Cinebench R10 32/64 bit challenge AIR/watter here :)

Quote:

---

Originally Posted by Zeus

Thanks man. ;)

Do you reckon the MSI will unleash some untapped power?
If you idle around 18ºC you must be using a very nice chiller!

You'd rather call it cold water instead of cool. :) Any pics of that set up?

I saw that 14K run, unbelievable you could run it at 4280MHz! Did you have to back down all the way to 4.1GHz due to the 64 bit OS?

---

I don’t know about unleash but the MSI /965 combination, at first testing yielded a little higher clock than I have been able to get from the Gigabyte, so far.

MSI GD70/965be validation link
http://valid.canardpc.com/show_oc.php?id=661227

Yeah, it will idle at 18C+/- but at the hint of any processor activity the temp jumps into the mid 20’sC and I have no clue how high it gets under full load.

I use a small camping cooler with one swiftech radiator and one heater core from a Chevy van ($27) installed in the water cooling loop, these radiators are placed in the bottom of the cooler. I add just enough water to cover the radiators then fill the cooler to the top with ice. I use a swiftech pump and GTZ water block plus I insulate the water lines. Usually 22#’s of ice lasts six hours or more depending on the processor used, over clock and which tests are being utilized.

I’d love to have an OCZ Cryo-z but being that they don’t ship it and I don’t plan to drive several thousand miles to California to buy it, this looks like the best I’m going to do is Ice in a cooler for better cooling.

finnaly 16 000+ :D...tomorow il try 3900 MHz with air

http://img200.imageshack.us/img200/1...4bit3876mh.jpg

Looks good Flank3r.

Heres my entry

Phenom 965 x4
Asus M3A79-T D
2x2gb ddr2 1066

Cinebench Vista 64bit

http://i271.photobucket.com/albums/j...771/cine64.jpg

new one, think next will better, 3950 MHz is possible in x64 for me (with 1.52V)

16 455

http://img530.imageshack.us/img530/6...4bit3895mh.jpg

This wasn't exactly easy but in the end i managed to beat theoldtimer's 965BE.

http://img.photobucket.com/albums/v6...bench17871.jpg

I needed 15.5ºC ambient temps to do it.

Please don't beat this score, i hate to rerun it again. :D

17608
http://i31.photobucket.com/albums/c3...91cin17608.jpg
need to work the kinks out of the cooling, working on getting the temps below 0c

Looks like I need to find a way to get my system a little colder. I guess you guys aren’t interested in taking it easy on an old man? :D

Rest assured buddy i'm already over 40 so i'm an old man as well. :)

I think you did good enough, just leave it like this ok? :D

Great score equinox! :up:

Quote:

---

Originally Posted by equinox1

17608
need to work the kinks out of the cooling, working on getting the temps below 0c

---

Nice score man, but if your working on temps below 0c, I'm not sure you meet the Air/Water criteria... :rolleyes:

Quote:

---

Originally Posted by Zeus

Rest assured buddy i'm already over 40 so i'm an old man as well. :)

I think you did good enough, just leave it like this ok? :D

---

I'm probably older than both you guys.... Sounds like Zeus is scared to me Oldtimer (Evil Grin)... :yepp:

Just leave it like this... Huh? Chicken!! Hehe.... :rofl:

I still haven't seen anyone beat my 17255 with a 550X2 on water... :p:

ZEUS: im waiting at lower room temps and i can tryi t (with AIR :D ) :). To time i havent lower temps under 21C...:mad:

but, very nice scores!!!

Quote:

---

Originally Posted by Zeus

Rest assured buddy i'm already over 40 so i'm an old man as well. :)

I think you did good enough, just leave it like this ok? :D

Great score equinox! :up:

---

I don’t know if this 965 has anything for you ZEUS. Your score looks strong. I’ll tweak on it soon to find out. Equinox1 may be the one to watch.

Quote:

---

Originally Posted by Daveburt714

I still haven't seen anyone beat my 17255 with a 550X2 on water... :p:

---

That is a great score Dave and I won’t say for a 550, IMO that’s a great score for any Phenom II.

Me scared? no way! :D I just think this bench sucks as it is very very inconsistent and boring to watch too.

I think i'm gonna need a 965BE here, come on Simon. :)

Yeah equinox is definately a very strong contender but i think he is using chilled water like you, mine is water at it's purest, lol.

Hey Flank3r, show me what you got buddy, you think you can take my score down? That would be awesome, espcially on air.

I think you need to make a chart so i can be in the top spot! :rofl:

Seriously, a chart would be nice. ;)

Zeus:i think not, maybe with a luck i got 17 000 points and this will all for my chip :-/, u have great vcore for 4100 mHz, i need the same for 3900MHz in x64 cinebenh, or, how much helped u lower ambient temps?

I went from 4055MHz at 25-26ºC ambient to 4080MHz at 24ºC ambient and 4130MHz at 15.5ºC.

As you can see low ambient really helps. My temps never exceeded 35ºC during the cinebench runs at 4.1GHz+, idle was ~24/25ºC.

omg...it seems, your chip is 100 MHz better for hard testing. How is your max validation? Can u broken 4300 (maybe 4400 MHz)? And my tip: run CInebench, dont close program and run second it-second run is better score!

Thanks for the tip but i did that on a number of occasions but results were still inconsistent no matter what. It's just a matter of rerunning it till you finally pull off the score you're expecting. In my case 17K7 at least. :)

My chip isn't special really, i'd say somewhere in between average and good. chew* has a good one that will completely annihilate mine, i'm sure of that.

I don't know about validation, i don't really care about that but i would be surprised if it wasn't touching 4.4GHz. It ran SuperPi 1M at 4320MHz. (see sig)

Heh I should break TWKR out. 4.2 gig prime stable on water....wonder what it can do in cinebench :D

I might have sold or traded that 955......cant remember......I know it was a sad day when I ran cinebench on a 920 DO at stock last night :(......

Good Idea to allow for cool down times guys. AMD cpu's do have thermal throttling, which will impact results ;)

Zeus:your "crazy" chip must be stable 1h prime at 3900 MHz +, because my is at 3900 (3895) with 2665 uncore and u have higher Cinebench run.

Chew:good, 4.2 prime is very good :), u must post it :). Maybe CInebench at 4300-4350 MHz possible.

Quote:

---

Originally Posted by FlanK3r

Zeus:your "crazy" chip must be stable 1h prime at 3900 MHz +, because my is at 3900 (3895) with 2665 uncore and u have higher Cinebench run.

Chew:good, 4.2 prime is very good :), u must post it :). Maybe CInebench at 4300-4350 MHz possible.

---

Nah.....I could but.....not going to.

Ongoing research.

yes my water is chilled,but its water none the less. my chip needs cold so cold it will get. lol
17798
http://i31.photobucket.com/albums/c3...4/17798cin.jpg

Update

http://img171.imageshack.us/img171/1...eenshot442.jpg

equinox1, what kind of cooling are you running? Do you have a waterchiller or are you putting your rad in ice like theoldtimer does?

A pic of your setup maybe?

These Phenom II cpu's all love cold. ;)

Quote:

---

Originally Posted by equinox1

yes my water is chilled,but its water none the less. my chip needs cold so cold it will get. lol

---

Great score man! :clap: Almost 17.8k, NICE... :D
I'll cut you some slack, your right, even chilled water is still water....

I'm with Zeus though, I'd really like to see a pic of your rig....
I've been thinking about going colder... Was thinking about TEC's but I'm not sure they could handle a ~140w chip...

Well maybe a 400w Qmax TEC could, but the power requirements are getting kinda crazy as far as I'm concerned. It would be fun to play with, but not a good option for 24/7 clocks...

I'm a lil buzzed, and need to go to bed soon, but it's kinda cool here tonight, so I'm gonna see If I can beat my best (17255)... :p:

It may be a little OT, but pics of your rig would be really cool! :up:

i will put up some pics tonight, my chiller is an old 5000 btu ac unit i had laying around.
my biggest expense was the pump. its a little giant 4md.

Unfortunately I could not run a 64bit OS, but this is also not a valid run as it was done with DICE. But I think it is still good for a 32bit OS....he he he

Phenom II 955 @ 4.9Ghz DICE

15995

http://img22.imageshack.us/img22/9949/3345nbstable.jpg

nice, in x86 16 000 points :)

However.... It was done with DICE

ok guys,i put up pic"s here of my system.
http://www.xtremesystems.org/forums/...63#post4019863

Quote:

---

Originally Posted by equinox1

ok guys,i put up pic"s here of my system.
http://www.xtremesystems.org/forums/...63#post4019863

---

nice setup! it is really amazing how you can push these chips when the temps are below ambients, i tried it twice with an apogee drive and a cooler full of ice and i got idle temps at 3c and pi 32m at 11c running at 4.3+ ghz, maximum validation was at 4.4ghz win7 x64 :) really enjoyed that little moment (1.5hrs benching)

Quote:

---

Originally Posted by equinox1

ok guys,i put up pic"s here of my system.
http://www.xtremesystems.org/forums/...63#post4019863

---

That shows a lot of get your hands dirty ingenuity equinox1 and I can relate to that in a direct way. Here I am in the Stone Age (or maybe Ice Age in this case) placing ice on my rads in a camping cooler. I can’t get my system that cold yet, maybe in my unheated garage in January but not now, not here in September anyway. I’m impressed with your chiller, way to go man. Nice 3d06 score also. :up:

Very cool equinox1! :up: That is in a total different league than my plain watercooling with rads.

What waterblock are you using there? It was pretty unrecognizable with all the erasrer over it but it looks like an Apogee to me right?

Quote:

---

Originally Posted by Zeus

Very cool equinox1! :up: That is in a total different league than my plain watercooling with rads.

What waterblock are you using there? It was pretty unrecognizable with all the erasrer over it but it looks like an Apogee to me right?

---

yes it's an apogee gt. im a little concerned about it holding up but so far its been ok. cant seem to find anyone who makes a solid copper block anywhere.

I admire sheer amount of work needed to build that rack :clap:

Killer system and scores equinox1!

Quote:

---

Originally Posted by equinox1

yes it's an apogee gt. im a little concerned about it holding up but so far its been ok. cant seem to find anyone who makes a solid copper block anywhere.

---

The heatkiller 3.0 is a full copper block. ;)

Quote:

---

Originally Posted by Zeus

The heatkiller 3.0 is a full copper block. ;)

---

that will do the trick,thanks zeus. ordered and on the way.:)

You're welcome buddy.

ok so hows this one,so close to 18k but no matter what i do it just wont get there.
voltage is really at 1.65 in aod, cpuzdoes not register it correctly. i do like aod.
17965
http://i31.photobucket.com/albums/c3...1204/17965.jpg

today i tried Cinebench at 1.55V and 4 GHZ, temps was OK-56 C, but Cinebench program exit behind render (about 30s runs)...What does mean it?

Dave, my wife bought me one of those 550be’s yesterday so I tested it a little today. I thought maybe you were getting lonely.

Water cooling (cool water, rads. in ice water)

http://i262.photobucket.com/albums/i...4scorecpuz.png

Ha! Nice, another DualCore scoring better than my Quad :rolleyes: :p:

http://img101.imageshack.us/img101/1...t3978mhz26.jpg

i got 12927 points. dont know if this is any good? my first run in cinebench ever ^^ was done at 4ghz, with the rig in my sig. XP pro 32 bit..


http://geting.se/image.php/195900-cine @ 4ghz.JPG

yes, its very good for 32-bit OS.

OK :) nice ...

think i can squeeze some more mhz out of it.. its a very nice chip compared to my old 940.. and for only half the price. i will update when im in the 13K territory :)

And my Cinebench, only 12 914 poits (magical 13 000 in x86 :D)
http://img376.imageshack.us/img376/2...mhz2870mhz.jpg

Heres my X86 on cold air....but not fine tuned

http://slappa.ln2cooling.com/qdig-fi...rg_13298CB.png

Well even though the score is not the highest I imagine you could appreciate the way I did it ;)

(hint: in the center of the image at the very top)

17 350, whau, nice 1

Hi

I bougth 6 phenom II X2 540 last week for my company. 3 of them I managed to unlock 4 cores 100% stable :)

I don't have the screens, but at default speed (3ghz) with 4gb DDR3 785G they managed 98xx score. About 1m33s. For reference our Q9650 2.8ghz did 1m11s. Not bad for 78€ cpu lol

@Ben Brown - LogMeIn love! :D

So from what machine you were logging?

Quote:

---

Originally Posted by Lightman

@Ben Brown - LogMeIn love! :D

So from what machine you were logging?

---

From my pc at work :D

new score

http://i271.photobucket.com/albums/j...1/cine64-1.jpg

very nice Titan 17 500 attacking :). I hope, with C3 revision and AIR il get the same :p:. Now im in work and waiting and wating, meantime nothing :shrug: (14 days waiting )

Quote:

---

Originally Posted by FlanK3r

very nice Titan 17 500 attacking :). I hope, with C3 revision and AIR il get the same :p:. Now im in work and waiting and wating, meantime nothing :shrug: (14 days waiting )

---

no tracking # from post?

18841
965c3 rocks,4368mhz in 64bit w7 cpu voltage at 1.575
http://i31.photobucket.com/albums/c3...4/18841cin.jpg

Hah you guys on 64 bit are creeping up on my 32bit ln2 scores.

Nice work :up:

whau, its magical score :). Hope to with my C3 il broke 17 000-17 500 with AIR.

Max with 1.5v.. done with 25c ambient and Noctua NH-D14.
http://www.aijaa.com/img/b/00426/5379316.jpg

http://i271.photobucket.com/albums/j...nch6418580.jpg

nice Asmola AIR and Titans watter! I think Titanm, u can hit a bit more (202 busspeed :) )

Quote:

---

Originally Posted by FlanK3r

nice Asmola AIR and Titans watter! I think Titanm, u can hit a bit more (202 busspeed :) )

---

need more ice:p:

hehe :) I have only this one. Its hard with my C3 0942 series

http://img269.imageshack.us/img269/4...080mhz2856.png

http://img17.imageshack.us/img17/555...mhz2871mhz.png

think, i have chance hit in x64 at 4100MHz and at x86 4140MHz, not more :(.

With a little help of mother nature:

http://img.photobucket.com/albums/v6...bench32bit.png

32bits. :)

Booted straight into windows at that speed!

omg, nice 4430 MHz x86 Cinebench

I knew you would like it. :D

Sweet score Zeus!

Thanks Titan. :)

Okay here is another air test at 4.2Ghz 3000mhz NB but this time Cas 6 @ 1600mhz.

Still air cooling (True 120 Black)

http://img69.imageshack.us/img69/7613/cinebench3.th.jpg

Here's mine x86 Cinebench result.

http://img69.imageshack.us/img69/5169/cinebench.th.png

Not the greatest one and also not the greatest score, but hey..still a nice C2 chip :)

Cinebench x86 13 456points
http://img94.imageshack.us/img94/478...160mhz2842.png

And the same clock in x64 17 284p
http://img339.imageshack.us/img339/6...4160x64run.png

Hey Flank3r here's one final run from me to convince you to ditch the AIR and go watter! :D

http://img.photobucket.com/albums/v6.../cine14697.png

:)

whau, your chip is so strong with AIR!!

since we have not touched this bench for a bit, how about an update
19225
http://i31.photobucket.com/albums/c3...l/19225cin.jpg

Broke 17k today

zeus, what volt? i dont believe cpuid :D

1.55V. Don't know why CPU-Z showed 1.475.

I wonder, if 1055T and 1090T could break 20K on a decent 890 board with 8-8-8-20 2000MHz rated RAM...

Only one way to find out.

You won't need a 890 board nor DDR2000. Just give me a Thuban and i'll show you 20K. ;)

Quote:

---

Originally Posted by initialised

I wonder, if 1055T and 1090T could break 20K on a decent 890 board with 8-8-8-20 2000MHz rated RAM...

---

22K+ with the CPU at 4000MHz and memory below 1600MHz. :)

Quote:

---

Originally Posted by initialised

I wonder, if 1055T and 1090T could break 20K on a decent 890 board with 8-8-8-20 2000MHz rated RAM...

Only one way to find out.

---

I would sure think so as equinox1 and myself have both scored more than 19K using the 965-C3 on chilled water.:yepp:

Praz: yes, maybe a bit more.

Seems like multiple runs boost the scores considerably. Essentially pre-loading the caches I guess?

Cinebench R10 has to be the most predictable benchmark out there. Take the total clock of any Phenom X4 and multiply it by 1.03-1.08 for your score. CPU-NB overclocks and repeated runs account for the small variation.

Dedicated to FlanK3r :up:

http://img294.imageshack.us/img294/3...10x6426ghz.png

Uploaded with ImageShack.us

With a bit of tweaking 25000 is possible.
I will do it maybe even this night if not then this week for sure :)

looks like we need to have the CB10 25K club thread started soon

omg, nice...maybe second run, which is better than first! Or 1.55V and 238x18 :)

:D

http://www.abload.de/img/cb-1w2vu.png

Quote:

---

Originally Posted by FlanK3r

omg, nice...maybe second run, which is better than first! Or 1.55V and 238x18 :)

---

It's done!
http://img46.imageshack.us/img46/844...10x6428ghz.png

Uploaded with ImageShack.us

You can see also few more results from me on this pic :rolleyes:

@Chri$ch

Very good efficiency :eek:

What memory chips and voltages?
For some reason my Rpijaws don't want to go much over 1800 CL7 and they not stable 1600CL6 even at 1.675V ... Might be to do with memory slots I'm using, because I can't install them into first channels due to Ultra 120 cooler.

Memory is a tripple channel kit from mushkin, DDR3-1866 8-9-8-24 with elpida bbse ICs.

voltage is ~1.75v (they need more vdimm on amd as on intel).

my 4GB mushkin DDR3-1600 6-8-6-24 kit won´t clock that nice :(

btw, the 1866 can also do a little bit more

http://www.abload.de/img/maxxmem-2qhvz.png

Thanks guys for broken 25 000! Lightman, your chip is one from the best think, what series? What i to time seen, the best looks 1010 and 1012...Last 1015 i seen not much, maybe only one. My chip will for some days, but i havnt new mobo....

Quote:

---

Originally Posted by FlanK3r

Thanks guys for broken 25 000! Lightman, your chip is one from the best think, what series? What i to time seen, the best looks 1010 and 1012...Last 1015 i seen not much, maybe only one. My chip will for some days, but i havnt new mobo....

---

My chip is in my Avatar already. 1012 :up:

25k in Cinebench, awesome. I can't even hit 24k with my crap ram.

On the very first night of playing with my new Crosshair IV and Thuban i think i already established a nice score. :)

http://img.photobucket.com/albums/v6...bench1025K.png

There's more in that cpu for sure.

Nice start zeus , make the ram 950 cl6 :)

20MHz more on cores and 0.33V less than my run :up:

Really nice :up:
How you're cooling it if I may ask?


Oh, and I can do 3.1GHz NB as well, just let me swear few moments at my computer :p:

Nice score Zeus, great processor isn't it. :)

I need better RAM, use guys are killing me with those awsome timings :up:

http://3800z24.info/Phenom/1090T/4.2-3000NB-CB1064.jpg

Quote:

---

Originally Posted by initialised

I wonder, if 1055T and 1090T could break 20K on a decent 890 board with 8-8-8-20 2000MHz rated RAM...

Only one way to find out.

---

how about 23,000 at 4ghz:D

http://i271.photobucket.com/albums/j...n771/23000.png

I just updated the one above with a 24310 run. Same setting, CB 10 was not consistant with score.. but never has been ;)