Asus P5Q3-Deluxe (P45)_625Mhz FSB_out_of_box

AC FSB TRY:
http://img119.imageshack.us/img119/9...3866id0.th.png
http://valid.x86-secret.com/show_oc.php?id=379953

Completely OOB mobo without any preps, seems to be nice enough for some high numbers as well.
Chasing ASUS Commando MB ? Possible, very easily:
http://img161.imageshack.us/img161/4...5970hm2.th.png
http://valid.x86-secret.com/show_oc.php?id=379965

Quote:

---

Originally Posted by Chri$ch

Bios 0704

CPU: 1.20v
CPU GTL: auto
FSB: 1.26v
PLL: 1.54v
NB: 1.46v
NB GTL: auto
SB: 1.10v
PCIe: 1.50v

---

is it 0704 for P5Q3 also ?

Quote:

---

Originally Posted by heliox

Hi guys!
Finally got mine too. I was having frequent reboots with the default bios settings. Just managed to get it stable by setting Dram voltage to 1.94V manually.

@over@locker886:
As I'm a complete noob in OC, can you recommand some Oc settings, please? We both have same mobo, CPU and RAM ;). I'll try them and give feedback to this forum.

---

Bios 0702

Strap: 333Mhz
Ram ratio: 5:6
Dram Read/Write Trainings: Disabled
Mem. OC Charger : enabled
PF Level: auto
Ai Boost : Lighter
CPU: 1.20v
CPU GTL: auto
FSB: 1.46v
PLL: 1.54v
NB: 1.5v
NB GTL: auto
SB: auto
PCIe: 100Mhz

CPU Skew: +300ps delay
NB Skew: +100ps delay

CPU/SATA speed spectrums: disabled

Asus P5Q-E Bios 0704

Bios Settings:

FSB: 625Mhz (up to 646FSB with clockgen)
PCIe: 100Mhz
Strap: Auto
Ram ratio: 1:1
Timings: 5-6-6-18
Dram static read control: disabled
Dram Write Trainings: disabled
Mem. OC Charger : enabled
PF Level: Auto
CPU: 1.2625v
CPU GTL: 0.61
FSB: 1.36v
PLL: 1.52v
NB: 1.52v
NB GTL: 0.545
SB: 1.10v
PCIe: 1.50v

Load-Line Calibration: disabled
CPU/SATA speed spectrums: disabled

CPU Skew: delay 300ps
NB Skew: delay 100ps

http://valid.x86-secret.com/cache/screenshot/380746.png

http://valid.x86-secret.com/show_oc.php?id=380746

Thanks a lot over@locker886 and Chri$ch for sharing your settings. That bios 0702, is it official?
I can see there are only 2 bios for P5Q3 Deluxe on their official site: 0611 and 0704. Did I miss anything here?
I'll try your settings this weekend.
By the way, I've put my 2 Sata2 Hard Disks on ICH10 ports(red) and the memory modules on orange slots. Is it ok, performance wise?

Quote:

---

Originally Posted by heliox

Thanks a lot over@locker886 and Chri$ch for sharing your settings. That bios 0702, is it official?
I can see there are only 2 bios for P5Q3 Deluxe on their official site: 0611 and 0704. Did I miss anything here?
I'll try your settings this weekend.
By the way, I've put my 2 Sata2 Hard Disks on ICH10 ports(red) and the memory modules on orange slots. Is it ok, performance wise?

---

Your welcome!;)

I'm not sure 0702 is official, but my settings good to for 0704.:up:

Black ramslots better for me, and haven't any problem with 36GB WD Raptor + 160GB WD Sata.;)

Quote:

---

Originally Posted by Chri$ch

Asus P5Q-E Bios 0704

Bios Settings:

FSB: 625Mhz (up to 646FSB with clockgen)
PCIe: 100Mhz
Strap: Auto
Ram ratio: 1:1
Timings: 5-6-6-18
Dram static read control: disabled
Dram Write Trainings: disabled
Mem. OC Charger : enabled
PF Level: Auto
CPU: 1.2625v
CPU GTL: 0.61
FSB: 1.36v
PLL: 1.52v
NB: 1.52v
NB GTL: 0.545
SB: 1.10v
PCIe: 1.50v

Load-Line Calibration: disabled
CPU/SATA speed spectrums: disabled

CPU Skew: delay 300ps
NB Skew: delay 100ps

http://valid.x86-secret.com/cache/screenshot/380746.png

http://valid.x86-secret.com/show_oc.php?id=380746

---

Impressive, nice job mate:up:

What was coolig on cpu?

Watercooling (water @ ~25-26°C) :)

Quote:

---

Originally Posted by Chri$ch

Watercooling (water @ ~25-26°C) :)

---

Great! :)
What is the max with dual channel memories?
Did you tried with single cpu core? Maybe 650+..:)

max with dual channel and 5-5-5-15 timings was 643FSB, so single channel didnt help much :D

how can i disable 1 core?

Thanks
Chris

Open msconfig (start>run),then go to boot.ini,advanced options and choose /NUMPROC= and set it to 1

Quote:

---

Originally Posted by Chri$ch

max with dual channel and 5-5-5-15 timings was 643FSB, so single channel didnt help much :D

how can i disable 1 core?

Thanks
Chris

---

Nice in dual..I'll try again this mobo..:D

run-> msconfig> boot.ini -> special settings-> numproc=1;)

mod: quake6 was faster:D

I like see this fsb but performance?

By now I can spi32m PL13 at 600fsb....this result is not nice...

This spi32m contest 4Ghz...my best time with p35 ddr2(dfi blood) is 11'06''

http://news.tecnocomputer.it/stuff/F...5_4000_600.JPG

This at 600fsb PL 13
Vnorth 1.36v
VTT 1.2v

http://news.tecnocomputer.it/stuff/F..._spi32_600.JPG



Ops....sorry...I see now This Thread is for p5q3:):) LOL

I think you must try at same cpu frequency.