@ mel12yan
You're lucky that concentrated power of jealousy can't kill :up:
PS. Give us some hope and say it was laser'd and not engraved manually >.<
Printable View
@ mel12yan
You're lucky that concentrated power of jealousy can't kill :up:
PS. Give us some hope and say it was laser'd and not engraved manually >.<
Some nice stackers here
tis a pitty the cm stacker series have been discontinued :(
i still love mine :D
http://i276.photobucket.com/albums/k...9/cablemg1.jpg
http://i276.photobucket.com/albums/kk34/darra69/2-8.jpg
http://content.ytmnd.com/content/7/b...87cc8ff339.jpgQuote:
Originally Posted by elite.ire
Are you serious?! :down:Quote:
Originally Posted by Cpl Ledanek
Seems like we've got a collector's items on our hands, gonna be worth a fortune in a decade... or a century :D
ye has been discontined according to coolermaster themselves,
the haf provides greater airflow than the stacker
and there new flagship case is the atcs 840.
thanks guys!.. everyone in this site inspires me!.. thanks to my friends who helped me build my humble rig...
i'll post my upgrade soon...
@sithdarklord: i really want that your stacker..i hope i could find one of those.. "thats the original stacker!" very nice!...
another shot...
http://i6.photobucket.com/albums/y21...r/IMG_1292.jpg
I love my Stacker. I just need to take some better pics of it and clean up the wires a little more.
http://photos-a.ak.fbcdn.net/hphotos...88_93789_n.jpg
http://photos-b.ak.fbcdn.net/hphotos..._7599260_n.jpg
http://photos-c.ak.fbcdn.net/hphotos..._2808070_n.jpg
http://photos-g.ak.fbcdn.net/hphotos..._5839736_n.jpg
@ nypunkgeek
Are you sure you've got enough LEDs and fans? :ROTF:
Can't wait till I'm done with my Stacker >.< if I didn't run out of epoxy resin yesterday my glassfibre radbox would've beed ready now...
Edit:
How is the Typhoon?
http://img16.imageshack.us/img16/7684/img0652olu.jpg
http://img24.imageshack.us/img24/5048/img0645t.jpg http://img24.imageshack.us/img24/917/img0618pqf.jpg
http://img17.imageshack.us/img17/1667/img0573bzs.jpg http://img6.imageshack.us/img6/7646/img0586ybe.jpg
http://img6.imageshack.us/img6/8784/img0589k.jpg http://img12.imageshack.us/img12/8824/img0603i.jpg
@rioja: nice set up!... i love the interiors and of course the watercoling! :D
top view..
http://i6.photobucket.com/albums/y21...r/IMG_1368.jpg
Wow, not a very smart move... Ah well.Quote:
Originally Posted by elite.ire
No way, can't be... Must be Cosmos.Quote:
Originally Posted by elite.ire
My Stacker built after repaint and some cuttings...
http://i228.photobucket.com/albums/e...1616Medium.jpghttp://i228.photobucket.com/albums/e...1615Medium.jpg
http://i228.photobucket.com/albums/e...1647Medium.jpghttp://i228.photobucket.com/albums/e...1647Medium.jpg
Nice layoutQuote:
Originally Posted by mel12yan
going to be getting mine painted white and finishing up the mods
I'm going to need to copy this design. That is clear tubing with a Clear/UV Blue dye, correct?Quote:
Originally Posted by GameGuru
I am about to pick up a CM stacker 833 evo before they stop retailing them,i mean they are some of the best looking cases around cant beleave they would swap this with that horrible HAF :eek:
this is my first and true mod and built of my work, hope its a good for a start :) ( my thanks go to george :) )
http://i25.tinypic.com/vzg934.jpg
http://i28.tinypic.com/35cq6b5.jpg
http://i26.tinypic.com/2m5dzcj.jpg
http://i25.tinypic.com/2yto8d0.jpg
http://i32.tinypic.com/2nit9bb.jpg
http://i26.tinypic.com/257ogfq.jpg
http://i30.tinypic.com/r0p2xt.jpg
http://i26.tinypic.com/2je70o5.jpg
http://i32.tinypic.com/2r6fq6u.jpg
http://i31.tinypic.com/29w5ow4.jpg
http://i27.tinypic.com/ao5eh5.jpg
http://i26.tinypic.com/20j5z4x.jpg
http://i28.tinypic.com/mr8zec.jpg
http://i195.photobucket.com/albums/z...9/DSC03459.jpg
http://i195.photobucket.com/albums/z...9/DSC03461.jpg
http://i195.photobucket.com/albums/z...9/DSC03460.jpg
http://i195.photobucket.com/albums/z...9/DSC03465.jpg
http://i195.photobucket.com/albums/z...9/100_0726.jpg
http://i195.photobucket.com/albums/z...9/DSC03475.jpg
http://i195.photobucket.com/albums/z...9/DSC03473.jpg
http://i195.photobucket.com/albums/z...9/DSC03470.jpg
My Stacker, AMD Dragon build.
http://i200.photobucket.com/albums/a...t/DSC_2381.jpg
http://i200.photobucket.com/albums/a...t/DSC_2383.jpg
nice stacker bro!..
Thanks bro :)
Stacker 830 Black Aluminum ATX Full Tower , W/O window W/1000w PSU - Refurbished with Real Power Pro 1000 PSU for $199
[RC-830-KKR3-GP]
just in case someone is looking for this case:up:
And... ordered. Wow, that felt like stealing. Free shipping too! Hopefully the refurb doesen't bite me in the ass.
http://cmstore.coolermaster-usa.com/...roducts_id=365
check this stacker out....$99
http://cmstore.coolermaster-usa.com/...roducts_id=169
classic 810 stacker 810....$69
Great looking stuff guys. CM Stacker sure was a hell of a case.
It still is :)
might as well post mine in here..its been a while
http://i285.photobucket.com/albums/l...cture005-1.jpg
[IMG]http://soundrent.net/gallery/albums/.../10001/232.jpg[/IMG]http://soundrent.net/gallery/albums/.../10001/229.jpghttp://soundrent.net/gallery/albums/.../10001/234.jpghttp://soundrent.net/gallery/albums/.../10001/305.jpghttp://soundrent.net/gallery/albums/.../10001/317.jpghttp://soundrent.net/gallery/albums/.../10001/318.jpg
That stacker really gets around. :D
....pls don't tell me this taken on Valentine's Day, coz it sure looks like "a date" ;)
AWESOME!!!!:up::up::up:
does the evga classified 4 way sli fit in it? I love this case! I find it perfect! the best of all
Sugira uma tradução melhor
You won't be able to get a 2 slot videocard in the last slot. But otherwise it will.Quote:
Originally Posted by LeandroJVarini
O and i guess I could post my system here, although I just did post it in the computer & workstation thread :p:
http://i18.photobucket.com/albums/b1...ified-Full.jpg
http://i18.photobucket.com/albums/b1...fied-Close.jpg
http://i18.photobucket.com/albums/b1...ed-Close-2.jpg
@jbl2226h: nice rig and nice shots bro!..
heres mine..
http://i6.photobucket.com/albums/y21...p/DSC08130.jpg
http://i6.photobucket.com/albums/y21...Set-Up/aaa.jpg
http://i6.photobucket.com/albums/y21...p/DSC08314.jpg
03.39
very nice build lowfat
all you need now is black pcb VGA with some reb BGA heatsinks...
and also why did you sleeve those cables partially gray?
(i assume in order to match the exterior color )
but wouldn't it be better if you went black all the way?
It is the red that I want to get rid of. The red ram is already gone. All I need to do now is get rid of the NB heatsink and throw in another card in the other expansion slot.Quote:
Originally Posted by SlackerXL
Here are some new of mine :)
http://soundrent.net/gallery/albums/.../10001/341.jpg
http://soundrent.net/gallery/albums/.../10001/354.jpg
http://soundrent.net/gallery/albums/.../10001/408.jpg
http://soundrent.net/gallery/albums/.../10001/377.jpg
http://soundrent.net/gallery/albums/.../10001/383.jpg
http://soundrent.net/gallery/albums/.../10001/386.jpg
http://soundrent.net/gallery/albums/.../10001/394.jpg
http://soundrent.net/gallery/albums/.../10001/401.jpg
http://soundrent.net/gallery/albums/.../10001/404.jpg
http://soundrent.net/gallery/albums/.../10001/406.jpg
http://soundrent.net/gallery/albums/.../10001/427.jpg
i was looking for those hard drive enclosures but i cant find them anywhere in stock in the US...i had a nice idea to use those..also very nice case..i love the black int/ext combo
Posted these in liquid cooling a while ago. But it was the original stacker thread that convinced me to go with the stacker for my first wc. So it's cool to be able to post here finally. Enjoy
Attachment 102685
Attachment 102686
Attachment 102687
Attachment 102688
Attachment 102689
anyone who have file : Sketch up Coolermaster Case (Original) to me please becuause now i using my case and i need adjust database but i didnt have any detail then send file to me please
Thank you . . .
Anyone know whats the best way to take off the paint from the 830 ?
I tried some 60grit sand paper and no luck
is there a simple way of adding a module, like these:
http://img690.imageshack.us/img690/7619/intro1.th.jpg
to turn all those HD slots for a Stacker 830 to a swappable HDs like those in a Corsair Obsidian Series 800D
http://img693.imageshack.us/img693/4...allery4.th.jpg
-four-drive SATA hot-swap drive bay sits in the front of the case
advance thanks
There are many hot swap 5,25">3,5" bays out thereQuote:
Originally Posted by Cpl Ledanek
varying from 1 and up to 6 disk configurations
some include a fan some others don't
it's all down to looks and budget imho...
(and some other features like on board raid controller and such)
newegg has some nice prices
check the links
i've bought the LianLi 4 disk hot swap model
but i only see the small one as available right now (3 disks)
link
so this particular model fits inside the Stacker 830SE without modding?Quote:
Originally Posted by SlackerXL
it mentions that I have to get a RAID card to enable hot-swap, which model do you use?
advance thanks
I wish I still had pics of my Stacker when I used it as a server. I think I accidentally deleted all the pictures. :down:Quote:
Originally Posted by Cpl Ledanek
I have 3 of these in use
http://kingwin.com/products/cate/mob...kf_4000_bk.asp
And you don't need a raid card. You just plug the sata cable in to the back of the cage.
Do you have : Sketch up Coolermaster Case (Original) or DetailQuote:
Originally Posted by SlackerXL
'Because now i using my case and i need adjust database but i didnt have any detail then send file to me please
Thank you . . . AGAIN . . .
Quote:
Originally Posted by Cpl Ledanek
yeap it fits with no problemQuote:
Originally Posted by lowfat
unless you're planning to place it in front of a card like 5970
in that case i suppose its gonna get tough pluging in those sata cables
so close to the card
apart from that i don't think it has any other problems,
(some might not like the perforated aluminum faceplate,
but thats totally up to you to decide.)
i used it to swap non raid storage disks that where plugged in the secondary sata controller of my board
so its kinda like using esata
no need for a raid card.
we also used to build some limited production BTO systems
based on 833 stackers and utilizing a hot swap cage like the kingwin model
lowfat suggests, also with no problems at all
except maybe for the kinda noisy stock 80mm fan
that came with the cage.
Waiting for a dream come true.^^
Y_Y waiting for Detail 830 Y_Y
very nice set up!.. :up:Quote:
Originally Posted by Ogge_swe
thanks :D, but i did just used my stacker temporary, i modding my 800D ATM :PQuote:
Originally Posted by mel12yan
wow! I'll wait for that dude! 800d is a HUGE and NICE case!..Quote:
Originally Posted by Ogge_swe
here's mine:
http://i6.photobucket.com/albums/y21...g/_MG_1740.jpg
http://i6.photobucket.com/albums/y21...g/_MG_1741.jpg
i'll also update new photos and new modifications here..! :D
Nice! ^^
a little update to my stacker :)
[IMG]http://img808.imageshack.us/img808/2...0101616.th.jpg[/IMG]
nice set up dude!
thanks :) i love the fire red color :up:Quote:
Originally Posted by mel12yan
do anyone have a link to 83x stacker with radiator at front bay?
First let me say this picture is not mine. This shot belongs to " jbl2226h " when I saw this picture I was sold on getting a CM Stacker 831 SE
It Just Blew Me Away..let us know what you think ? :clap:
I call this picture..A Work in Progress .
http://img834.imageshack.us/img834/5549/dsc0478ut.jpg
looks intersting
and where is cd-rom?
As far as I know and I've looked at this build process about 100 times..he did a good paint job on the cd/dvd case..(black)..but never installed the drive ?
I would leave it like it is,and use a usb drive only if I need to. my 2 cents :cool:
well it would be too simple if i could throw away a cd, i could put triple rad in front then)
I know water would make this build "Overclockable",I think he just wanted to personalize it and make it simple but elegant..I think it's great like it is.
I remember that one :yepp::)Quote:
Originally Posted by DuncanBishop
how these fans in front are mounted? i know one way is to use fans holders from back side panel, is it this?
No :) They are Stacker fan brackets, they are sold separately :)
http://www.ipcrepublic.com/images/pr...0fbn1_main.jpg
Yes, these are brackets that came on side fan panels, i have 4 of them.
The only thing I don't like much is this cut on right side on the photo, being installed on front bay this looked not so good.
You are right,never had that side fan panel :)
nice rig jbl2226h! well done..!
Thx :)
Stacker > 800D. 800D looks cheap in comparison IMO. I really wish I had a use for my Stacker still.Quote:
Originally Posted by Ogge_swe
it´s the space inside i want, 800D is much larger insideQuote:
Originally Posted by lowfat
Does anyone know where I can buy COOLER MASTER Stacker 830 Evolution SC-830K-KKN3-GP Black Aluminum (K for black interiors) within EU? Or maybe some Stacker 83x that has been powder coated (can be a different colour, as long as it is black / red inside) by someone... If you see someone or some shop selling one, PM me, please! :)
The company i used to workQuote:
Originally Posted by zalbard
still was the RC833 on their website
Last time i checked (June) there was a rather limited stock
I can check again on Monday to see if its still available
if you're willing to go for the 833
http://i7.photobucket.com/albums/y27...er833panel.jpg
http://i7.photobucket.com/albums/y27...r833window.jpg
http://i7.photobucket.com/albums/y27...33interior.jpg
833 is fine. I will ask them, thanks! :up:
Although the coolermaster could launch a new version of Stacker, I'm sick of seeing Hafs, cosmos, and anything 690S a new Stacker 8xx the case for me is more beautiful than the coolermaster already sold!
how do you still manage to buy them, aren't 830's out of production couple of years already?
they maybe out of productionQuote:
Originally Posted by rioja
but some stores still have some quantities of them in stock.
Especially in the store i used to work,
we had to bring the price down to 119euros to get rid of the last 85 pieces.
Last time i checked, only a few were spared
so i don't know if there are actually any of these in stock right now
I will check and get back to you zalbard
That's most kind of you! :)Quote:
Originally Posted by SlackerXL
there is one last piece available
but the gross weight of the packaged case is aprox 18kgs
so the Greek Postal Services
registered post fee for Germany will be ~ 80€
a few more additions to this thread...
Stacker maybe be discontinued (until further notice)
but the case is not forgotten!
Here are some of my recent Stacker Builds.
A sports themed 833 (Olympiakos Footbal Club)
https://lh6.googleusercontent.com/-B...os-Black-A.jpg
https://lh6.googleusercontent.com/-n...os-Black-B.jpg
a plain black and white 830...
https://lh5.googleusercontent.com/-R...-830-White.jpg
A repsol racing 830
https://lh6.googleusercontent.com/-p...0-repsol-a.jpg
https://lh3.googleusercontent.com/-S...0-repsol-b.jpg
and a Yamaha racing 830 as well
https://lh5.googleusercontent.com/-X...2520Racing.jpg
https://lh5.googleusercontent.com/-8...ing-button.jpg
Fillmore Stacker 832 from the animation movie "Cars"
https://lh3.googleusercontent.com/-d...ker%2520vw.jpg
TheLab.gr 2011 Christmas Contest Award case
https://lh5.googleusercontent.com/-7...3-thelab-a.jpg
https://lh4.googleusercontent.com/-Z...3-thelab-b.jpg
and an extended version of a stacker 833 with some extra height for bottom placement of thicker rads
https://lh6.googleusercontent.com/-T...p%2520view.jpg
https://lh6.googleusercontent.com/-8...d-sideopen.jpg
...let's just hope that after bringing the Cosmos back to life
Coolermaster is working on a successor for the Stacker series as well....
You my friend are the king of stackers...
Hmm was thinking about retiring my 831 and moving to a Silverstone FT02. After looking at this thread, I'm not so sure now hahaha...
Any plans to start modding any other cases?
Amazing cases! :up: I didn't know this thread existed. I'm currently working on my first water cooling build in a CM Stacker 830. These mods have given me some inspiration for my build! I'll post some pictures soon of my current work in progress. Nice to see so much variety in these cases, and all very nice builds too!
another contribution to the collection
http://i288.photobucket.com/albums/l...partan/cs1.jpg
http://i288.photobucket.com/albums/l...partan/cs2.jpg
My dream was always to have a stacker still find one to buy
Attachment 124995Attachment 124996
My latest work on my 832.
I have a work log for the paint and such too. Quite a few mods to my case that these pics don't show.
Glad to see more people still building their rigs in this case
I'm modding whatever comes my way...Quote:
Originally Posted by nksharp
but once you've modded a few dozen cases of a certain type (like the 83x series)
a special kind of love and hate relationship comes up
So whenever one of these finds its way to my workshop, i just can't resist.
(to many unfulfilled ideas and plans still lurking at the back of my head)
@Maxforces.
Nice one :up:
How much did that CSX set you back?
@FloofyFox
Nice and clean one!
What have you used to attach the sidepanel that way?
i see no screw sockets nor glue, tape etc.
Looks good
I 'd be glad to provide you with oneQuote:
Originally Posted by LeandroJVarini
but unfortunately the distance is a big issue
Shipping from Greece to Brazil would cost almost as the case itself
Got a silver 830 today. All I wanted it for was the stock interior. I didn't do a good enough job on the 832 interior so I needed a fresh start.
http://i18.photobucket.com/albums/b1...r/Stackers.jpg
know what you mean lowfat!
i can already smell those aluminum cuts...
Is this one new btw?
No it is used and rather dirty. But the interior has not been modified and in generally good shape.Quote:
Originally Posted by SlackerXL
Bonus pics of my first Stacker back in 2007.
http://i18.photobucket.com/albums/b1...0042Medium.jpg
http://i18.photobucket.com/albums/b1...oldstacker.jpg