ufffff! cant wait! :-) :D
Printable View
ufffff! cant wait! :-) :D
no, its not Bulldozer sample :-D.....
Cant wait to see how it performs flanker. Not seen much of any board that aint the CHIV lately.
Been airbending myself this morning. New target for you ;)
http://img42.imageshack.us/img42/942...1090tspi1m.jpg
http://img130.imageshack.us/img130/556/14750190tair.jpg
Board needs more voltage than most and this 25C ambient isn't helping.
Gappo-nice 1 man...know, im fearing a bit, Thuban is not Deneb, its bit diferent and want no kill chip :-), did u try validation with AIR? Which your series?
OK, with this lower, il not fear voltage :-D (bad quality photos):
again 1015, but EPMW, SN 00208
http://img689.imageshack.us/img689/1417/thuban1.jpg
http://img710.imageshack.us/img710/8919/thuban2.jpg
nice el gappo :) one of my cores likes to crap out shortly over 4600mhz so its hard for me to make big valids or get great clocks on these single thread benchies like that when im trying to run them w/ all cores clocked up the same
edit: and AWESOME!!! flank3r!!! make sure you do some good testing on it before you torture it, im gonna guess stability is similar to your dpmw but not as golden for valids,,, we'll see if im close ;)
1.62V is for my "gold" chip dangerous, risk to possible kill. But for this second....hm, if i kill it, kill it :-D. But im hoping for later LN2 sesion with this EMPW chip.
@Crazy diamond. disable cores or set affinity or both.
@flanker, tis a 1015GPMW and not the best :/ The board also requires more voltage for the same clocks than other boards... But I did not set 1.62 it just thinks I did :rofl: It's set to 1.6 I believe, which was overkill. I reakon 1.57 would do it on a cool day and if my heat sink wasn't full of these :rofl:
The perils of having an awesome techstation?
http://img375.imageshack.us/img375/1940/dsc02540k.jpg
SUICIDAL MOTHS :ROTF:
http://img203.imageshack.us/img203/7230/dsc02623d.jpg
Cleaned this heat sink 4 times since last night. Finally decided to put some netting up at the windows. :up:
Oh and btw moths are not conductive :p
Cant really do any validation stuff atm, need to install vista :(
Sigged. :DQuote:
Originally Posted by El Gappo
LOL the worst thing is I had bum lube on the board from my phase because I was planning to map out some read points do a little air testing and stick it back on phase... Well the little delta fan I had on the NB sucked a big one up and splattered it all over my bum lube :down: Didnt look to pretty.
It's this bloody power phase led that attracts them. I'll be sure to mention it in the review haha.
@SUICIDAL MOTHS
:-D, n1. Maybe i can try kill some mosquitos and load Ultra Kaze at maximum :)
:rofl::rofl: i really dont know how to say how awesome this thread just turned!
Today is a bit hot, but i have time for a lot benching my second Thuban series 1015 EPMW. First looks at screenshot :). Now im instaling at second Thuban support DVD and than benchmarking with BOX :)
http://img189.imageshack.us/img189/9...15epmw4.th.jpg
http://img197.imageshack.us/img197/9...015epmw.th.jpg
http://img718.imageshack.us/img718/9...15epmw2.th.jpg
http://img812.imageshack.us/img812/6...15epmw3.th.jpg
not extra chip to time....i testing only with BOX, but definetely is whorse than my first chip...
worse for valid and benchmark speeds?
Ok, done, i have not too much nerve
In my room was hot, 27 C and i was warm too :). This second Thuban 1015 EPMW is not so good as my first 1015DPMW. I used 500W PSU Seasonic from my x4 965, 1x DDR3 module A-Data, GA890FXA-UD5 with F3 BIOS, fresh OS and CPU+BOX cooler:p:.
I thinking, AMD box is not so bad, meaning with 1.45V is not problem overclock stability. I tested first wprime burning at 1024M, no tweaking RAMs etc. Tried 4100 MHz, 1.5V and temps was max 67 C :-)
http://img717.imageshack.us/img717/7...oxwprime19.jpg
Than i found max overclock for validation. Compared with first chip, i was a bit disappointed. Think, this is about a normal Thuban chip:
4510 MHz with 1.535V, maybe with more time i can got about 4550 MHz
http://valid.canardpc.com/cache/screenshot/1282454.png
validation
Time to Everest benchmarks between 4300-4350 MHz
http://img295.imageshack.us/img295/2...chemem4300.jpg
http://img412.imageshack.us/img412/9665/everest1.jpg
http://img33.imageshack.us/img33/8895/everest2e.jpg
http://img689.imageshack.us/img689/2643/everest3.jpg
http://img10.imageshack.us/img10/5356/everest4.jpg
http://img811.imageshack.us/img811/3889/everest5.jpg
http://img535.imageshack.us/img535/4654/everest6.jpg
superpi 1M was last...no tweaking RAMs timing
http://img811.imageshack.us/img811/2053/superpi1m.jpg
That is NOT normal for a thuban chip.
The chip is too hot. Remember that Thubans temp sensors are broken.
67c is probably 80c.
My 965 does 4494 valid, and SuperPi at 4400+. Not at that voltage, but certainly safe volts for Deneb. (1.61v)
Temps make a lot of difference.
no, at some boards coretemp show corect and here at Gigabyte was it ok, cause idle temps was 34 C (rooms 27) and "gold" Thuban show me at Cros IV Formula 24 C (its 10C diference, yes, here is not correct)
CoreTemp shows temperatures on reported from the CPU.Quote:
Originally Posted by FlanK3r
34c is most likely still NOT correct.
On the box cooler, my 965 at stock volts idles/clocks at 43c.
remember, stock 965 and 1090t is diferent..and i had not chip, where isrunning at more than 62 C normaly...Denebs with higher temps blackscreen or frozed system first
Today i have for us max low voltage stability. I set some steps in windows, because i was boring going again to BIOS :-)
So, how do u like 1.3V and 3954 MHz in PRIME? PS: Coretemp show me not corectly, think reality is 10 C higher. Still trying go higher than 4300 MHz (exactly 4309 MHz) in LINX or PRIME, but i have not luck :-/
http://img683.imageshack.us/img683/5...3954mhz277.png
Nice result...1.3V for almost 4G...
What was your ambient temp ?
21 C now, think, normally i have between 20-22 C, only some hot days i had 26-30 C :-)
Right now in northern Athens its 31C (11:54PM)...it seems you have 12months/year Bench-Ready-Weather in Czech Republic, right ?:p:
no, we have outside now about 20 C, but in Juni and Juli was hot, 25-37 C outside, i was after work mostly at swimming pool :-) Heh, but 31 at "night", its not good, mainly not for sleeping :-D
1,3v ..wow pretty low!
Nice, looks like you got a 1090T that's binned for almost 95W. What's the stepping?
1015 DPMW, the same, which MAD222 has (he got 6950 MHz with it)
Nice cpu you have there..
Mine could do 4.2ghz at 1.306v on water prime stable. But it is sold now.
http://i438.photobucket.com/albums/q...ore42GHZ-1.jpg
http://i438.photobucket.com/albums/q...ore42GHZ-1.jpg
What stepping? I sound like a broken record lol.Quote:
Originally Posted by Riska
Holy bajeebus, 4.2 stable at 1.30v. Wow.
hm, very nice Riska, maybe mistake sold it :-(. Now im waiting at MAD222 gold chip, he promise me max air stable clock and thinking, he can got 4350-4400 MHz (gold chip, he got 6.96 GHz !)
even more impressive :eek:
riska? what temps do u had?
I remember my promise, Flankerp! :D
Will get back my 2nd 1090T this week from the lcoal media
You know how much I paid for the power bill last month?....USD 300:(
That's why I dun do much 3Dbenching @ home...I'm broke:mad:
Quote:
Originally Posted by FlanK3r
I had 40-45c max my water is made of 2x Xspc RX360 radis in a loop and a laing 10w pump with xspc res/top on and a xspc Delta3 coolinghead for cpu and 6x zalmans zmf3 fans at 5v
MAD:dont kill chip under LINX, rules voltage max 1.55V for CPU, ok?:-D
UFff, so much money as my holiday to Italy...
Flankerp
Just tried for a few mins with only 1g available memory
What do you want me to do ?
Only have 790FXTA-UD5 @ home
Wow...it's hot, 44c @ 100% full load, man!
http://i967.photobucket.com/albums/a...1090T_Linx.jpg
nice bro, u are lucky bastard ;):D:clap: !
Set higher problem size (in x86 with 3.5GB its about 14 300) and again 20 loops (your temps will bit higher :) ) Whats your ambients celsius? I cant broken still more than 4300MHz, maybe some setings, dont know. Show me next LINX, il so happy :):p:
Ok, Flankerp
4.36g error on loop 14/15
reduced 1 fsb & had no problem
19c ambient on air
http://i967.photobucket.com/albums/a...1-02213533.png
holy :banana::banana::banana::banana:!! xtremely impressive!
very good MAD! More voltage doesnt helped u? This chip looking +40 MHz better than my :-). Im looking, u have good cooler, temps (i think real temps, Coretemp show at some chips 10 C diference) max about 54 C.
Diamont:think, this is maybe the best AIR cooling Thuban the world.
Hahah...:D
I was using yasya with GC2 & air condition on
The main pt is the CPU itself that doesn't need high volt.
Anything higher than 1.488v would get me an error @ loop 14/15
With lower NB like 2600-2800, I think 4.4GHz Linx stable can be done ! ;)
This is the weird chip I mentioned b4....boot up to Windows @ 4.56g with NB 3180/Ram 1800+ & complete PI8m/16m without any problem, but can't do well on LN2
I thought this was a 7GHz chip, I'll try another LN2 session with this chip @ diff. setting & volt. to see if it can hit 7GHz
PS: My kids have just gone to bed, I can do some more Linx run now !
whau, try max LINX with default NB clock :-). Im curios how much better than tuned chip. We have the same problem, i tried higher voltage and got to errors :-)
PS: and yes, your PS like me very much :D (maybe one from LINX testing, how much u can get with only 1.3V stable, how much with 1.4, 1.425 and 1.45V.It will be also interesting)
Can't pass 4.4GHz
Temp. higher than 45c by corertemp reading would give erorrs
Now running 4.38GHz @ 14135 problem size for 10 loops (just did a few times & Linx stopped @ loop 10...damn):(
its hard time tweaking LINX stability (maybe harder than Cinebench runs :D) Now i have here a bit HOT, so for me is today 4300+ to close
10 loops is just fine
Need to do better Temp. control in order to break through 4.4GHz @ bigger problem size & 20 loop stable
http://i967.photobucket.com/albums/a...1-03010530.png
whau, and freat temps now
Today im posting boring result with default voltage and good stable clock x4 965 BE C3. At weekend was a bit hot, so 1.392V is ideal for CPU life :-). Second, in this weather i have no chance broken benchmarks at highest setings+ think, i can got higher stable clock with ambients about 22C than yesterday... Setings:
Gigabyte MA790X-UD4
2x 2GB Kingston Hyper X 1066MHz cl5
AMD x4 965 BE C3
CoolerMaster Hyper 212
ATI HD3870 512 MB
Windows XP SP3 32-bit
First setings at screen lower wasnt the best, but im tetsing not often in PRIME95 :-). So 3698 MHz + 2630 MHz at NB and 1.392V
http://img248.imageshack.us/f/prime9...1392vstab.png/
LinX: 3794 MHz and 2710 MHz at NB
http://img6.imageshack.us/img6/1326/...2710mhznb1.png
But benchmarks was runing by me only at stablec clock 3780 MHz + 2700 MHz NB.
Everest memory benchmark
http://img812.imageshack.us/img812/9...benchmark3.png
Time for superpi 1M :-)
http://yfrog.com/13superpi1m3780mhz2700mhzp
And for 32M superpi:
http://img827.imageshack.us/img827/7...0mhz2700mh.png
Looking at the tests with the archives, first winrar bench
http://img844.imageshack.us/img844/4...80mhz2700m.png
And 7zip benchmark
http://img121.imageshack.us/img121/3...3780mhz270.png
Now some next multicore calculating and memory benchmarks.
MaxxPi 4M
http://img843.imageshack.us/img843/9...hz2700mhzn.png
MaxxPi 16M
http://img291.imageshack.us/img291/4...mhz2700mhz.png
MaxMEM
http://img132.imageshack.us/img132/9...z2700mhznb.png
MaxxFloops-like this benchmark now :)
http://img196.imageshack.us/img196/4...mhz2700mhz.png
Science benchmark for scientists :D
http://img814.imageshack.us/img814/8...mplete3780.png
Geekbench
http://img685.imageshack.us/img685/3...mhz2700mhz.png
Fritzchessbench
http://img188.imageshack.us/img188/8...chmark3780.png
wprime 32M and 1024M
http://img228.imageshack.us/img228/6...mhz2700mhz.png
3D and rendering in Cinebenches :-)
http://img440.imageshack.us/img440/5...863780mhz2.png
http://img809.imageshack.us/img809/8...3780mhz270.png
At latest i tested x264 benchmark, but results are strange (dont know, what version of x264 benchmark is it)
http://img198.imageshack.us/img198/1...3780mhz270.png
To end i tested only few configurations, how good is IMC with CPU-NB at 1.425V? I got 2827 MHz at NB, think, it will stable
http://img580.imageshack.us/f/prime9...nbstables.png/
.. and in LInX
http://img535.imageshack.us/img535/9...425v2816nb.png
And than quickly benchmarks at 4100 MHz
http://img41.imageshack.us/img41/413...4mhz291.th.png
http://img691.imageshack.us/img691/1...4mhz291.th.png
[IMG]http://img17.imageshack.us/img17/135...y4104mh.th.png
http://img267.imageshack.us/img267/9...m4104mh.th.png