CSX DDR3 arrived: Diablo 2000MHz & CEC 1333MHz kits first look

Printable View

Show 100 post(s) from this thread on one page

07-28-2008, 01:33 AM
Kasparz

Quote:

Originally Posted by slim142

I wish you had one so you could show us some bandwidth scores with P1 & P2 Enabled.

4GHz wolfdale with D9GTR 1:2 P1/P2 enabled gets you about 12.9k-13.3k in last everest version.
07-28-2008, 01:47 AM
shinchan03

there are OCZ PC3-16000 Flex II XLC coming to me, r00ns ramlist can tell me that are Samsung HCF0 chips. But i haven't seen any results yet.
07-28-2008, 02:59 PM
slim142

Quote:

Originally Posted by Kasparz

4GHz wolfdale with D9GTR 1:2 P1/P2 enabled gets you about 12.9k-13.3k in last everest version.

:eek::eek::eek::eek::eek:

CSX Diablo FTW :clap:

Some numbers with a Quad-Core would be really appreciated too! :D
07-29-2008, 01:23 AM
Kasparz

Quote:

Originally Posted by shinchan03

there are OCZ PC3-16000 Flex II XLC coming to me, r00ns ramlist can tell me that are Samsung HCF0 chips. But i haven't seen any results yet.

HCF0? Huh?
Samsungs in CSX are K4B1G0846D-HCH9
There's the full list of Samsung production DDR3 IC's
http://www.samsung.com/global/busine...d=103&sht_id=1
07-29-2008, 01:32 AM
shinchan03

Hmm strange, r00ns ramlist is giving me the wrong information?

http://ramlist.infinityx.nl/ddr3/

Look at the OCZ FlexxII 2000MHz's sticks.
I was talking about OCZ memory did you notice that? I want to know what kind of IC's they have.
07-29-2008, 07:47 AM
MnM

Is a pitty that all the shops listed here are EU shipping shops only.

Anyone knows of a shop that stocks this ram and has international shipping?
07-29-2008, 08:43 AM
jugeen

Quote:

Originally Posted by Kasparz

HCF0? Huh?
Samsungs in CSX are K4B1G0846D-HCH9
There's the full list of Samsung production DDR3 IC's
http://www.samsung.com/global/busine...d=103&sht_id=1

you can also have a look at HCF0 here
07-29-2008, 10:00 AM
Kasparz

Yes, i saw these, but they're not at Samsungs list. But price for OCZ/Corsair or A-Data Samsung HCF0 still is a lot higher that tends to think chips are more expensive too. And HCH9 isn't capable of 2GHz 8-8-8.
07-30-2008, 05:22 AM
rabor

Quote:

Originally Posted by shinchan03

Hmm strange, r00ns ramlist is giving me the wrong information?

http://ramlist.infinityx.nl/ddr3/

Look at the OCZ FlexxII 2000MHz's sticks.
I was talking about OCZ memory did you notice that? I want to know what kind of IC's they have.

Hope you're not using a Striker II Extreme.. I received my 2nd set of (790iUltra-pretested) OCZ Flex II DDR2000's yesterday & they crapped out aswell.

So I've given up & ordered these babies too..
07-30-2008, 05:29 AM
shinchan03

How did they run at the striker II Extreme? I'm going to run on a Asus P5Q3 Deluxe, so i don't hope thats also going to be a big disaster. If the OCZ memory crap out as you say i sell them and i'm going to look for something else. Maybe the CSX.

The CSX memory isn't for sale in the Netherlands is it?
07-30-2008, 05:44 AM
rabor

I ordered a 2GB kit this morning at com-discount.de for € 117,- (+ € 20,- shipping via DHL-Premium).

The OCZ Flex II 2000's won't even run Memtest68 error-free at DDR1600 9-9-9-3X - on a Striker2Extreme that is with a stock E8500.. However the first kit worked fine before on a P5E3 Premium @ DDR2000+ but that board's a goner now, so I can't test if my OCZ's are actually faulty, or just being rejected by my S2E..
07-30-2008, 05:48 AM
shinchan03

Hmm i'm going to try it and i will see if it works, I'm also going to think about the CSX's, thanks four your info
07-30-2008, 06:02 AM
SmokeyTheBandit

Quote:

Originally Posted by shinchan03

Hmm i'm going to try it and i will see if it works, I'm also going to think about the CSX's, thanks four your info

I bought them at ww.hpm-computer.de and they ship to NL for +/- €9,- with GLS :cool:
07-30-2008, 06:13 AM
shinchan03

I checked the site but the 2gb version is more expensive then at comdiscount, I will check both of the sites at that time. First i'm going to try the ocz memory
07-30-2008, 06:13 AM
rabor

Quote:

Originally Posted by SmokeyTheBandit

I bought them at ww.hpm-computer.de and they ship to NL for +/- €9,- with GLS :cool:

Hmm.. € 139,90 + 9,- GLS - No Stock, or € 117,- + 20,41 DHL-Premium (< 36 hours) - Stock.. :slap:

;)
07-30-2008, 09:06 AM
slim142

Quote:

Originally Posted by rabor

I ordered a 2GB kit this morning at com-discount.de for € 117,- (+ € 20,- shipping via DHL-Premium).

The OCZ Flex II 2000's won't even run Memtest68 error-free at DDR1600 9-9-9-3X - on a Striker2Extreme that is with a stock E8500.. However the first kit worked fine before on a P5E3 Premium @ DDR2000+ but that board's a goner now, so I can't test if my OCZ's are actually faulty, or just being rejected by my S2E..

Could you please post some Everest memory benchmarks and overclock results once you get this memory?
07-30-2008, 09:14 AM
Kasparz

Quote:

Originally Posted by rabor

Hope you're not using a Striker II Extreme.. I received my 2nd set of (790iUltra-pretested) OCZ Flex II DDR2000's yesterday & they crapped out aswell.

So I've given up & ordered these babies too..

Not to blame anyone, but OCZ recommends 2GHz kits with nF790i, and that's pretty normal. But if it can't work with best board in market, that isn't sign of quality. And if memory costs that much for 2GHz kit, it should be working proper. Same goes for other OCZ kits, as i'm working in big company as a service head, large numbers of OCZ memory have compatibility issues. They have excellent R&D people, so they should improve their products.
If anyone will do trip to Latvia, i can make discount for CSX kits from our shop. :D
08-01-2008, 03:46 AM
M@G!C

I received my CSX DIABLO 4GB kit today... :clap::clap::clap:
I will start testing with my QX9650 and S2E when i get home.
08-03-2008, 08:20 AM
Kasparz

Finally ended testing for Samsung kits. They'll be rated at 1600MHz 7-8-8 1T 1.85Vdimm with XMP of course. I'll test later at lower speeds, and maybe include 1333MHz XMP profile too, because there are still few boards that won't work at 1600MHz stable.
08-03-2008, 10:22 AM
Achill3uS

interesting results, 1600 cas7 1.85v is nice but what about high clocks at cas8-9, don't you checked it?
08-03-2008, 10:52 AM
Kasparz

Id does 32M stable at 2GHz 8-8-8, but the reason is that at memtest it throws few errors at that speed, in windows its completely stable through dual 32M.
At 1333MHz it will be rated at 6-6-7 1.75v.
08-03-2008, 11:11 AM
Achill3uS

2000 cas8 32m hmmm sounds nice for the cec 1333 kits, i don't have much time to play with (but okay you are testing with 790i, not X48), but will get them back soon, and will check it asap :)
08-03-2008, 11:56 AM
Kasparz

CEC 1333MHz kits are Qimonda, Samsung will be 1600MHz. I have all chipsets available to test on, even X48.
08-03-2008, 12:02 PM
Achill3uS

so you told me i've found of cec 1333 a 2000mhz cl9 32M stable quimonda? :D
try to get one mate, its better for compare ddr3 than 790i or else...
08-03-2008, 12:23 PM
Kasparz

Retail 1333MHz kits will have Qimondas, retail 1600MHz kits will have Samsungs.
I don't need to try, because i have everything available on my desk.
08-03-2008, 12:35 PM
Achill3uS

ah i see. than maybe early 1333 cec comes with samsung coz ive seen some with it on a store here in hungary.
than use it, don't just see them, jk :D
08-03-2008, 12:53 PM
jugeen

share some photos Kasparz pls. i am really interesting CSX modules.
08-03-2008, 01:11 PM
Kasparz

Photos of memory or screenshots?
08-03-2008, 01:16 PM
jugeen

photos of memory. thx! :up:
08-04-2008, 05:57 AM
hecktic

add me to the list for USA buyers :)
08-04-2008, 06:42 AM
Felipe

nice results is a d9gtr?
08-04-2008, 07:44 AM
M@G!C

The 2x2GB kit that i have received have diferent SPD setings programmed in each module.... :confused: i dont think this is normal....
Can you help me on this Kasparz?

Thanks
08-04-2008, 08:00 AM
jcool

Magic how do they run on the S2E? I just had a nice chat with the EU sales rep from CSX, getting a 4GB kit Diablo 2000 myself for testing on a S2E.
08-04-2008, 08:19 AM
SmokeyTheBandit

Quote:

Originally Posted by M@G!C

The 2x2GB kit that i have received have diferent SPD setings programmed in each module.... :confused: i dont think this is normal....
Can you help me on this Kasparz?

Thanks

You could give the final spd Kasparz posted a go.
I programmed them and can confirm they work :)

http://www.xtremesystems.org/forums/...3&postcount=93
08-04-2008, 09:27 AM
Kasparz

Quote:

Originally Posted by jcool

Magic how do they run on the S2E? I just had a nice chat with the EU sales rep from CSX, getting a 4GB kit Diablo 2000 myself for testing on a S2E.

They run extremely well on S2XTR, as we speak, on this is board i achieved max stable speed with Diablo kits.
Different SPD's might be becasue at very first batch there was 2Ghz Diablo's without XMP, then they had. It might happen, but both modules are the same, and i have uploaded final spd if something.
08-04-2008, 09:32 AM
slim142

Oh man, I wish they had this available on US or at least shipping to US available. I WANT THIS SOOOOOOOOOOO BAD!
08-04-2008, 12:09 PM
M@G!C

Well i dont know why but this kit is not perfoming well with my S2E.
First i was unable to run them at 2000Mhz always BSOD when loading windows, and second i cannot run them at 8-7-6 timings even at 1800Mhz it will give errors on Memtest and BSOD if i try to load Windows.
Another thing i noticed is, i have run Memtest at 1800Mhz with timimgs 8-8-8-21 and 1.95V and it hangs! No errors it just hangs and i have to do a reset. I lowered the voltage to 1.90V and they pass memtest OK.
Any help is welcome at this point .... :(
08-04-2008, 01:41 PM
Kasparz

You have to increase chipset voltage for about 1.55-1.65v.
08-04-2008, 03:17 PM
M@G!C

Quote:

Originally Posted by Kasparz

You have to increase chipset voltage for about 1.55-1.65v.

I´ve increased the NB voltage to 1,6v since for now i´m only trying to run at 1800 8-7-6-15 and i stil get errors on Memtest ... :(
I also changed from the blue slots to the white slots and i had the same result..
I will not give up yet... :bsod: But really need your help... :rolleyes:
Thanks.
08-04-2008, 03:25 PM
M@G!C

Quote:

Originally Posted by jcool

Magic how do they run on the S2E? I just had a nice chat with the EU sales rep from CSX, getting a 4GB kit Diablo 2000 myself for testing on a S2E.

Right now i´m having some problems running this memory on my S2E as you can read from my posts. :( But i have :rolleyes: hope that i will sort the problem and have this memory working at 100%
I will have to do more tests.
08-04-2008, 10:43 PM
hecktic

maybe you can sell them to USA buyers here on XS only??

how about a special arrangement with one of the mods for XS in europe ... you could sell them to one person there who can be an agent for us here in USA... ofcourse that would mean all US buyers need to trust this person, but I think I have seen this done before on XS on other items....
08-04-2008, 10:53 PM
slim142

Quote:

Originally Posted by M@G!C

I´ve increased the NB voltage to 1,6v since for now i´m only trying to run at 1800 8-7-6-15 and i stil get errors on Memtest ... :(
I also changed from the blue slots to the white slots and i had the same result..
I will not give up yet... :bsod: But really need your help... :rolleyes:
Thanks.

M@G!C

I dont know if this affects all board, but mines sometimes will fail stability tests when the NB has too much voltage. However, you should keep in mind your NB should be between 1.54-1.60.

I would recommend you keep testing using Memtest86+ with a floppy. If it passes, run Prime95 and see if everything goes fine.
08-05-2008, 02:34 AM
M@G!C

The errors in Memtest i´m having are always in the same test:

TEST 6 moving inversions 32Bit random pattern
08-05-2008, 01:29 PM
LivingL@rGe81

Quote:

Originally Posted by M@G!C

The errors in Memtest i´m having are always in the same test:

TEST 6 moving inversions 32Bit random pattern

Try adjusting FSB voltage I get errors in test 6 when set to high with high clocks on memory!
08-06-2008, 01:41 AM
Kasparz

Quote:

Originally Posted by hecktic

maybe you can sell them to USA buyers here on XS only??

Is that a question for me? I can do it, but under different brand.
08-06-2008, 02:38 AM
hecktic

Quote:

Originally Posted by Kasparz

Is that a question for me? I can do it, but under different brand.

yes.... you could also sell them to us here in USA via a purchasing agent in Europe (preferably a very trusted XS member) who can then redistribute them to USA buyers.

Ive dealt with some awsome guys in the past with successful trades and sales to some European XS members.... maybe someone would be interested in doing this?

otherwise, how else can USA XS members get a hold of this ram?
08-06-2008, 02:52 AM
M@G!C

Maybe if a European XS member with a good positive feedback on Ebay, can sell them there...
08-06-2008, 03:23 AM
jcool

Quote:

Originally Posted by M@G!C

Maybe if a European XS member with a good positive feedback on Ebay, can sell them there...

Hi Magic, just received mine today, testing on S2E right now. Had problems at first, but now I got it to work using less Vdimm and less vnb.
Mem at 2000 8-7-6-19 2T, vNB 1,54V (~1,58V real, over 1,6 real gave errors) Vdimm 1,94V (1,97V real, around 1,95V is what the CSX rep told me, I had used 2,0V bios before which was too high?)
Apparently my set uses new chips, D9GTS instead of GTR, seems like they don't need/want as much voltage.
Check what yours say, if it's GTS try my suggestions.

Oh yeah, use the white slots.

Edit: Ok, didn't work that well. 1,9V bios suddenly failed at test 3, 1,94V too. Grml back to trying...
08-06-2008, 03:45 AM
Achill3uS

is that 2x2GB kit jcool? and its on the sticker "GTS" or just the CSX guy told you it is. sounds weird to me, that GTS don't like 2.0v or more... my GTS kit (not CSX) is memtest stable with even 2.2v... okay it could be, but its JNx ic's speciality...
08-06-2008, 03:48 AM
Kasparz

4gb - Gts
2gb - Gtr

The question is, XS guys wants kits with expensive heatspreader including heatpipes, standard low profile heatspreader, or memory without heatspreader?
08-06-2008, 03:52 AM
M@G!C

Quote:

Originally Posted by jcool

Hi Magic, just received mine today, testing on S2E right now. Had problems at first, but now I got it to work using less Vdimm and less vnb.
Mem at 2000 8-7-6-19 2T, vNB 1,54V (~1,58V real, over 1,6 real gave errors) Vdimm 1,94V (1,97V real, around 1,95V is what the CSX rep told me, I had used 2,0V bios before which was too high?)
Apparently my set uses new chips, D9GTS instead of GTR, seems like they don't need/want as much voltage.
Check what yours say, if it's GTS try my suggestions.

Oh yeah, use the white slots.

Edit: Ok, didn't work that well. 1,9V bios suddenly failed at test 3, 1,94V too. Grml back to trying...

My kit as GTR chips, and i´m currently testing in white slots...
I´ve tried a combination of different voltages in NB and Vdimm but till now i was not sucessfull running my kit at 2000Mhz or 1800Mhz 8-7-6-15 .... :(
All my test are donne LINKED and SINKED. And dont even try to run them at 1T.... :mad: It gives errors right away in the first test...
08-06-2008, 03:54 AM
Achill3uS

Quote:

Originally Posted by Kasparz

4gb - Gts
2gb - Gtr

The question is, XS guys wants kits with expensive heatspreader including heatpipes, standard low profile heatspreader, or memory without heatspreader?

thanks for clearing as far as i know 2x2 is also GTR. than retail is not, or just not anymore. than some double sided modules don't like that higher voltages even it's GTS.

btw what do you think about the heatspreader question? to sale memorys without (like TG before)?
my opinion is a strong hs wich don't need to replaced or extra cooled (except when you pushing them over the limits)
08-06-2008, 04:00 AM
M@G!C

Quote:

Originally Posted by Kasparz

4gb - Gts
2gb - Gtr

The question is, XS guys wants kits with expensive heatspreader including heatpipes, standard low profile heatspreader, or memory without heatspreader?

My kit it´s 4GB and it´s GTR.....
08-06-2008, 04:38 AM
Kasparz

Yes, old stock in shops are, but i'm talking about what comes out of csx at the moment, not shops.
Big heatspreader with heatpipes would;d be 40-50$ more than without heatspreaders, thats why i'm asking.
08-06-2008, 04:54 AM
M@G!C

Well i will do some more tests, if i continue to receive errors on Memtest at rated speed and timmings for this memory i will hane no other choice then return this kit... :(
08-06-2008, 05:03 AM
jcool

Quote:

Originally Posted by M@G!C

My kit as GTR chips, and i´m currently testing in white slots...
I´ve tried a combination of different voltages in NB and Vdimm but till now i was not sucessfull running my kit at 2000Mhz or 1800Mhz 8-7-6-15 .... :(
All my test are donne LINKED and SINKED. And dont even try to run them at 1T.... :mad: It gives errors right away in the first test...

Lol you won't believe what did the trick for me.. I got memtest interrupt error or something at 1800, so I lowered the vNB to 1,48V bios.. and memtest passed without a hiccup at 1800 8-7-6-19 with 1,9V Vdimm.
Priming now...
08-06-2008, 05:18 AM
M@G!C

Quote:

Originally Posted by jcool

Lol you won't believe what did the trick for me.. I got memtest interrupt error or something at 1800, so I lowered the vNB to 1,48V bios.. and memtest passed without a hiccup at 1800 8-7-6-19 with 1,9V Vdimm.
Priming now...

1,48 NB and 1,9V Vdimm are real voltage values or the values set on BIOS?
08-06-2008, 05:39 AM
jcool

Values set in bios.
08-06-2008, 06:29 AM
M@G!C

OK thanks :up:
I will give a try later and see if i have any luck.... :rolleyes:
Which BIOS do you have?
08-06-2008, 07:48 AM
jcool

0901 currently.
08-06-2008, 10:00 AM
rabor

Well, received mine today (2x 1GB - D9GTR),

& after some fiddling I got them Memtest-'stable' (4 passes) @ stock DDR2000 8-7-6-19-T1:

http://img396.imageshack.us/img396/1...dr32000hh4.jpg

Bios settings (Striker2X): VDimm -1.98V / NB 1.48V / SB auto / PLL auto / VTT 1.26V
In Everest these are: VDimm - 2.00V / NB 1.49V / SB 1.50V / PLL 1.52V / VTT 1.26V

Tried OC-ing them a little, & DDR2050 is how far I got them 1 pass Memtest-stable at 8-7-6-19-1T (2.08V BIOS - 2.13V Everest):

http://img141.imageshack.us/img141/7...dr32050dw9.jpg

I think I like these.. :up:
08-07-2008, 05:23 PM
day187

Mine are on the way :) cant wait, keep pushing
08-07-2008, 08:20 PM
slim142

Man I wouldnt go higher than 2.02 voltage (real). Even though they have a nice metal heatspreader, killing D9GTR is just.....
08-08-2008, 12:54 AM
Tyke

Received my kit this morning, 2 X 2GB with GTS chips! Gonna have a play about over the weekend.
08-08-2008, 01:02 AM
rabor

I didn't want to push them past 2.125V, but I didn't know how my S2X' vDimm settings would translate to Everest.. Though at 2.13V (according to Everest..) the heatspreaders hardly warm up, even if you touch them where the chips are located they are lukewarm at best..

They're just great that's what they are.. 'specially after my OCZ-debacle.

:cheer:

http://img220.imageshack.us/img220/5...trtechnlt5.jpg
08-08-2008, 02:06 AM
stealth

Hi,

Has anyone test this kit what is the highest speed can reach and with how much voltage?

http://www.hpm-computer.de/product_i...00-DIABLO.html

I hope they come soon here in Greece.

stealth
08-08-2008, 02:38 AM
M@G!C

Quote:

Originally Posted by stealth

Hi,

Has anyone test this kit what is the highest speed can reach and with how much voltage?

http://www.hpm-computer.de/product_i...00-DIABLO.html

I hope they come soon here in Greece.

stealth

Link is broken...
08-08-2008, 03:02 AM
stealth

Quote:

Originally Posted by M@G!C

Link is broken...

Works fine for me.

Here it is again:

http://www.hpm-computer.de/product_i...00-DIABLO.html

This is the Ram "CSX 2GB Kit DDR3-2000 DIABLO".

stealth
08-08-2008, 03:03 AM
rabor

Link works fine with me.. but they're cheaper over here + they got superfast shipping (DHL-Premium).
08-10-2008, 05:42 PM
slim142

Does anybody know of a site that will ship this to US?

Also, M@G!C, how is that memory on the striker so far?
08-10-2008, 09:05 PM
lolhalol

Does anyone know teh home page for CSX?
08-10-2008, 09:29 PM
jugeen

http://www.csx-memory.com/?language=en
08-11-2008, 09:21 AM
M@G!C

:woot::woot: Finally i found stability with this board!!! :yepp:

Running my 4GB CSX Diablo DDR3 at 1800FSB 8-8-8-19 linked and sinked P1 and P2 enable!!! My QX9650 is running at 3825 Mhz with only 1,3250v Vcore set on BIOS... not bad i think...
Memtest stable and Prime stable for 5 hours :rocker::rocker:
Also runned 3 loops of 3Dmark 2006 and played Crysis for 1 hour and.... ROCK STABLE! :wiggle::wiggle:
Will post some Everest bandwidth tests later... ( still priming as i post this) ... :D
I really tried tight timimgs 8-7-6 and 8-7-7 but gave me errors in Memtest and Prime 95 but i have not give up...:up:

http://img208.imageshack.us/img208/8769/32415446uq2.jpgD
08-12-2008, 01:42 AM
hecktic

so is jcool going to be the buying agent for XS members in USA & CAN ???/
08-12-2008, 01:56 AM
Achill3uS

im also testing my kits (2*1 GTR) on 790i (S2E) now, and its much more easy to make it stable than on intel P45 or X48, i can use less voltage for stability... that's what i've talked about upper, nforce is nforce :)
1800 7-6-5-18 1T P1&P2:enabled memtest stable @ 1.94v, 2000 7-6-6-18 1T boot & 1M 2M pass @ 2.24v
screens later... need to tweak them more...
08-12-2008, 02:45 AM
BulldogPO

Kasparz, how easy are heatspreaders to remove?
08-12-2008, 08:04 AM
Achill3uS

Quote:

Originally Posted by BulldogPO

Kasparz, how easy are heatspreaders to remove?

its really hard to remove the thermal tape wich CSX use on the Diablo, its really stable and the other side has some glue on 3 points if you have single sided module...
08-12-2008, 08:37 AM
slim142

Quote:

Originally Posted by Achill3uS

im also testing my kits (2*1 GTR) on 790i (S2E) now, and its much more easy to make it stable than on intel P45 or X48, i can use less voltage for stability... that's what i've talked about upper, nforce is nforce :)
1800 7-6-5-18 1T P1&P2:enabled memtest stable @ 1.94v, 2000 7-6-6-18 1T boot & 1M 2M pass @ 2.24v
screens later... need to tweak them more...

Is that the highest you can get it stable on the S2E?
08-12-2008, 09:43 PM
Achill3uS

Quote:

Originally Posted by slim142

Is that the highest you can get it stable on the S2E?

no, 2000 8-7-6 also rock stable around 2.0v, and i could bench @ 2100 8-7-6

btw, yesterday i've get off the hs of the diablos, baah its really needed to warm up till your fingers burn :D
08-13-2008, 12:27 AM
hecktic

Quote:

Originally Posted by hecktic

so is jcool going to be the buying agent for XS members in USA & CAN ???/

:rolleyes:
08-13-2008, 05:02 AM
jcool

Quote:

Originally Posted by hecktic

so is jcool going to be the buying agent for XS members in USA & CAN ???/

Actually I have no idea how shipment to the US works with customs and all.
But I do know someone who could be able to help, gotta ask him first though ;)

Also I'm not sure pricing is that attractive, given the current euro/dollar relation.
Anyone who's interested in getting these mems (and can't get it any other way) may contact me by PM, I guess...
08-13-2008, 05:36 AM
Achill3uS

its nice move from you jcool, but afaik there will be also available CSX soon. ;)
08-13-2008, 07:51 AM
slim142

Quote:

Originally Posted by Achill3uS

no, 2000 8-7-6 also rock stable around 2.0v, and i could bench @ 2100 8-7-6

btw, yesterday i've get off the hs of the diablos, baah its really needed to warm up till your fingers burn :D

Thats great to know :)
Btw, is there any small chance anybody could be able to try this in a 8Gb configuration with a Quad-Core on a S2E? That would really stress the NB and I would love to see how the S2E reacts to this.

Quote:

Originally Posted by jcool

Actually I have no idea how shipment to the US works with customs and all.
But I do know someone who could be able to help, gotta ask him first though ;)

Also I'm not sure pricing is that attractive, given the current euro/dollar relation.
Anyone who's interested in getting these mems (and can't get it any other way) may contact me by PM, I guess...

jcool
I want this memory so bad, but Im looking for GTR kits only. If you can give US people some help, it would be great ;)

Quote:

Originally Posted by Achill3uS

its nice move from you jcool, but afaik there will be also available CSX soon. ;)

Did they announce they coming to US?
08-13-2008, 08:32 AM
Achill3uS

if i will got some 4GB kits for testing i will do it :)

and no, they didnt announce it, ive just get you know about it, its in the plan to make CSX available in the US also.
08-13-2008, 08:39 AM
Kasparz

Quote:

Originally Posted by BulldogPO

Kasparz, how easy are heatspreaders to remove?

On Diablo you have to heat them up, on CEC it is very easy to remove.
08-13-2008, 09:21 AM
slim142

Quote:

Originally Posted by Achill3uS

if i will got some 4GB kits for testing i will do it :)

and no, they didnt announce it, ive just get you know about it, its in the plan to make CSX available in the US also.

Will look forward for that 8gb testing :D
Btw, if you get any ETA for the CSX in US, please let us know :)
08-13-2008, 09:34 AM
jcool

Current 4GB Diablo Kits carry D9GTS by the way.. just so you know.
At least that's what I got and what the German CSX rep told me.
08-13-2008, 09:37 AM
Kasparz

Quote:

Originally Posted by jcool

Current 4GB Diablo Kits carry D9GTS by the way.. just so you know.
At least that's what I got and what the German CSX rep told me.

You probably didn't read previous posts.
08-13-2008, 09:38 AM
slim142

Quote:

Originally Posted by jcool

Current 4GB Diablo Kits carry D9GTS by the way.. just so you know.
At least that's what I got and what the German CSX rep told me.

Yeah thats what I also heard from them. I can wait for GTR kits though.
08-13-2008, 09:42 AM
slim142

Quote:

Originally Posted by Kasparz

You probably didn't read previous posts.

So kits on stores are most probably GTR ICs. Kits from CSX website are most probably GTS right?

Im interested on GTR, nothing else. :D
08-13-2008, 09:50 AM
Kasparz

Why are you interested in GTR? Chips are both the same. GTR is like E8400, GTS is E8500. Both are same, you just get higher IC mfg bin in this case.
08-13-2008, 09:54 AM
slim142

Quote:

Originally Posted by Kasparz

Why are you interested in GTR? Chips are both the same. GTR is like E8400, GTS is E8500. Both are same, you just get higher IC mfg bin in this case.

So wait, GTS is actually better than GTR? I thought GTR was the (better)highed binned (1.33Ghz on GTR vs 1.06Ghz on GTS)

confused :confused:
08-13-2008, 09:58 AM
Kasparz

GTN is 800, GTR 1066, GTS 1333.
http://download.micron.com/pdf/datas...R3%20SDRAM.pdf
08-13-2008, 10:25 AM
slim142

Quote:

Originally Posted by Kasparz

GTN is 800, GTR 1066, GTS 1333.
http://download.micron.com/pdf/datas...R3%20SDRAM.pdf

Where in that huge document explains the GTN 800, GTR 1066 and GTS 1333? I couldnt find it anywhere...

Im confused since this is what the CSX Rep told me in the email I sent

Quote:

S and R are from the same chip family. The Base speed from Micron on S = 1066MHz. R Base speed is 1.33GHz

Oh well, jcool just told me GTS is more expensive so I think Kasparz you are right after all. GTN<GTR<GTS
08-13-2008, 10:32 AM
Kasparz

Quote:

Originally Posted by slim142

Where in that huge document explains the GTN 800, GTR 1066 and GTS 1333? I couldnt find it anywhere...

First page.
If you need FBGA decoder, there it is
http://www.micron.com/support/part_i.../decoder.aspx#
People felt in mass fault syndrome, information is available, so there is no need to ask anyone in forums. Google search takes few seconds, answer to anyone(me including) takes more than minute to write.
08-13-2008, 11:16 AM
rabor

Well,

my frakkin' %#@*^&&^$$##!! Striker 2 Extreme has done it again.. byebye my sweet Diablo's... :(

They ran about a week at stockspeeds & today they crapped out exactly the same way as 2 sets of OCZ Flex 2 DDR2000 & 1 set of Corsair XMS3-2000..

Man I hate this mainboard - it's 680i-mayhem all over again.. :cussing:
08-13-2008, 11:26 AM
slim142

I see... so I was wrong all this time thinking D9GTR was better. Well now that everything is clear, I think there is no problem getting GTS now :D

Thx Kasparz
08-13-2008, 11:29 AM
slim142

Quote:

Originally Posted by rabor

Well,

my frakkin' %#@*^&&^$$##!! Striker 2 Extreme has done it again.. byebye my sweet Diablo's... :(

They ran about a week at stockspeeds & today they crapped out exactly the same way as 2 sets of OCZ Flex 2 DDR2000 & 1 set of Corsair XMS3-2000..

Man I hate this mainboard - it's 680i-mayhem all over again.. :cussing:

Are you serious?
What voltage did you have your Diablos?
08-13-2008, 11:31 AM
M@G!C

Quote:

Originally Posted by rabor

Well,

my frakkin' %#@*^&&^$$##!! Striker 2 Extreme has done it again.. byebye my sweet Diablo's... :(

They ran about a week at stockspeeds & today they crapped out exactly the same way as 2 sets of OCZ Flex 2 DDR2000 & 1 set of Corsair XMS3-2000..

Man I hate this mainboard - it's 680i-mayhem all over again.. :cussing:

How do you know is the Board killing your memory?
Wich voltage where you running the sticks?
08-13-2008, 11:53 AM
Kasparz

Board is first what can kill memory, second is heat, third is voltage. Of course if voltage is within warranty limit.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 01:35 AM.

XtremeSystems