thats $60 per chip thoQuote:
Originally Posted by Bootup05
Printable View
thats $60 per chip thoQuote:
Originally Posted by Bootup05
Good question, Sammy does throw a fit every time it boots, but works fine. :shrug:Quote:
Originally Posted by Bootup05
What about those boards? Is the clock generator supported?
Back from work..
Sorry guys, I gave them my cellphone number and they promised to get back to me with pricing and availability information, but it seems they had something better to do.
If the price s0lid got is from the same site, we can forget it anyways. They probably won't let them go below 100€ or so. Dang...
So it's 60 USD for the CPUs each.. I think I'm gonna pass :/
I got X5450 incoming, they'll do around 36-38k/d which equals around 4-5 Sammy's (which I wanted), but the Harpers use less power (300 vs. 500W guesstimation). Plus I need to raise 300€ w/o taxes for a 2nd Z7S... yes, they have actually gotten more expensive, argh! My 1st one cost me like 278€ net.
Man.
Are you kidding me?
Sammy's are hot, rare, and you need one just for the hell of it.
Shiet even i got one.
One? Bah.. I wanted 5 in a server rack :D
But that won't work with the CPUs at 60$ each :/
One just isn't Xtreme enough for me :D
Plus it's not worth the shipping hassle...
how exactly does the pinmod work, i've never done it before, i really don't get how it works, oh, and on topic, my board should be here friday :D
For the Sossaman, which goes into PGA sockets, you simply wire those two pins or use a conductive tape. In the end, you simply need to connect those two pins.Quote:
Originally Posted by just a noob
For recent Intel CPUs, which goes into LGA sockets, you use conductive ink to connect two points.
Well jaco u interested to order that mobo and coolers set via movieman and split up shpping costs from US to europe?Quote:
Originally Posted by [XC] Jaco
ROFL last time u gambled on that, you lost your chance at probably one of the best quadcores of all time. :rofl:Quote:
Originally Posted by jcool
However i have to agree with you on that comment this time arround. :up:
you guys talking about the mobo shipping?
If you look at my thread on shipping you'll see how fast it was. US to EU UK. No problems :up:
Ye, it usually takes about 5days to get stuff from Usa to Finland.Quote:
Originally Posted by Bootup05
But how many on this forum is gonna take mobos and how many hs gonna take those coolers?
s0lid,
Let's wait until jcool gets an answer from that German shop.
im interested in sharing shipping expenses for the heatsinks
Which wouldn't go past 4Ghz anyways on my DFI cause it does for the hell of it not want to go above FSB 460 with a Quad - no thank you :shakes:Quote:
Originally Posted by NaeKuh
Jaco, I don't think they're gonna respond or they would have done so yesterday :rolleyes:
Plus if they tell s0lid the CPUs cost like 170€ they won't give it to me for 10...
What about the shop in the first link ?
Sold out at the moment, I guess :D , but maybe they can get more cpu's ?
So the 40€/slice is cheapest price for those sossamans atm... Even tho they have 300 of em :DDQuote:
Originally Posted by jcool
Jcool u should ask better price from that place if might take over 20pcs of em.
No, they probably won't. They said they'd call me if they got any more, but they aren't planning on stocking up. That was just a small leftover position I'm afraid...Quote:
Originally Posted by [XC] Jaco
So, for what I know, we need this so far:
Jaco: motherboard
S0lid: motherboard
Bootup: 2 sinks
Me: motherboard + 2 sinks
I think than the list looks like this :PQuote:
Originally Posted by Martijn
Jaco: motherboard + 2 sinks + Backplates
S0lid: motherboard + 2 sinks + Backplates
Bootup: 2 sinks
Martjn: motherboard + 2 sinks
Make that 2 Backplates for me as well. I suppose they aren't sold with the board then?Quote:
Originally Posted by s0lid
Well nope.Quote:
Originally Posted by Martijn
Ask from Dave an good offer for mobos, sinks and so on =)
I go to bed, good night all...
Do we know if Dave is willing to ship all of this crap to Europe?Quote:
Originally Posted by s0lid
Also, I think it would be best if we would all pay him the amount we owe him + 1/4 of the shipping costs instead of all at once, since we all need different parts. That makes it a little more easier I think. Shipping the rest within Europe could be arranged later. We will need a quote on the individual parts, the shipment within the US and the shipping to the EU so that we know how much to pay.
I already sent Movieman PM about this.Quote:
Originally Posted by Martijn
Uhm 3 guys taking the same package and one takes only heatsinks, yeaaa different parts =P
BTW the mobo + heatsinks + backplate package costs around $45 => 32€ w/o shippings :D
Not bad tho...
Im not sure if I'd need any backplates or not.
The board has backplates on already, well what look like backplates anyway, metal plates behind the cpu socket area, these are detachable.
Dave should be able to tell us what it is these are.
The back plate which that mobo has is wrong type...Quote:
Originally Posted by Bootup05
I'll show u:
Right type of backplate:
http://www.xtremesystems.org/Forums/...1&d=1209693676
Wrong type of backplate (comes with mobo)
http://www.xtremesystems.org/Forums/...1&d=1207901046
There is simple explanation: those oringinal backplates are ment for case which has already lga604 or lga771 coolers on them.
But yea those backplates costs around $3-5 so not really big deal...
Ah ok thanks for explaining :)
I'll be needing some backplates then :up:
I've been thinking: should i take 2 mobos and 4heatsinks and backplates at once since they're so darn cheap...
Btw anybody wouldn't have cheap Eatx 1U 19" cases left over :D?
Go for it! :yepp:
You should pick up one of them cheap $50, and have a go at modding an ATX, gives you a little project to do :up:
Yea i know i should take mobo and sinks for second build but i'm not sure how much money i get within this week...Quote:
Originally Posted by Bootup05
That is sure than i have enought for one build but for second dunno?
Oh what the hell. I don't have CPUs, but I might find some sooner or later. Sign me up for one mobo, two heatsinks + backplate.
I knew it! :DQuote:
Originally Posted by jcool
Man i've been spamming this thread, 41posts by me...
Don't worry, you entitled to spam it, its your thread :p:
s0lid ,
Is that a supermicro backplate (SKT-059) ?
I am expecting 2 of those shortly :D
I think they're :)Quote:
Originally Posted by [XC] Jaco
Are those the same backplates you ordered through PM with me? If they are, it might be cheaper (in terms of weight) to have those shipped to me at once locally...Quote:
Originally Posted by [XC] Jaco
no these are different. 2€ /piece and 15€ shipping costs :am:Quote:
Originally Posted by Martijn
The backplates I got with your help were these:
http://www.pcsilent.nl/nl/CPU_Koeler...oards.818.html
I am in need of a bit of hardware here :yepp:
http://img228.imageshack.us/img228/6...0916ri5.th.jpg
Sorry for the crappy pic, but I had to take it fast... Gotta go now. Enjoy! :D
Those on right are my chips right ;)?Quote:
Originally Posted by Martijn
Good than u got em in one piece over there :up:
Yes they are. I am keeping the ones on the right tightly packed :up:Quote:
Originally Posted by s0lid
Any updates yet?
About getting mobos and heatsinks?
I'll send u an pm :)
I just ordered 4 motherboards for you sorry assed people..:rofl:
For Jaco, Martijn, Jcool and me?Quote:
Originally Posted by Movieman
Good :)
And Dave, you're sponsoring mine too? :p:
Ahh, you got two chances..Slim and none..And forget slim!:rofl:Quote:
Originally Posted by Bobsama
Right now I couldn't sponsor a tiddlywink contest between two midgets if it took place in my living room.
Blew a lot of money lately, more than I had to play with.
Ok, you guys will need to come up with app $80.00 for the 4 pairs of heatsinks and $2.95 each and shipping for the xeon backplates that I will order from Performance PC's.. The ones Jaco showed should work fine also.
Just let me know whats planned and by PM in addition to this thread in case I miss it..
Oh, boards were shipped today, should arrive to me next friday.
So there's no chance you won't sponsor me? That's good! I'd be happy to save you a few bucks on electricity. I have 'net and 'power for plenty of machines. I can do 4 more system right now easy, more with wireless cards. ;)Quote:
Originally Posted by Movieman
I'd be doing you a favor, Dave! :yepp: :ROTF: And Dave, once I get my textbooks I can look over what's left that I can spend. Maybe I would be able to buy your Q6600 or something and replace my E2140.
You mean my Q6600 thats does 3600 on air at 50C, that runs the last 6 months 24/7 loaded with no issues, the Q6600 that I benched at 4005mhz?Quote:
Originally Posted by Bobsama
THAT Q6600?
Maybe..:rofl:
Sounds like a good Q6600 to me! We could do a swap for my E2140... you love dualies! :rofl::rofl::rofl: The Q6600'd go under an Infinity. I'm not sure about my IP35-E though... :DQuote:
Originally Posted by Movieman
Anyone want to sell me 2 sammy? :)
Take a ticket and get in line!:rofl:Quote:
Originally Posted by Bail_w
Anyone wnat to give me a Sammy?Quote:
Originally Posted by Movieman
There is a line forming for that right over here....Quote:
Originally Posted by Bobsama
Oh goody! I'm on the VIP list! :D
FINE! i see where this is going.Quote:
Originally Posted by Movieman
Don't feel bad, I'm not getting any either..Quote:
Originally Posted by Bail_w
Story of my life... :ROTF:Quote:
Originally Posted by Movieman
Story of my life thusfar.
lol i was messing around. anyway, they only have total of 8 in stocks?Quote:
Originally Posted by Movieman
Eh Dave, 5pairs o Heatsinks :)Quote:
Originally Posted by Movieman
Bootup5 takes also heatsinks, but no mobo...
Ach lets make the list here:
s0lid: mobo, HS, backplate
Jcool: mobo, HS, backplate
Jaco: mobo, HS, backplate
Martijn: mobo, HS, backplate
Bootup5: HS
:)
There was total of 6cpus of 11€ Xeons :)Quote:
Originally Posted by Bail_w
U can get 1.667GHz models for $60/piece, Those should be over 300pcs...
The link is on some page of this thread, happy searching :ROTF:
Dave, I sent my part of the deal for the backplates and shipping costs. $60 should cover the total, right?
So no one have pin-mod these suckers successfully yet?
266FSB mod works, but not suitable for 2.0GHz model due 12x multiplier.Quote:
Originally Posted by Bail_w
Might work better with 1.667GHz model
Not to my knowledgeQuote:
Originally Posted by Bail_w
Hi, How do you know this 266FSB mod works?Quote:
Originally Posted by s0lid
I don't think it will as from all I've read( and trust me here, I did a LOT of research on these) the highest FSB ever gotten with the Yonah was 245 on that Aopen 975 board..App 2940mhz they got to.
I think your going to have to be happy with the 200FSB pin mod IF it will work.
It didn't for me but hey, I'm an old blind man so maybe I missed something.:D
Taking these chips from 2000(1995 in reality) so from 2000/2mb/667 to 2400/2mb/800 is a decent jump.
At that speed they should do just over 10,000 a day in WCG as they perfectly work out to 1.1 point per day per total mhz.
To put that in perspective, when the Q6600 B3 kentsfields came out they worked out to 1.09 permhz per day so these are pretty impressive little chips.
With a working pin mod to 2400 thats 9600 total mhz and that times 1.1 equals 10,560 points a day claimed. Not bad huh?:up:
Oh, ok then :PQuote:
Originally Posted by Movieman
Let's update som:
The mobos are at Moviemans place at friday, how about heatsinks and backplates?
Maybe I should order the backplates here in the Netherlands, if they were the ones that Jaco showed us?
EDIT: they aren't, NVM.
I ordered 2 backplates as jaco has 2 already and making a trip this week to get 8 heatsinks.Quote:
Originally Posted by s0lid
Not sure what day on that yet so by friday I should have 4 boards,2 backplates and 8 heatsinks.
Ok,Quote:
Originally Posted by Movieman
Let's hope they'll be there by end of this week :D :up:
Boards are scheduled to be delivered on Thursday, backplates were ordered today, usually 2 days from them to me.Quote:
Originally Posted by s0lid
heatsinks I do have to call them before going to pick up but I don't see an issue there. they had over 100 on hand when I was last there.
Btw what size of psu is this requires :D?
I've an 230W psu over here, with P4 connectors and all :P
Is that enought? should be...
Btw... It's my bday, yes i'm now 17 :fact:
Whoa... HAPPY BIRTHDAY s0lid!!! :D
:bday: s0lidQuote:
Originally Posted by s0lid
230w is enough for this system. (you'll need an 8-pin plug though!)
I'm going for a 400w 80+ efficient psu. Should be at 80% efficiency at 100w load.
I was just getting ready to make a thread for Frish so you get one also. Unhide your bday next time :P
Quote:
Originally Posted by loonym
Quote:
Originally Posted by [XC] mysticmerlin
Thx mates :)Quote:
Originally Posted by [XC] Jaco
Just checked: psu don't have an P4 connector...
But now i got good reason to remove one molex rail and replace it with 8pin ESP connector from this:
http://www.coolputer.fi/tuotekuvat/1199.jpg
Elfa had those connectors in stock early this year but can't find em from their website... Need to start reading the 5kg elfa 2008 catalog :ROTF:
Ya i tried to look for that option...Quote:
Originally Posted by [XC] mysticmerlin
E: found it...
Just get a 4-pin to 8-pin coverter like I did.Quote:
Originally Posted by [XC] Jaco
Hey, I figurfed how we get even with Martijn for being greedy with those chips..
We send him all but the heat sinks..:rofl:....:sofa:
Talked with OEMXS today. Going there tomorrow am and grabbing 10 HS
Dave, you do realize that I have FOUR chips right here? :p:Quote:
Originally Posted by Movieman
You DO realize that instead of selling them to S0lid, I could sell them locally for triple the prize instead? ;)
You DO realize that I could have my own sinks shipped to me then? :rofl:
Oh and those Sammies won't need heatsinks LOL!
Did you miss my entire coment at the start of this post?Quote:
Originally Posted by Martijn
Rule 1: Dave is always correct
Rule 2: No you are not correct
Rule 3: I thought i was like you, Smarter then dave. But when you think your right, follow rule 1
Do i need to show this failed picture again?
http://i125.photobucket.com/albums/p...a/IMG_1079.jpg
:rofl:
LOL, didn't it work out?
Rule no. 4: never admit to Dave he was right after all :D
no, the HR-05 was a complete failure..Quote:
Originally Posted by Martijn
thats why i said follow rule 1 when you think your correct. :rofl:
As long as I won't need to call him :shocked:Quote:
Originally Posted by NaeKuh
well when your sitting there scratching your head going WTF how come its not working.Quote:
Originally Posted by Martijn
Thats your only option left. :rofl:
Thats why listen to dave from the getgo and you avoid the phonecall. :rofl:
Yupp.. those HR-05s crushed cpus right?
Rule#5;Quote:
Originally Posted by Martijn
I will need to speak with you personally to confirm shipping address.:rofl:
Thank goodness that's the job of Jaco and he already has my address :rofl:Quote:
Originally Posted by Movieman
Poor Jaco now movieman has call to him! :ROTF:Quote:
Originally Posted by Martijn
That ain't my problem :shrug:Quote:
Originally Posted by s0lid
:owned:
Hey be nice you !! They're reserved for s0lid .Quote:
Originally Posted by Martijn
It's s0lid's birthday today you know :up:
And I have your adress , Barendrecht is not that far :rofl:
Oh, you are going to bring the hardware to me? How nice! :rofl:Quote:
Originally Posted by [XC] Jaco
nah..Quote:
Originally Posted by s0lid
the surface area on the HR-05 is not large enough to keep both cores stable.
Happy Bday Solid.
No, he isn't and if your not nice, guess who Jaco gives your telephone number to?.....Meeeeeeeeeeeeeeeeee!:rofl:Quote:
Originally Posted by Martijn
Quote:
Originally Posted by Movieman
Did they work on the NB and SB??Quote:
Originally Posted by NaeKuh
:rofl::rofl:Quote:
Originally Posted by Movieman
Good thing than i haven't given my phone number to anyone on xs :p:
What? You think that Xs is my only source for tel numbers?Quote:
Originally Posted by s0lid
(Tweety bird voice)
"You don't know me very well do you?"
very well. I still have them on those. :up:Quote:
Originally Posted by Movieman
*67(dave's phone number) + SEND. ;) I've done that before.
Ahh, God bless FedEx!
Guess what just showed up a day early?
Four nice pretty Intel Sossaman boards.
Now I've just decided that since our good friend Mr.Martijn is known as Mr. Boardburner that I should only send three and keep his for extensive testing.
Say 2-3 months should do it!:rofl:
How good do they work on the NB and SB as I did notice those generating a lot of heat. Also how difficult was it to pull the factory NB and SB sinks?Quote:
Originally Posted by NaeKuh