on

make something new :)
03-12-2010, 06:26 AM
Cyril06

Hey I want ! But I can't ! I'm still waiting for the motherboard, the watercooling and the backplate ! I think I will recieve the water tomorrow.

And you took a little of my time ;)
03-12-2010, 06:37 AM
toro

hehe

ok but now you can go on much faster ;)
03-13-2010, 07:18 AM
dualbrain

A good logo can make a good design and your logo is good imho :)
Cyril ftw!
03-13-2010, 01:29 PM
Cyril06

Thanx Nils ;)

I love my "C star" ! It's my sig from a long time !!
03-14-2010, 02:38 AM
toro

i like it too

looks very serious

(hope my toro sign too :D )
03-18-2010, 10:35 AM
Cyril06

A little poll :

What colour for my watercooling tubes and liquid ?

Here is the next motherboard :

http://www.generation-gpu.fr/UserImg...57_KR_LG_5.jpg
03-18-2010, 10:42 AM
kill_a_wat

I have Blue tubes in my TJ07 but I think black will be mean especially with the EVGA mobo
03-19-2010, 06:33 AM
toro

i have clear tubes and they are :banana::banana::banana::banana:o :D
03-21-2010, 12:58 PM
Cyril06

I will put white tubes with blue liquid ;)

2 little shots :

http://cyril06.free.fr/images/DSC04053.JPG

http://cyril06.free.fr/images/DSC03922.JPG
03-23-2010, 02:18 PM
toro

nice :eek:

go on

more pls
03-24-2010, 06:51 PM
Halo_003

Man that looks amazing! I really love that carbon fibre!
03-25-2010, 02:08 PM
toro

more more more
03-27-2010, 02:45 AM
DARK_01

This is real impressive.
Thanks for sharing i really like the custom plates u done to cover it all up.
Looks real nice and tidy. :up:.

Inspired me to do more modding :).
Keep up the great work.

Glad to see u going water cooling :up: .
I am about to endeavor into WC myself.
I am currently working on a mod myself to fit water cooling into my thermaltake armor mx+..
03-28-2010, 02:33 AM
toro

Go on

do something

we want sth to see ;-)
03-29-2010, 09:46 AM
Cyril06

The motherboard is in the place !

Temporary build :

http://cyril06.free.fr/images/DSC02534.JPG

http://cyril06.free.fr/images/DSC02545.JPG
03-29-2010, 10:20 AM
Aedubber

For your water cooling you should go res , pump, rad, cpu, gpu or gpu, then cpu .. There is heat from the pump and the cpu generates more heat then a gpu would.. As far as liquid i would recommend distilled water with silver kill coils and run some colored tubing..As far as the build goes, looks great ! I am redoing my water cooled system as well, tends to get very expensive but its fun.
03-30-2010, 02:00 PM
Martin S

Latest update looks beautiful, Cyril! I'm really looking forward to more pics :D
03-30-2010, 02:23 PM
Cyril06

Quote:

Originally Posted by Aedubber

For your water cooling you should go res , pump, rad, cpu, gpu or gpu, then cpu .. There is heat from the pump and the cpu generates more heat then a gpu would.. As far as liquid i would recommend distilled water with silver kill coils and run some colored tubing..As far as the build goes, looks great ! I am redoing my water cooled system as well, tends to get very expensive but its fun.

I know my loop is not the best for heat but I think it's the best for good looking. With the loop you tell me it will have tubes everywhere !

Quote:

Originally Posted by Crys1s_Gam3r

Latest update looks beautiful, Cyril! I'm really looking forward to more pics :D

;) Need Bitspower fittings to make a clean loop and I think I will have everything to finish the mod (may be time !)
03-31-2010, 04:37 AM
Cyril06

Here is today's work :

Working on internal light system :

http://www.paradyse-conception.com/T...worklog/78.JPG

http://www.paradyse-conception.com/T...worklog/79.JPG

http://www.paradyse-conception.com/T...worklog/80.JPG

http://www.paradyse-conception.com/T...worklog/81.JPG

And backplate cut for the light switcher :

http://www.paradyse-conception.com/T...worklog/82.JPG

http://www.paradyse-conception.com/T...worklog/83.JPG

Some more shots :

http://cyril06.free.fr/images/DSC02587.JPG

http://cyril06.free.fr/images/DSC02580.JPG

http://cyril06.free.fr/images/DSC02590.JPG

http://cyril06.free.fr/images/DSC02591.JPG

http://cyril06.free.fr/images/DSC02593.JPG
03-31-2010, 02:13 PM
toro

one word: BRILLIANT
03-31-2010, 02:21 PM
Martin S

Beautiful shots Cryil! :)
04-09-2010, 09:49 AM
Cyril06

Bitspower's fittings are here :

http://www.paradyse-conception.com/T...worklog/89.JPG

http://www.paradyse-conception.com/T...worklog/90.JPG

http://www.paradyse-conception.com/T...worklog/91.JPG
04-09-2010, 03:13 PM
toro

wuhu
armada ;)
04-10-2010, 05:52 PM
Dyn0miteMat

Looking good
04-11-2010, 06:20 AM
Cyril06

Today's work :

Little cut for SATA cables and making of the blinds mounting system

The cut :

http://cyril06.free.fr/images/P1000098.JPG

http://cyril06.free.fr/images/P1000099.JPG

The little rail in wood I stole to my son :

http://cyril06.free.fr/images/P1000105.JPG

http://cyril06.free.fr/images/P1000106.JPG

http://cyril06.free.fr/images/P1000109.JPG

Here is what it looks like. This is the blind I made for toro but it is the same one :

http://cyril06.free.fr/images/toro4.JPG
04-11-2010, 12:46 PM
toro

i know these pictures from somewhere...and the mounting set too ;)

LOVE IT
04-12-2010, 11:43 PM
PaRn ssR

I lovin it
04-13-2010, 12:00 AM
Camino-Palmero

Damn - that's cool! :up:
04-19-2010, 09:27 AM
Cyril06

I FINALLY have everything to finish the mod !

I put everything in the case to make the last adjustments.

The mod is still not finished (as you can see...) and there are many modifications to do : door's cut for the rad, sleeving and cable-management, change of SLI bridge, painting, lighting system, etc...

Photos time :

http://cyril06.free.fr/paradyse/photos/DSC04066.JPG

http://cyril06.free.fr/paradyse/photos/DSC04068.JPG

http://cyril06.free.fr/paradyse/photos/DSC04069.JPG

http://cyril06.free.fr/paradyse/photos/DSC04074.JPG

http://cyril06.free.fr/paradyse/photos/DSC04078.JPG
04-20-2010, 02:54 AM
Onoff312

Love how the rad fits perfectly you just pulled out the mesh and put what on the sides of the panel as edging? i want to do similar with mine that standard mesh is so restrictive.
04-20-2010, 03:30 AM
Cyril06

It's the double side tape I used for the plexi. It's quite good on the photo but really ugly in real !! I have to find something to put on tape place...

http://www.paradyse-conception.com/T...worklog/60.JPG
04-20-2010, 08:29 AM
Cyril06

Some more shots :

http://www.paradyse-conception.com/T...orklog/103.JPG

http://www.paradyse-conception.com/T...orklog/104.JPG

http://www.paradyse-conception.com/T...orklog/105.JPG

http://www.paradyse-conception.com/T...orklog/106.JPG

http://www.paradyse-conception.com/T...orklog/107.JPG

http://www.paradyse-conception.com/T...orklog/108.JPG
04-20-2010, 10:15 AM
kwscore

5 star:clap:looks awesome :up:
04-28-2010, 04:41 PM
Cyril06

New custom SATA power cable (Cleaner than the previous one...) :

http://www.paradyse-conception.com/T...orklog/109.JPG

http://www.paradyse-conception.com/T...orklog/110.JPG
05-01-2010, 12:30 PM
toro

:YIPPIE:Nice first May:YIPPIE:

you have sth new?
05-01-2010, 09:22 PM
NoGuru

Stunning build!
05-02-2010, 12:17 AM
Cyril06

Yes Toro. I was working on the disassembling and the sanding of the case, plus some minor modifications... Today I start the paint. I will try to make some shots ;)
05-02-2010, 06:51 AM
Cyril06

Here is today's work. Sorry for quality but some photos are taken with my phone...

Before the big disassembling :

http://www.paradyse-conception.com/T...orklog/111.JPG

Ready for paint :

http://www.paradyse-conception.com/T...orklog/112.JPG

http://www.paradyse-conception.com/T...orklog/113.JPG

http://www.paradyse-conception.com/T...orklog/114.JPG

http://www.paradyse-conception.com/T...orklog/115.JPG

Primer :

http://www.paradyse-conception.com/T...orklog/116.JPG

http://www.paradyse-conception.com/T...orklog/117.JPG

And black layer :

http://www.paradyse-conception.com/T...orklog/118.JPG

Spray bombs :

http://www.paradyse-conception.com/T...orklog/119.JPG

Change of the PSU's mesh. Before :

http://www.paradyse-conception.com/T...orklog/120.JPG

After :

http://www.paradyse-conception.com/T...orklog/121.JPG

http://www.paradyse-conception.com/T...orklog/122.JPG

Paradyse's HDD's :

http://www.paradyse-conception.com/T...orklog/123.JPG

Bonus :

http://www.paradyse-conception.com/T...orklog/124.JPG

http://www.paradyse-conception.com/T...orklog/125.JPG
05-02-2010, 07:28 AM
NoGuru

Braiding, clever.
05-02-2010, 09:00 AM
Church

Woah, exactly. Lot's of fan cables on rads can look very interesting if braided. Nice idea.
05-02-2010, 08:50 PM
PaRn ssR

Nice guy
05-03-2010, 02:39 AM
jedimindtriks

awesome man, very good work
05-03-2010, 04:19 PM
Cyril06

Thanks men ;)

Here it is ! The re-build is ended !

Some photos of the re-build :

Motherboard chassis :

http://www.paradyse-conception.com/T...orklog/126.JPG

PSU's holder :

http://www.paradyse-conception.com/T...orklog/127.JPG

http://www.paradyse-conception.com/T...orklog/128.JPG

http://www.paradyse-conception.com/T...orklog/129.JPG

HDD's bay cover :

http://www.paradyse-conception.com/T...orklog/130.JPG

http://www.paradyse-conception.com/T...orklog/131.JPG

http://www.paradyse-conception.com/T...orklog/132.JPG

http://www.paradyse-conception.com/T...orklog/133.JPG

Watercooling's radiator holders :

http://www.paradyse-conception.com/T...orklog/134.JPG

Lighting switch :

http://www.paradyse-conception.com/T...orklog/135.JPG

Lighting swith (from the inside) :

http://www.paradyse-conception.com/T...orklog/136.JPG

Light control box with a DEL stick :

http://www.paradyse-conception.com/T...orklog/137.JPG

Motherboard installation :

http://www.paradyse-conception.com/T...orklog/138.JPG

Fans installation :

http://www.paradyse-conception.com/T...orklog/139.JPG

Bottom of the case with watercooling elements :

http://www.paradyse-conception.com/T...orklog/140.JPG

Little modification to fill in the reservoir ;)

http://www.paradyse-conception.com/T...orklog/141.JPG

Macro on the reservoir :

http://www.paradyse-conception.com/T...orklog/142.JPG
05-03-2010, 05:25 PM
NoGuru

Fantastic work!
05-04-2010, 10:28 AM
dweldom

This is very skilled work! I hope this turns out perfect :D
05-04-2010, 04:59 PM
Cyril06

http://www.paradyse-conception.com/T...s/final/01.JPG

http://www.paradyse-conception.com/T...s/final/02.JPG

http://www.paradyse-conception.com/T...s/final/03.JPG

http://www.paradyse-conception.com/T...s/final/04.JPG

http://www.paradyse-conception.com/T...s/final/05.JPG

http://www.paradyse-conception.com/T...s/final/06.JPG

http://www.paradyse-conception.com/T...s/final/07.JPG

http://www.paradyse-conception.com/T...s/final/08.JPG

http://www.paradyse-conception.com/T...s/final/09.JPG

http://www.paradyse-conception.com/T...s/final/10.JPG

http://www.paradyse-conception.com/T...s/final/11.JPG

http://www.paradyse-conception.com/T...s/final/12.JPG

http://www.paradyse-conception.com/T...s/final/13.JPG

http://www.paradyse-conception.com/T...s/final/14.JPG

http://www.paradyse-conception.com/T...s/final/15.JPG

http://www.paradyse-conception.com/T...s/final/16.JPG

http://www.paradyse-conception.com/T...s/final/17.JPG

http://www.paradyse-conception.com/T...s/final/18.JPG

http://www.paradyse-conception.com/T...s/final/19.JPG

http://www.paradyse-conception.com/T...s/final/20.JPG
05-04-2010, 05:02 PM
NoGuru

Stunning is all I can say. Clean and smooth lines, excellent colors.
05-05-2010, 12:28 PM
Cyril06

Thanks NoGuru ;) Glad that you like it !

For the ultimate shots : http://paradyse-conception.com/TJ07/EN/gallery2.html
05-05-2010, 02:33 PM
warthorn

Beautiful Cyril! So clean, love the simple chrome letters on the rad...

Hope to see all your best photos in other places as well ;)
05-05-2010, 03:25 PM
dingdong555

Fantastic work mate! Stunning.
05-07-2010, 02:10 AM
Cyril06

Flash poll ! Want new wallpapers ? Send me the photo (or the link) from the Gallery 1 or Gallery 2 you want to add to the wallpaper page at : contact@paradyse-conception.com The most popular ones will be transformed in wallpapers ;)
05-07-2010, 06:13 AM
toro

wonderfull!!!!

Nice pictures and nice built
05-07-2010, 12:05 PM
BlackFlag

Great work with the drive plate, i'm really liking the cf.
05-11-2010, 04:31 AM
Nicksen

Nice work
05-11-2010, 07:22 AM
k.3nny

Im gonna steal some ideas from ur build for my RV1000 ;)

I F*cking love ur case! i love the overal design.
07-23-2010, 11:59 AM
Cyril06

News !

Facebook fan page : http://www.facebook.com/pages/Parady...28326560539083

Website French version release : http://www.paradyse-conception.com/T.../index-fr.html

Wallpapers are available for iPhone : http://www.paradyse-conception.com/T...wallpaper.html
07-25-2010, 09:00 PM
h20xide

Looks amazing mate :clap:
08-04-2010, 05:34 PM
Cyril06

Thanx ;)

New lighting photo shoot session :

http://www.paradyse-conception.com/T...s/final/41.JPG

http://www.paradyse-conception.com/T...s/final/42.JPG

http://www.paradyse-conception.com/T...s/final/43.JPG

http://www.paradyse-conception.com/T...s/final/44.JPG

http://www.paradyse-conception.com/T...s/final/45.JPG

http://www.paradyse-conception.com/T...s/final/46.JPG

http://www.paradyse-conception.com/T...s/final/47.JPG

http://www.paradyse-conception.com/T...s/final/48.JPG

http://www.paradyse-conception.com/T...s/final/49.JPG

http://www.paradyse-conception.com/T...s/final/50.JPG

http://www.paradyse-conception.com/T...s/final/51.JPG

http://www.paradyse-conception.com/T...s/final/52.JPG

http://www.paradyse-conception.com/T...s/final/53.JPG
08-05-2010, 05:30 AM
nizery

Nice work
08-31-2010, 04:44 AM
Cyril06

Thank you man. I wanted it simple and clean ;)
08-31-2010, 07:59 AM
mattlef

Very well done.
I love the lighting.
08-31-2010, 05:58 PM
3dchipset

What kind of temps are you getting on your CPU? Considering you're going through the 2 GPU's first?
08-31-2010, 07:37 PM
h20xide

Quote:

Originally Posted by 3dchipset

What kind of temps are you getting on your CPU? Considering you're going through the 2 GPU's first?

Flow order is doesn't matter, as long as the res is directly before the pump.
09-01-2010, 01:44 AM
Cyril06

Here are my actual temps (idle) :

http://cyril06.free.fr/images/Tempparadyse.JPG
09-01-2010, 01:46 AM
h20xide

Quote:

Originally Posted by Cyril06

Here are my actual temps (idle) :

http://cyril06.free.fr/images/Tempparadyse.JPG

Idle means next to nothing, show us load! :yepp:
09-01-2010, 01:53 AM
Cyril06

Yes but actually my computer is idle, so it was fast to do the screenshot !
I will take a screen later in Battlefield Bad Company 2 ;)
09-01-2010, 01:54 AM
h20xide

Quote:

Originally Posted by Cyril06

Yes but actually my computer is idle, so it was fast to do the screenshot !
I will take a screen later in Battlefield Bad Company 2 ;)

Lol, how about prime or linx? :up:

whats the cpu at? stock clocks?
09-01-2010, 02:05 AM
Cyril06

Hey ok !!

I have wPrime 2.00. I can do a 1024M test. Is that ok for you ? ;)

The CPU is a little overclocked : 3.1GHz (2.9 stock)

And GPU are overclocked too :
- gpu : 702MHz (633 stock)
- gddr : 1250MHz (1134 stock)
- shaders : 1512MHz (1404 stock)
09-01-2010, 02:16 AM
h20xide

Quote:

Originally Posted by Cyril06

Hey ok !!

I have wPrime 2.00. I can do a 1024M test. Is that ok for you ? ;)

The CPU is a little overclocked : 3.1GHz (2.9 stock)

And GPU are overclocked too :
- gpu : 702MHz (633 stock)
- gddr : 1250MHz (1134 stock)
- shaders : 1512MHz (1404 stock)

Not much of a cpu ocer hey? :p:

tbh I've never used wPrime, but that should be fine
09-01-2010, 02:19 AM
Cyril06

My max OC is @ 4.2GHz : http://www.evga.com/ModsRigs/detail.aspx?BuildID=20566
But the I7 870 is enough to everything I do. So I don't need to OC a lot ;)
09-01-2010, 02:21 AM
h20xide

Quote:

Originally Posted by Cyril06

My max OC is @ 4.2GHz : http://www.evga.com/ModsRigs/detail.aspx?BuildID=20566
But the I7 870 is enough to everything I do. So I don't need to OC a lot ;)

Ah kk, fair enough mate
09-01-2010, 04:08 AM
Cyril06

Ok. Here is a 42 min test with Linpack Test from OCCT 3.1.0 :

CPU result (max 60°C) :

http://cyril06.free.fr/images/2010-09-01-14h04-CPU1.png

GPU result (max 45°C) :

http://cyril06.free.fr/images/2010-09-01-14h04-GPU1.png
09-01-2010, 12:40 PM
aka_GK

1.317 vCore is dam good @4.2, great job Cyril
09-02-2010, 12:07 AM
Ced-G60

Nice work colleague :)
09-06-2010, 03:18 PM
antiacid

great work, now go and grab a glass of wine and relax a bit ;)
09-06-2010, 04:01 PM
techtonicpc

Great looking mod. One of the best I have seen.
09-11-2010, 02:56 PM
Cyril06

Thanks ;)
09-11-2010, 04:33 PM
Cpl Ledanek

sexy build:up:

question: why you have fans in the back with the Fractal name upside down?
09-12-2010, 02:37 AM
Cyril06

Well ! It is for the internal cable management. As it, fans cables are going directly to the motherboard so I can hide them easily... But it's true I can put the sticker on the right side :p

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 04:41 PM.

XtremeSystems