X48 BlackOps Memory Compatibility list

Up up.. So no one knows if these sticks work?

OCZ Reaper HPC 4GB (2 x 2GB)
http://www.newegg.com/Product/Produc...82E16820227320

Patriot Viper II 4GB
http://www.newegg.com/Product/Produc...82E16820220407

Quote:

---

Originally Posted by Blizzie

Up up.. So no one knows if these sticks work?

OCZ Reaper HPC 4GB (2 x 2GB)
http://www.newegg.com/Product/Produc...82E16820227320

[/url]

---

I had model 1800MHz and it worked well even on 1940 MHz.

Quote:

---

Originally Posted by gregor1230

I had model 1800MHz and it worked well even on 1940 MHz.

---

Thanks a lot! :D

Out of curiosity, what sort of NB cooling are the ppl. who are getting 1600+ fsb using?
My NB temp is sitting on 43c @ 1333 fsb and default (1.25) voltage. I think the included fan is dicky, maybe I damaged it's wire/s when I sleeved them. Hope it's the fan and not the fan plug on MB, couldn't be arsed RTM the whole thing for 1 fan plug, would rather just get a "Y" connector and run it off one of the others, or even just use a molex powered fan. Will replace ASAP, hope it lowers temps.
Do larger diameter fans help on NB? Or is water cooling the minimum requirement for NB to run reasonably cool?

edit: pulled side off case and checked NB fan - again. It isn't working - at all - even on other fan connectors.
It was working last time I checked it. That explains my high NB temps I guess. :) At least with no fan on there NB temps are slightly cooler than with a non-functioning one.

I'm not sure if anyone has added the F3-1600CL9D-4GBGT1 2GBx2 kit [I saw a "TT" kit], but this set works great; currently running it at 8-8-8-21-2T @ 1900Mhz on 1.87v

OCZ Intel Extreme @ 1600MHz


XMP - Passed (well it boots... But who uses that crap)

Manual - 7-6-6-18 @ 2Volts T2 Passed memtest + prime8hours


One thing I have noticed is that setting T1 in the bios wont budge the cmd rate reported by CPUz and memset from T2 So i usually leave it on auto. :shrug:
Otherwise everything checks out

Update:

Kingston KHX13000D3LLK2/4G PC3-13000 DDR3 1625MHz will run at 1600MHz 8-8-8-22-1N as opposed to the 7-7-7-20-2N I posted earlier

Can someone tell me if the Corsair DOMINATOR GT 1600mhz works in the BlackOps? Thx!!!

Quote:

---

Originally Posted by Pekalion

Can someone tell me if the Corsair DOMINATOR GT 1600mhz works in the BlackOps? Thx!!!

---

i have a set of dominator 1600 TR3X3G1600C8D G
it works but i khan not boot whit the 1600 speed.

Patriot pdc34G1600ELK 2 x2gb kit working defaults not @1600mhz yet but im working on it :) ill report bk once im in the know

Hi all
Anyone tryed G-Skill ripjaw 2x2gb 1600Mhz?

hi I had the blackops and ripjaw 1600 from overclockers u.k
board would not post phoned o/c u.k they sead that memory was not
compatabile had to RMA board+ memory for testing.
It turned out that the board was bust so thay sent me a
new one but still sead that ripjaw was not compatabile
they sead patriot viper would be alright.
I got the new board back and the patriot viper 1600
all was well.
hopes this helps

Corsair CMG4Gx3M2A1600C7 works fine at stock speed (1600Mhz 7-7-7-20 1.65v) :)

mentiond this to saaya the other day

Quote:

---

Originally Posted by EvoCarlos

does this bios make the ram straps work ?

i wasited 17min's of my life trying to get the blackops to work with the p06 bios

1:1 = c1
1:2 = c1
1:2.4 = c1
1:2.665 = c1
1:3 = c1
1:3.2 = c1
1:4 200 = c1
1:4 266 = c1
1:4 333 = c1
1:4 400 = c1
auto = working but ram at 400mhz os speed

all straps apart from auto dont work and give C1 at post
auto works but the ram speed is far to slow at 400mhz

ive got it all on vid of every strap test with some harsh swear words in there also
will put it up on the tube once edited

edit:
cpu is a e4300(SL9TB) @4ghz
ram is patriot vipers d9gtr @ 2.1v 7-6-5-15 (as tested and working up to 900+mhz on the x48 asus rampage extreme)

---

Quote:

---

Originally Posted by saaya

sounds like a bad spd or the spd doesnt work well with BO...
try to flash them to an spd that is known to work on BO, check the compatibility list in the tweaks n guides section :)

---

so
Patriot ---------- 1600 - 777 - 1600LLK
Patriot --------- 1800 - 888 - 1800LLK
Patriot Viper --- 1800 - 888 - PVS32G1800LLK[/COLOR]
Patriot Viper --- 1866 - 888 - may require an SPD or BIOS (G28 or later) update to boot


mine are the ones in red btw lol

had to do mod the spd lol all i did was add a xmp profile and now they work fine apart from 1:3 400
http://i556.photobucket.com/albums/s...os1/spd111.jpg

very little diffrences

na the black ops still sucks with ram straps 3 diffrent sets there all sh1te
kingston hyperx khx2000cl8 elpidma (non exsplsive ones) -post error 54 with 1:4 400 works on auto g28/p06/g42 bios tryed
crutial 2000 9-9-9-24 d9gtr -pst error 54 most of the time
patriot vipers d9gts (fail fail fail) going to flash the spd with a corsair spd Corsair CM3X1024-1800C7DHX
ive tested Corsair CM3X1024-1800C7DIN and work as they should but i cant find the spd for the c7din ram

I'm currently running Mushkin's 998750, 2 out of the 3 sticks @ 1442Mhz 6-6-6-18-1T 1.65v.

Ordered a couple of sets of HyperX 2250 CL9; getting here next Monday, will try then.

Quote:

---

Originally Posted by Telo

I'm currently running Mushkin's 998750, 2 out of the 3 sticks @ 1442Mhz 6-6-6-18-1T 1.65v.

Ordered a couple of sets of HyperX 2250 CL9; getting here next Monday, will try then.

---

No go on the Hyperx 2250, AO code with steady beeping.:down:

has any1 tried with the new corsair vengeance? or will any 2x4 GB module work on blackops?

it turns out that blackops can register a 4 GB module, i'm using 2x4GB Patriot Division 2 Viper Extreme 1600 MHz @ 8-9-8-24 with the latest bios and it worked fine