Try other bios for RE best is 0121.....
Printable View
Try other bios for RE best is 0121.....
But i have a Rampage Extreme X48, so no Rampage II Extreme.
If you mean bios 0121 for my board, that bios is only good for 1M and besides, i could not change multuplier in that bios. :shrug:
Thanks for the suggestion though. ;)
Yes this is the best bios for 1m ....for 32m I always go for last available ...
p.s.
RE not RIIE (RIIE is on the bench table at the moment so I made this typing mistake) ..I made a change on post above.. :)
PL8 would make a nice difference. Also try killing some services and chopping off a bit your OS.Quote:
Originally Posted by Zeus
PL8 at 630+ FSB ain't gonna happen for me, at least not with this (water)cooling i'm using. ;)
Do you know what services i can disable to gain some seconds and what to chop off?
I disabled some services with zero gain. Als tried to disable the clock in the taskbar and disable the quicklaunchbar without any gains. :(
hey guys
just fired up this Asus board as i need to use it tomorrow on a show
and as all Asus boards it gets you suckered into SuperPi lol.....i dont have a lot of time on it but here is a start for 7.xx category :)
unfortunately this bios is missing a couple of values i need and i havent tested many combinations to see what works best but this sob has some potential anyways heh
why is CPUTweaker locked on this board WTF....:confused:
4354.9......dinos22............7.59.985....25x174 ....1045mhz.....7-7-6-20....2/12....X58
http://img22.imageshack.us/img22/420...5s32msuper.png[/QUOTE]
Read that it is (or was by now, not sure) not possible to change timings with cpu tweaker on any Asus board.
My OS must be really cr@p for 32M, i just cannot touch the efficiency of the likes of Kintaro, cheapseats, ToyTen or 3oh6, not even close! :mad:
Did a desperate attempt at sub 11 minutes with 4x1GB CSX Diablo.
I was actually able to run the timings as tight as a virgin despite 4 sticks of ram!
http://img.photobucket.com/albums/v6...Msub113969.jpg
Efficiency still sux though. :(
This time i disabled a hell of a lot services, killed a lot of processes, killed explorer, quicklaunch bar, clock.
Olive theme, maxmem 600, copy waza, pi_rec from cheap, pagefile 512-512, realtime prio, core affinity, etc.
I even uninstalled my ati vga driver!
:shrug:
Managed to shave of 1 notch of FSB, from 7x567 to 7x566:
http://img.photobucket.com/albums/v6...32M1059906.jpg
:)
For 16x
4027......geobot24............16.59.344....20x201. ...805.4mhz.....7-7-7-21....1/4....AM3
http://www.hwbox.gr/attachments/hwbo...ge-955_lcc.jpg
For 17x
3737......geobot24............17.59.281....18.5x20 2 ....808mhz.....7-7-7-21....1/4....AM3
http://img263.imageshack.us/img263/3...lcc1759281.jpg
Way to go my friend George :up:
Moar, moar :D
Thanks mate!!
One more run from today with lower cpu frequency but with more memory:D:D
3977.5......geobot24............16.59.453....20x21 5.....860mhz.....7-7-7-21....1/4....AM3
http://img109.imageshack.us/img109/9531/955lcc16x.jpg
After tweaking and trying for almost 2 days i finally am in the same ballpark as the 32M big guns for efficiency. (well, almost)
Still not on top but better than i've ever had it. :)
I lost count of the number of 12.00.xxx runs i had but i can assure you it was more than 10. :D
http://img.photobucket.com/albums/v6...12min35576.jpg
The trick was to set AI clock twister from light to moderate, stopping about 15 services, checking the CDT box of SPi tweaker and some more tricks.
I think i can take a rest now. :D
3798,2......Oldscarface......16:59:953......262x14 ,5......873,4mhz......6-5-6-18-1T......3/10......AM3
4075,7......Oldscarface......15:59:688......263x15 ,5......876,7mhz......6-5-6-18-1T......3/10......AM3
4418,9......Oldscarface......14:58:563......260x17 ......866,7mhz......6-5-6-18-1T......3/10......AM3
hey Old
what cooling do you have on the CPU :)
I use a SS Phase changeQuote:
Originally Posted by dinos22
With (chilled) air I can reach approx. 3050-3100Mhz NB.
Up till now I did not test Superpi 32m with air, perhaps I wil do that later on.
great
dont waste time with air....it's always better subzero :D
i gotta do some efficiency testing soon when i find a suitable C3 chip and do some comparisons with a couple of different boards
looks like you set some kick ass benchmarks to go by....i like it :D
That is also mine idea :DQuote:
Originally Posted by dinos22
I had used the setup for the LCC 3DMARK05, so I thought why go back to air. :)
Which boards are you goin to test and thanksQuote:
Originally Posted by dinos22
giga & asus top end stuff mate
4398.7......kintaro.............7.58.203....21x209 .5 ....1047.4mhz.....6-8-7-20....2/10..X58
3442.2......kintaro..........09.58.234....17x202.5 ....1012.5mhz.....7-7-5-20....2/10..X58
3112.2......kintaro..........10.57.219....15x207.5 ....1037.4mhz.....7-7-7-20....2/10..X58
2834.7......kintaro..........11.58.157....14x202.5 ....1012.5mhz.....7-7-5-20....2/10..X58
3431.2......kintaro..........09.59.984....16x214.5 ....1072.3mhz.....8-8-6-22....2/10..X58
my new corsair ram looking very promising:)
nice :up:
3097.0......kintaro..........10.59.563....15x206.5 ....1032.4mhz.....7-7-5-20....2/10..X58
aaaarrgghhh you "filthy" man Vaggelis(kintaro) :p::D
Wish my chip had more bclk and uncore to compete you :p::)
Now I'm here.....
http://img704.imageshack.us/img704/6623/959156s1.jpg
P.S: Nice choice to go with the corsair rams:D
nice to compeat with you sofos:D
do you think that this version of xp will give you the magic boost?
start over trying our own GREEK ed. and let us know results.
meanwhile i'm enjoing my christmas present (corsair). is absolute fantastic for me.
:rofl:Quote:
Originally Posted by kintaro
nice present vagos!welcome the new rams(corsair)in 2 weeks the rams if you play like this its burn:rofl:
only greek windows is the best !:up:
TW server 2k3 is faster than all the others editions I have tried:)Quote:
Originally Posted by kintaro
It's only matter of time to try the Greek edition, hope to be the fastest:)
I received Greek edition 2 days ago so I hadn't so much time:)
I'm proud to compete with you and all the other guys here:D
P.S: The Santa Claus came earlier this year lol...:p::D
sofos server 2k3 is faster in 32m only in the first 3 loops then the windows xp is very faster!Quote:
Originally Posted by sofos1990
you can't make blanket statements like that. i can make 2K3 faster than XP and XP faster than 2K3, it all depends on how the OS is setup. there is much more to the OS than what version it is. some people can make a really fast XP, some can make a really fast XP...there is no definitive faster one :up:Quote:
Originally Posted by TONY GAL
my friend 3oh6 i speak only default without tweaks.he is my opinion!
goodknight from greece guys!
but what's the point of that :DQuote:
Originally Posted by TONY GAL
with that said, 2K3 was actually faster out of the box back in the day because it came default with LSC enabled...XP
didn't and that made it much slower. but that was around XP SP1 time so who knows with SP2+.
**PS what happened to this place, it stretches all posts again instead of just the post with the big image..that sucks
i speak with windows xp sp3 not sp1,sp2,.
i try many 2k3 with all tweaks i know ,lsc,max mem,page file++and all the same tweaks in windows xp sp3 and i see that xp is faster in the end,only in first 3 loops 2k3 is a little faster!i say again he is my opinion in 32m and always with velociraptor:)
anyway !:up:
nice PP Kintaro :D hope the Corsair works well for you man :up:
guys what's the Greek edition OS ?
i only have XP here.. :up:
8.xx (45nm/i7)
3824.2......cheapseats..........8.59.906....18x213 ....1062mhz.....7-7-5-20....2/10..X58
XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
1 disk / 2 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file) D>C (SPi C)
RTL 55-57-59
http://i447.photobucket.com/albums/q...2M_8m59906.gif
7.xx (45nm/i7)
4348.9......cheapseats..........7.59.922....20x218 ....1087mhz.....7-8-6-20....2/10..X58
XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
1 disk / 2 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file) D>C (SPi C)
RTL 55-57-59
http://i447.photobucket.com/albums/q...2M_7m59922.gif
very nice cheapseats i gotta dust off the pi rigs soon :p:
how much of a difference can you make to an OS if you set it up properlyQuote:
Originally Posted by 3oh6
not sure how much you wanna give away in what you setup but at least in time differences would be good to see
for example stock OS with usual tweaks that ppl would use say LSC 512-512 maxmem around 600-700 compared to your tuned OS
are we talking a few seconds or less?
ah man, i wouldn't even know where to start guessing from. i haven't done a comparison like that since E6600/QuadGT days. not even sure what i could dig up from screen shots would be relevant.Quote:
Originally Posted by dinos22
if i had to guess, i would say at least 3-4 seconds give or take. it isn't going to be night and day but certainly substantial enough. with i7 though, that number could easily be cut in half, hard to say really.
most of the setup use to be about getting the OS to get the most out of copy wazza, again, that isn't so much the case with i7 anymore i don't think :shrug:
We've seen in the gigatweaking event Dino, that a system that was booted in diagnostic mode to be several seconds faster than the more tweaked ones (and faster ones on paper lol)... I always tried that and always was it slower...go figure...
Till now my I4memory aka eva2000 XP OS is amasingly fast for pi32, beats my teammates tuned server 2003 clock for clock. Yet I seem to get asswhooped by that taiwanese or chinese version lol
Andrea Yang edition FTW!
funny thing about those OS's.....it is so easy to destroy the "natural" speed boost they tend to show over other OS's altering even the smallest little thing. Really though, when it comes to the sever/xp efficiency debate both OS's can be chopped down to the same efficiency IMO. I feel that there is a "ground zero" with regards to OS efficiency. It just boils down to finding that efficiency fighting through so many variables and different routes that can be taken to get there it can be mind boggling....Quote:
Originally Posted by Gautam
Yep fully agree. That's why I basically don't touch my OSes at all for 32M. (Go on, chuck your tomatoes at me)
Lee i know
that was a total fluke basically because everyone in this thread knows that just wont work obviously so either they are not telling the whole story or something was totally :banana::banana::banana::banana:ed up with the OS in first place
Jody time to start some new comparisons hehehe
thanks cheapseats.Quote:
Originally Posted by cheapseats
i notice you post some amazing 7xx 8xx:shocked:
you are always one step ahead.
i'm thinking over and over if it is going to be fatal vdim over 1.75 :shrug:
not quite what you were looking for but i am getting back into the swing of things which is the first step.Quote:
Originally Posted by dinos22
spent some time on a SPi OS...still using my E6600 32M OS up to this point. nothing like a little quality in an OS that
you don't understand a word in. coming along nicely but i still feel like there should be another couple seconds in this
setup. could just be the Classy (759) and this old ass BIOS showing their age.
EVGA X58 3xSLI Classified 759 (OG version)
Intel Xeon W3540 (3845B010)
Chilly1 SS tuned by ruffus
OCZ Blade 3x2GB PC3-17000 8-9-8 (OG Elpida Hyper)
Gigabyte GTX 260 OC (GOOC 09 edition) - can't get PCI to work with this OS
Seagate 7200.9 80GB SATA2
Taiwanese 2k3 - 3oh6 edition (work in progress) :up:
3426.3......3oh6................9.59.234....15x228 ....1142mhz.....8-9-8-20....2/10..X58
click for full size...
http://3oh6photos.com/forum_post/xs/...59-234-1sm.png
and just for comparison to the 16X multi...
click for full size...
http://3oh6photos.com/forum_post/xs/...58-797-1sm.png
NOT "the good run" but it's "something" I think....
Low ram frequency and low Uncore..... :p:
Next week that I'll have LN2 to freeze it, I'll be back... :p:
EDIT: I forgot....... ENGLISH Windows XP.... :D
3425.5..........hipro5.........9.59.375....17x201. 5.....1007.5mhz....6-7-5-18....2/10....X58
http://www.hipro-tech.com/images/hip...M_9.59.375.png
I'm curious, what vdimm for that?
damn George, you make us all look weak...but using a 975 is cheating :D
wouldn't mind knowing volts of the memory as well, killer stuff :up:
Jody and George shoulder to shoulder, great... :D
*Updated from #88 to #112*
--> Thanks for all your results and special Thx to those, who try to help me and follow the scheme. :yepp:
I will try to lower the arrear I had when I started this thread, so we can start into 2010 with a late breaking list.
@ Hyperhorn: I edited my score adding "the scheme"......sorry..... :(
Volts on the dimms ehhh?.....To be honest, I was curious too... :D
....so I fed them with 1.9Volts...... FIRST time on these rams....
I used to work them with 1.743Volts and I said: "What the heck!"..... :D
They can do 32M @ 1104MHz at 7-7-6-20-1T-60 at only 1.78Volts and 7-7-5-20-1T-55 at 1.81Volts... :D
P.S. I have BOUGHT these rams - they are NOT samples that were sent to me - just "regular pieces"..... :D
Hyperhorn, thanks for updating but i also had 11.xxx done at 3557MHz, see post #113.
I hope you can change this with the next update?
Hyperhorn, could you also please update mine scores the next time.
post # 114 till post # 116.
Exactly like mine :DQuote:
Originally Posted by hipro5
But I refuse to go any higher than 1.76v :sofa:
Look at all the fun you miss Gautam :p: Feed them with more voltage asap :DQuote:
Originally Posted by Gautam
I know I'm asking from you to brake the rules you have, as far as high DDR3 voltage and SuperPi 32M are concerned :ROTF:
after killing one of my 2200 sticks from these new batches i think Gautam is probably doing a smart thing heheh
i reckon i might do the same with the replacements........1.76v absolute max unless RAM under cold heh
How much voltage did you use dinos ?Quote:
Originally Posted by dinos22
How about I just go for hipro's score with <1.75v? :p:Quote:
Originally Posted by George_o/c
air mostly 1.8-1.85
it died at stock settings on MSI P55-GD80 so it most probably was the damn board that ate it but still
From the new batches and it was killed?.... :(Quote:
Originally Posted by dinos22
Are you trying to scare me now?.... :(
1.75V!.......:banana::banana::banana::banana::banana:yyyyyy........ :p: :DQuote:
Originally Posted by Gautam
yeah new batch George
3425.4......kintaro..........09.59.703....17x201.5 ....1007.5mhz.....6-7-5-18....2/10..X58
thanks for update Hyperhorn :up:
Dino and kintaro, thanks guys :)
-----------
not for update
11.xx
http://i447.photobucket.com/albums/q...M_11m59047.gif
10.xx
http://i447.photobucket.com/albums/q...M_10m59391.gif
11.xx (45nm/i7)
2813.8......cheapseats.........11.59.921....13x217 ....1082mhz.....7-8-6-20....2/10..X58
XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
1 disk / 2 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file) D>C (SPi C)
http://i447.photobucket.com/albums/q...M_11m59921.gif
10.xx (45nm/i7)
3086.1......cheapseats.........10.59.546....14x221 ....1102mhz.....7-8-6-20....2/10..X58
XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
1 disk / 2 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file) D>C (SPi C)
http://i447.photobucket.com/albums/q...M_10m59546.gif
Great results from both of you Vaggelis and Nick :up:
wow this thread saw some major action past few days!! great scores everyone :up:
I gotta get my butt in gear and start 32M'ing it again
3847.1......kintaro..........08.58.656....19x202.5 ....1012.5mhz.....6-7-5-18....2/10..X58
i7 950....10x....206,5x15......3096,6......10,59,672. ....1032....7-7-5-20....x58
11x....TONY GAL....2813,8...216,4x13.....11,59,843.......1082. ..7-7-6-19 x58
i7 950 ...9x....3425,2....09,59,328.....TONY GAL.....1007...6-7-5-18..x58 evga
1.76 max for ddr3 i think not ( i put 3.8v through my old corsair xms3 dhx rated for 1.8v and it still works and i still have it) now that's overvolting
but i do not understand how this works so i will not be entering
Greeks are ON FIRE....... :D
3399.5......hipro5..........9.59.922....16x212.5 ....1062.4MHz.....7-7-5-20....2:10..x58 EVGA Classified 4-WAY SLI
http://www.hwbox.gr/attachments/hwbo...m_9.59.922.png
5.3ghz nb-----wow! awesome run hipro
greece are crazy with 32m!:D
i7 950...8x...3846,6......202,5x19.......08,58,531... .TONY GAL....1012,5...6-7-5-18...evgax58
some little better 8x
i7 950...8x...182,5x21....08,59,547.....3833,1...TONY GAl....1095...7-8-7-20...evga x58..E760
liitle better 7x
dinos22 i try to catch you but i dont have 25 multi:D:up:
i7 950...7x...4356,8...181,5x24....07,59,531....1090. ..7-7-7-20..evga x58 E760
i7 950...9x...3415,2...213,5x16....09,59,891....TONY GAL...1067,4...7-7-6-20....evga x58 E760
*Christmas-Update from #113 to #173* :D
But the credits go to cheapseats who sent me an updated list via PM, so I only had to double-check it and correct a few things.
@hipro5: hipro-tech.com shows "Website Disabled" so your image is gone, too. :( Please edit a working link/forum attachement at this posting, so that we can see your magic again. Thanks in advance. :)
Not a submission.
More or less showing some of the AMD guys the right path and working on my own effeciency.
http://chew.ln2cooling.com/XS%20low%...0clock%204.JPG
http://chew.ln2cooling.com/XS%20low%...0clock%203.JPG
*Updated from #174 to #184* (not included: #174 - CPU-Z/Mem is missing)
--> As promised no backlog in 2010 :)
7χ...ι7 950...07,59,968...217,4χ20...4348,9....1088...7-7-7-20....TONY GAL...X58 evga
6χ...ι7 975...06,57,281...219,4χ23...4827,8....1097...7-7-6-20....Mike...X58 evga
http://img25.imageshack.us/img25/1171/5732m.jpg
Wow...way ahead of the pack :surf:
*Update*
@ mike: Sorry, but I can`t take on the score.
Quote:
Originally Posted by Rules
2813.8......kintaro..........11.59.453....13x216.4 ....1082.2mhz.....7-7-6-19....2/10..X58
i7 960 ..TONY GAl...216,4x13..2813,7.....11x..11,59,312...1082.. 7-7-5-20...evga x58
i7 920 ..Marcolecorse...224,3x21..4710,7.....11x..7,59,75 0...897.. 7-7-7-18...Asus P6T SE x58
Yeah, no worries at all, becuase at this point I am pretty sure that that run was actually just as bugged just like this one:Quote:
Originally Posted by Hyperhorn
http://img199.imageshack.us/img199/7622/buggedj.jpg
Something happens close to the uncore limit that causes some timers to get really messed up. So please disreagrd both of these!
this would be a nce submission - no? Good thing it doesn't show CPU tweaker...and invalidates it too. BTW out file is valid after these bugger runs
http://img199.imageshack.us/img199/5986/558ys.jpg
2813.6......kintaro..........11.59.188....13x216.4 ....1082.3mhz.....6-7-6-19....2/10..X58
Quote:
Originally Posted by kintaro
nice clock
Vdim ?
VTT ? Voltage
3092.1......kintaro..........10.59.187....20x154.6 ....1082.3mhz.....6-7-6-20....2/14..X58
3415.2......kintaro..........09.59.875....16x213.5 ....1067.4mhz.....6-7-6-20....2/10..X58
3824.2......kintaro..........08.59.562....18x212.5 ....1062.3mhz.....6-7-6-19....2/10..X58
wow kintaro your kit is something else :D
also, it's appreciated that you haven't taken the CPUZ read any lower for your 9.x and 8.x cheers .. :up:
11.x @ 2813.7 and .6 .. CPUZ not low enough on mine, so new tRCD 7 run
only @ 2813.8 and time is 'blocked' by 0.2mhz CPUZ, oh well
--------------------
(not for update)
still going with the Blades :)
8.xx
also now using 2 disks
http://i447.photobucket.com/albums/q...2M_8m59265.gif